NexusFi: Find Your Edge


Home Menu

 


Quotes by TradingView
Go Back   >  Downloads >  Search  > 

Categories Help    






Search Results
Searching for entries matching levels, looking in title and description, keywords for any words
Found 106 matching entries

Sort by
Page 1 of 3 123

Entries
ActiveGeoKingV1006 5 *
**New Version Sept 18/9 V1006**

Auto 3 Swing Indicator with toolbar and comprehensive support/resistance identification

**NOTE** The version has been updated. The previous version must be uninstalled before importing.
1.Open Ninjatrader 8
2.Click on TOOLS > REMOVE NINJASCRIPT ASSEMBLY
3.Select ActiveGeoking from the list and process removal
3.Import new ZIP file attached to this listing via TOOLS > IMPORT > NINJASCRIPT ADDON

Hope there are some traders out there that can benefit from this! I spent years perfecting this indicator while I was trading professionally and I am excited to share it with the community.

ActiveGeoking for NT8 leverages its own custom layer built on top of the zig zag indicator to automatically identify the three most relevant swings of any chart. A feature-rich toolbar allows the user to quickly shift the identified swings to their preference.

The identified swings are used to generate a wide array of technical price points based on Fibonacci retracements and extensions, as well as pivot highs and lows, trendlines and corrective/impulsive measured moves from Elliot wave theory. These price points can be considered areas of higher significance for the trader to consider potential future support and resistance to occur.

For anyone out there that is familiar with Bryce Gilmore's book "Trading to Win", this indicator will be recognised as highly aligned with his method of trading. The indicator utilizes an XABCD marking system, also common in other methods of TA.

Inbuilt algorithms detect when price points are invalidated by market movement so as not to display irrelevant price levels wherever possible.

Reporting of price points and swing measurements are all displayed on the screen and can be toggled on and off using the toolbar for all swing degrees and price level types.

The indicator options provide an exhaustive list of configuration options for tolerances and customized ratios for the user's preference.

**IMPORTANT** Ensure enough bars are loaded onto the chart as this indicator requires a decent amount of history for large degree swings
- 15 years for day charts
- 300 days for 60min
- 30 days for 5 min

Check out this thread below for guidelines on the indicators features which I will deliver in bite sizes pieces over time. Feel free to drop in and ask questions or provide feedback

NexusFi > Trading Community > Platforms and Indicators > NinjaTrader > Active GeoKing - Triple Auto Swing Indicator for NT8



Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: ActiveGeoKingV1006
Category: NinjaTrader 8 Indicators and More 


August 23rd, 2023
Size: 59.95 KB
Downloaded: 1288 times
ADE Vix, Tick, C_Tick, Tick Levels 5 *
Here are all the market internals indicators I use that have been requested by Spoos thread visitors.
1) You must have ADE Library installed and set up- sorry cant help you there.
2) You must have a 1 minute chart of Vix and $Tick running with the ADE Save indicator applied.
3) On the chart you want to display VIX, Cumulative Tick and Ade Tick indicator- apply Ade Tick and Ade Vix and Ade _CTick (C_Tick looks good on top of ADE Vix (no scaling) and note that the indicator is delayed 5 minutes in the morning before starting to allow it to a ccumulate)

4) Tick Levels should be overlayed on a chart of $Tick to highlight Zero, 600 and 1000 =/- levels

Attached image shows :
Left top= $Tick with Tick Levels Indicator
Left Bottom= ADE Tick

Right Top= ADE Vix with C_Tick overlayed (C_Tick set to no scaling)
Right Bottom- ADE Tick


Category The Elite Circle  		 
Suggest other entries I might like
Details: ADE Vix, Tick, C_Tick, Tick Levels
Category: The Elite Circle 


February 5th, 2016
Size: 243.10 KB
Downloaded: 731 times
ADXVMA (amaADXVMA) 5 *
Version 1.1 August 1, 2017

The Average Directional Index Variable Moving Average (ADXVMA) is a volatiltiy based moving average with the volatility being determined by the value of the ADX. The ADX provides levels of support during uptrends and resistance during downtrends. The indicator may also be used as a trendfilter. The trend can be positive, negative or neutral.

The ADXVMA that can be downloaded here may also be used with other input series than price. The trend can be shown via paint bars and is exposed as a public property.

Note: The ADXVMA has the trend exposed as a public property. This property can be accessed programmatically. However, it cannot be currently accessed via the market analyzer. In order to access the Trend series via the market analyzer, a specific MarketAnalyzerColumn is required. The MarketAnalyzerColumn is not yet included with the install file, as it has led to freezes with NT 8.0.8.0. The bug has been confirmed by NinjaTrader developers and only fixed with the latest release NT 8.0.9.0. (issue #12054). The market analyzer column and sound files for the ADXVMA will be availabe with a future update.


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: ADXVMA (amaADXVMA)
Category: NinjaTrader 8 Indicators and More 


October 21st, 2017
Size: 11.37 KB
Downloaded: 1631 times

Keywords: adaptive adx movingaverage resistance support vidya vma volatility
ALTOGomMP --> Several enhancements/features to GOM MP including Naked VPOC and Naked GAP. 5 *
Enhancements to GOM MP :

1. Added new SPLIT session mode, that will show AH and RTH profiles together in one chart. Works with other types as well.
2. Added Display profile levels such as Trading Session High, Trading Session Low, Mid, VPOC, Value Area High and Value Area Low
3. Added IB minutes parameter to allow you to set initial balance of your preference. IB parameter is turned off for AH session. IB won’t show if you have bar set to more than IB minutes.
4. Enhanced Developing VPOC function. Displays now straight progressing line for clear visibility.
5. Added Naked Vpoc levels with an option to display closed naked vpocs
6. Added Naked Close (GAP) levels with an option to display closed GAPS
7. Added option to display the naked level date and price level to the right panel
8. Added Summary section below the Profile that displays total profile volume with an option to format kilo, million and no formatting.
9. Added Summary section below the Profile that also display Initial Balance range and Daily range.
10. Added option to compute profiles for all bars on the chart vs on screen bars. This is important for naked levels in the past computation and display on screen without a need to squeeze the chart to naked level day.

Updated 05/21 :
Fixed IB settings for 24/7 & RTH Template;
[IB] summary level display adjustment dynamically to the top of the range.

Updated 05/22 :
Upgraded to GOMi's 4.6 version- Thanks to TimeTrade@BMT
Added a separate Pen style for dVPOC.

Updated 05/23 :
Fixed issue with the price display for currency and Bond markets

Updated 05/25 :
Added option to turn the status message off <8.13>
For this to work, additionally download and compile Hot Key Manager file from here GomHotKeyManager

Updated 05/26 :
Fixed Serialization problem for Fonts

Updated 05/27 :
Added toolbar buttons to set profile attributes.
Added option to show IB for overnight session
Added option to set color for summary text
Added option to set color for naked level text
Added option to show Continuous VA/VPOC/VWAP

Updated 05/28 :
Fixed the screen flicker issue

Updated 08/21 :
Attempt to fix performance problem reported during the RTH session start

First read details here : https://nexusfi.com/elite-circle/20321-altogommp-several-enhancements-features-gom-mp-including-naked-vpoc-naked-gap.html


Category The Elite Circle  		 
Suggest other entries I might like
Details: ALTOGomMP --> Several enhancements/features to GOM MP including Naked VPOC and Naked GAP.
Category: The Elite Circle 


August 21st, 2012
Size: 182.31 KB
Downloaded: 10969 times
BigBars3 4 *
Written by Dr Ben, ben_dot_szapiro_at_gmail_dot_com
Hide/Show coding from MindSet's EmaHide.cs script.

Please do not share the script outside the Elite Circle!

Superimpose Range, Renko or Minute Bars to a smaller bar size chart. I use it to look at larger bar sizes without distorting the equidistant bar spacing, and to confirm longer term trends. You can mix and match using BigBars on Range charts, minute charts, etc. The results will vary in live operation depending on COBC = true or false. The Show/Hide Button is activated by pressing the Shift key; after that the button will toggle between Show and Hide the BigBars' plots and boxes. The Show/Hide button makes the OHLC plots Visible/Transparent, and the High-Low,Open-Close boxes get shifted up by the HideOffset value. The default setting for HideOffset=200 Ticks would move the boxes outside the visible chart, but you can choose a smaller HideOffset to merely shift them slightly from the price bars. The "***" markers at the Current Bar location show where would the BigBar close Up or Down based on current price range, if applicable. You may override the first price of the session to some other value; specially useful to better align the BigBarsRenko Bricks with the significant price action/price levels. If StartingValue is left at zero the indicator will use its default Close[FirstBarOfSession].
Enjoy!


Category The Elite Circle  		 
Suggest other entries I might like
Details: BigBars3
Category: The Elite Circle 


February 21st, 2012
Size: 9.14 KB
Downloaded: 1076 times
BigConstantLines v1.1 5 *
BigConstantLines v1.1

Some traders use a lot of static levels that are sometimes far from current price.
Other want to always be reminded of Big Round Numbers, or quarters, halfs, etc.
Some want a mix of both.

BigConstantLines will use a starting price value (CenterLineValue) and automatically create lines 16 levels above, and 16 levels below using the AddPointsValue increments. OR, just enter each level manually leaving the CenterLineValue and AddPointsValue properties blank/zero.

One can also autopopulate and then override any level with a manually entered price. This may be a S/R level, Pivot, All Time High/Low, whatever. The indi can be added more than once in case there are some numbers from say daily/weekly/month charts that are significantly out of the current trading range, but that you want on the chart if you get there, or if you just want more than 33 levels.

Some instruments tend to move in pretty reliable patterns, say 25 handles. Pick a starting price
for CenterLineValue and enter 25 in the AddPointsValue, voila.

Note: Line17 is the CenterLine, and cannot be manually overridden when using the autopopulate mode.

(This is hack of the standard Constant Lines indicator. It's prolly gonna make your machine explode, create a new COVID variant, cause constipation, and remove all hope for whirled peas. Use at your own risk.)


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: BigConstantLines v1.1
Category: NinjaTrader 8 Indicators and More 


August 25th, 2021
Size: 4.42 KB
Downloaded: 79 times
BigConstantLines v1.1 5 *
BigConstantLines v1.1

Some traders use a lot of static levels that are sometimes far from current price.
Other want to always be reminded of Big Round Numbers, or quarters, halfs, etc.
Some want a mix of both.

BigConstantLines will use a starting price value (CenterLineValue) and automatically create lines 16 levels above, and 16 levels below using the AddPointsValue increments. OR, just enter each level manually leaving the CenterLineValue and AddPointsValue properties blank/zero.

One can also autopopulate and then override any level with a manually entered price. This may be a S/R level, Pivot, All Time High/Low, whatever. The indi can be added more than once in case there are some numbers from say daily/weekly/month charts that are significantly out of the current trading range, but that you want on the chart if you get there, or if you just want more than 33 levels.

Some instruments tend to move in pretty reliable patterns, say 25 handles. Pick a starting price
for CenterLineValue and enter 25 in the AddPointsValue, voila.

Note: Line17 is the CenterLine, and cannot be manually overridden when using the autopopulate mode.

(This is hack of the standard Constant Lines indicator. It's prolly gonna make your machine explode, create a new COVID variant, cause constipation, and remove all hope for whirled peas. Use at your own risk.)

Update: I've received some good suggestions. However I don't plan to implement any new features or changes, it does a certain thing well. Perhaps others will take this and add features to it, go nuts!

More than one request was for line color/thickness control. For this I suggest you add the indi to a chart, make whatever changes you want, and then save the Default template for the indi. Your custom settings will forever be saved and used on any chart you add the indi to moving forward.
Enjoy!


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: BigConstantLines v1.1
Category: NinjaTrader 8 Indicators and More 


August 25th, 2021
Size: 4.42 KB
Downloaded: 397 times
BigMike's BMT_Envelop in Easy Language Version 5 *
This is the EasyLanguage version of BMT_Envelop BigMike came up with.

I like the Averages & Fib Levels & since I use Tradestation, here is my version.

I made very minor changes for my use:
1. I changed 76.4% to 61.8%
2. I have commented the 100% & 161% plots (I find scaling of charts an issue with Tradestation)

Either of these changes can be un-commented very easily.

The inbuilt function in TS to get OHLC for the day is based on time so I had to customize to use sessions & have new functions attached as a part of ELD.

Enjoy!


Category The Elite Circle  		 
Suggest other entries I might like
Details: BigMike's BMT_Envelop in Easy Language Version
Category: The Elite Circle 


March 27th, 2011
Size: 22.59 KB
Downloaded: 522 times

Keywords: bmt easylanguage tradestation bigmike envelop
BMT Envelope Expansion Fib Bands v2.03 5 *
Attached is version 2.03. It does NOT work in NT 6.5 but does work in NT 7 with beta 22 or later.

Again, this is a major rewrite. Backup your old copy first, this one will overwrite it. If you don't like the new one you can go back to the old one this way.

There are two parameter options.

Multiplier - 1.0 is normal. If you feel the bands are too tight, you can raise this value, but it will no longer represent the real retracement levels of the daily ATR.

ATR Length - 7 is default. Lower will adapt more quickly to a changing market (like the recent huge fluctuations on CL). Higher will adapt slower.

I've added two extra bands to show the 100% and 161.8% levels. I've set the default colors the way I like them, which is different than the last version so take note. I also like the bands to blend into the chart, so the Alpha opacity is set for each plot.

You'll need to redo your template as the Plot names and settings have changed.

The histogram has been removed.

As far as I can tell, I've solved the math bugs. Please report any problems.

Mike

COMPATIBILITY:
NinjaTrader 6.5: NO
NinjaTrader 7.0: YES beta 22 or later only


Category The Elite Circle  		 
Suggest other entries I might like
Details: BMT Envelope Expansion Fib Bands v2.03
Category: The Elite Circle 


November 19th, 2010
Size: 8.20 KB
Downloaded: 2049 times

Keywords: bands envelope fibonacci
BMT Envelope Expansion Fibonacci Bands v2.02 5 *
Attached is version 2.02. It works in NT 6.5 and NT 7 prior to beta 23.

For NT7 after beta 23, go here: https://nexusfi.com/free_downloads/vip_elite_circle/737-download.html?view

Again, this is a major rewrite. Backup your old copy first, this one will overwrite it. If you don't like the new one you can go back to the old one this way.

There are two parameter options.

Multiplier - 1.0 is normal. If you feel the bands are too tight, you can raise this value, but it will no longer represent the real retracement levels of the daily ATR.

ATR Length - 7 is default. Lower will adapt more quickly to a changing market (like the recent huge fluctuations on CL). Higher will adapt slower.

I've added two extra bands to show the 100% and 161.8% levels. I've set the default colors the way I like them, which is different than the last version so take note. I also like the bands to blend into the chart, so the Alpha opacity is set for each plot.

You'll need to redo your template as the Plot names and settings have changed.

The histogram has been removed.

As far as I can tell, I've solved the math bugs. Please report any problems.

Mike

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: YES prior to beta 23 only

For NT7 after beta 23, go here: https://nexusfi.com/free_downloads/vip_elite_circle/737-download.html?view


Category The Elite Circle  		 
Suggest other entries I might like
Details: BMT Envelope Expansion Fibonacci Bands v2.02
Category: The Elite Circle 


February 5th, 2010
Size: 7.79 KB
Downloaded: 1761 times

Keywords: bands bmt envelope fibonacci
BMT Envelope Fib Bands 5 *
Feb 5 2010: Version 2.02 is available here and is also NT7 compatible.

This is for VIP users only.

Please do NOT distribute!

As always, I spend my time developing indicators to give to the VIP community, since it is those within the VIP community that are supporting BMT. If you share this indicator with someone else or on another website, it hurts me.

This indicator allows you to choose an SMA, EMA, HMA, WMA, VWMA, JMA or ZeroLagEMA and then paint fibonacci levels above/below that price.

You can choose two calculation methods. Method 1 uses 34, 55, and 89 for bands. Method 2 uses 38.2, 50.0, and 61.8.

Attached are some screens.

Please give me some feedback and let me know what you think.

BTW, this indicator does not repaint and it does work correctly with COBC false.

Mike

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO [feedback]


Category The Elite Circle  		 
Suggest other entries I might like
Details: BMT Envelope Fib Bands
Category: The Elite Circle 


December 3rd, 2009
Size: 26.87 KB
Downloaded: 1140 times

Keywords: bands envelope fibonacci bmt
Bollinger Bands in multiple timeframes 5 *
The BB's are based on a 20 SMA and 3x multiples thereof: 20 (green), 60 (blue), 180 (red), 540 (White or Black). They create natural SR levels since they are based on the statistical distance from the SMA.

A BB Cluster is when two or more outer BBs are synchronous... the more the stronger; the higher the TF, the stronger; the longer the chart TF, the stronger.

Good for seeing trend (or not); good for seeing possible SR (support/resistance); good for deciding when to exit (hint... HVS - high volume spike - on a 30 sec chart and price goes outside the bands on whatever TF you are watching... drop all but one and wait for the PB).


Category The Elite Circle  		 
Suggest other entries I might like
Details: Bollinger Bands in multiple timeframes
Category: The Elite Circle 


December 7th, 2010
Size: 23.69 KB
Downloaded: 1383 times

Keywords: bands bollinger multiple timeframes support/resistance
CADF (Cointegration - Augmented Dickey-Fuller Test) 5 *
Augmented Dickey-Fuller Cointegration Indicator, Version 1.01
5/23/2012: Moved ALGLIB routines to separate ALGLIB "Indicator". No functionality changes.

This is posted for BMT Elite Members Only. Please do not share or distribute.

This indicator plots the augmented Dickey-Fuller statistic for residuals from a cointegrating regression. It can be used to show the probability that the prices of 2 instruments are "cointegrated". It would normally be used on daily data with a fairly long period.

It is based on (and was tested against) MATLAB code by James P. Lesage, posted at https://www.spatial-econometrics.com

Some numerical methods use code from ALGLIB (required ALGLIB "Indicator" included)
See https://www.alglib.net/

Recommended Reading: "Quantitative Trading" by Ernest P. Chan
also his blog at https://epchan.blogspot.com

The horizontal lines plotted by the indicator are the "Critical Values" for 1% (lowest line), 5% and 10% (highest line) levels. The indicator plots the statistic; lower values represent increasing likelihood of cointegration.


Category The Elite Circle  		 
Suggest other entries I might like
Details: CADF (Cointegration - Augmented Dickey-Fuller Test)
Category: The Elite Circle 


May 16th, 2012
Size: 647.11 KB
Downloaded: 587 times
CCI Histogram Indicator Version 001 5 *
This is a modified version of CCI_Histogram_Sharky indicator.

I really like this indicator but I felt that it needed a more visual effect and broader range in levels.

-----------------------------------------------------------

Modified colors, placement of levels, settings.

Added CCI limits that goes beyond -100 or 100 and -200 or 200.

Added object types to draw when CCI goes beyond -100 or 100 and -200 or 200.

Object Types: Arrow, Dot, Diamond, Square, Triangle

Added object types to draw when CCI goes beyond -300 or 300.

Adding alignment of objects drawn.

-----------------------------------------------------------

When having "Calculate on bar close" set to False and having ShowObjects set to True it will paint erroneous painted objects. The reason for this is when price action blasts off and the CCI (let's say) hits above the 200 line it will paint the lime object and if price action reverses on the same bar which brings the CCI below the 200 line the object that got painted will stay. I haven't quit figured out how to code that portion of the code.

It's best to have "Calculate on bar close" set to True with ShowObjects = True.

It's best to have "Calculate on bar close" set to False with ShowObjects = False.

-----------------------------------------------------------

Other indicators on chart:
DoubleMAPaint_SharkyPkg
Swing

-----------------------------------------------------------

The indicator name is called CCI_Histogram_001.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NOT TESTED [feedback]


Category NinjaTrader 6.5 Indicators  		 
Suggest other entries I might like
Details: CCI Histogram Indicator Version 001
Category: NinjaTrader 6.5 Indicators 


October 8th, 2009
Size: 7.58 KB
Downloaded: 446 times

Keywords: cci jonesr9 ninjatrader
CCL Bar Pack 5 *
CCL is abbreviation for 'Confirmed CLose'. Years ago I rejected indicators - which I now I have a more friendly relationship with btw- and went into bars. The only trading seminar I went to was by Kent Calhoun who developed his 5 vertical bar trading pattern, essentially a 3 bar swing with some rules, but from which he designed some very effective strategies.

I modified his pattern to feature a 'confirmed close' meaning that only if the close takes out the low of the #4 bar (in a forming high swing) is the pattern verified. Very simple. But not so easy to code. Once that was done, you have the ShowMe included which plots confirmed by close (ccl) swing highs and lows color coded such that higher highs and higher lows are bullish color (for me yellow), LL and LH bearish and a swing whose high or low penetrates a previous one but whose close does not confirm is red, i.e. neither bullish nor bearish and often indicative of trend exhaustion, new trend change etc.

Then there are some Fib levels from those swings.

Also a set that project targets.

There's another one somewhere that determines long term trends by keep track of 'Active Highs' and 'Active Lows', i.e. a low whose developing swing made a higher high is Active until it is penetrated or a higher active low is formed. The trend is up until an active low is penetrated. In this way a bull market is defined as higher highs, and a bear market is defined as lower lows in that a bear market only starts if an active low is penetrated and a bull if an active high is penetrated. If/when I find it I will post it here without further explanation.

Picture shows the attached files in action. Colors are garish by TS8 and Ninja standards but some might find the swing patterns of interest. TS8 users will find they can be made to look quite elegant.

Also, they can be helpful for developing wave and other calculations because the swing points can be referenced. That said, Ninja has a very good swing high/low function, although I must say that the confirmed close business does filter out many bad swings, but doesn't always need multiples of ATR's (and 5-10 bars) to determine them.


Category TradeStation (hidden)  		 
Suggest other entries I might like
Details: CCL Bar Pack
Category: TradeStation (hidden) 


November 22nd, 2009
Size: 67.41 KB
Downloaded: 1088 times

Keywords: tradestation
Choppiness Index Optimized NT8.0.2 5 *


Choppiness Index Optimized NT8.0.2 Updated

Update 1.2 Dec 2016: Minor fix with Upper and Lower levels reversed.

There is a copy of this indicator at the NT8 forums but I went to town with optimizing it.

See this link for how to use it.



Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: Choppiness Index Optimized NT8.0.2
Category: NinjaTrader 8 Indicators and More 


December 17th, 2016
Size: 8.41 KB
Downloaded: 722 times
CMI Pivots and Fibonacci Levels
There are eight indicators in this package:

CMI CurrentDayOHL v7.5
CMI CurrentMonthOHL v7.5
CMI CurrentWeekOHL v7.5
CMI FibonacciDaily v7
CMI PivotsDailyDash v7.5
CMI PivotsDaily v7.5
CMI PivotsMonthly v7.5
CMI PivotsWeekly v7.5

I'm not the original author, but the programmer did good work and I use these on my own personal charts.

Mike

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO [feedback]


Category NinjaTrader 6.5 Indicators  		 
Suggest other entries I might like
Details: CMI Pivots and Fibonacci Levels
Category: NinjaTrader 6.5 Indicators 


November 22nd, 2009
Size: 74.50 KB
Downloaded: 654 times

Keywords: bmt cmi fibonacci ninjatrader pivot pivots points
Colored Stochastics with Alert 4 *
Stochastics colored by slope with alerts for user defined overbought and oversold levels.


(Commissioned by me, non - copyrighted)

NinjaTrader 6.5: YES - ZTrade101
NinjaTrader 7.0: YES - ZTrade101


Category The Elite Circle  		 
Suggest other entries I might like
Details: Colored Stochastics with Alert
Category: The Elite Circle 


February 5th, 2010
Size: 11.09 KB
Downloaded: 784 times

Keywords: itguy stochastics
CongestionBox4RangeNT8 5 *
Updated: 9/10/2016
Fixed problem with dataseries which prevented the indicator from being saved with the workspace.

Converted from the NT7 version. Originally design for range bars to box in those congestion areas produced by up and down bars that resulted from the market not going anywhere (it's not perfect).
But some folks had success using the indicator on minute charts.
The box is delayed and the red and green colors are even more delay but this was not meant to be a real time indicator.
Added public series to hold values for upper levels, lower levels, and bar numbers, to be accessed from
strategies.
Note: Right now the indicator do not show draw objects when added to a strategy using AddChartIndicator therefore ist's not going to draw rectangles on charts. Ninjatrader trader is aware of the bug and said it is already fixed and we will see it in the next release. Using Beta Version 8.0.0.8 (Multi-Broker).

Special thanks to Sirkin01 and philm for their ideas to help improve the indicator.


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: CongestionBox4RangeNT8
Category: NinjaTrader 8 Indicators and More 


February 15th, 2016
Size: 6.31 KB
Downloaded: 632 times
Constant Zones 3 *
This indicator draws user defined zones. The lower the opacity value, the more see thru the zone.

General Inputs

* AutoScale --> NinjaTrade autoscale feature as applied to all indicators.
* FontColor --> The color of the font which displays the region upper / lower values
* FontSize --> The size of the font which displays the region upper / lower values
* SpaceCount --> The amount of spaces between the end of the zone and the price text

Specific Inputs (ConstZone 1 - 9, A - E)

* CZ_Upper_zonenumber--> The upper bound of the region
* CZ_Lower_zonenumber --> The lower bound of the region
* CZ_Opacity_zonenumber --> The opacity of the region
* CZ_ShadeColor_zonenumber --> The color of the region

NinjaTrader 6.5: Not Sure - ZTrade101 - No errors in Output, but nothing happens
NinjaTrader 7.0: Some type of conflict on my system:Unknown- ZTrade101
Can someone else try it and report?


Category The Elite Circle  		 
Suggest other entries I might like
Details: Constant Zones
Category: The Elite Circle 


February 5th, 2010
Size: 3.79 KB
Downloaded: 491 times

Keywords: drawing itguy levels
ConstantZonesNT7 5 *
This indicator draws user defined zones. The lower the opacity value, the more see thru the zone.

General Inputs

* AutoScale --> NinjaTrade autoscale feature as applied to all indicators.
* FontColor --> The color of the font which displays the region upper / lower values
* FontSize --> The size of the font which displays the region upper / lower values
* SpaceCount --> The amount of spaces between the end of the zone and the price text

Specific Inputs (ConstZone 1 - 9, A - E)

* CZ_Upper_zonenumber--> The upper bound of the region
* CZ_Lower_zonenumber --> The lower bound of the region
* CZ_Opacity_zonenumber --> The opacity of the region
* CZ_ShadeColor_zonenumber --> The color of the region

NinjaTrader 7b9: Yes - ZTrade101 ( see 6.5 version for chart)

Category The Elite Circle  		 
Suggest other entries I might like
Details: ConstantZonesNT7
Category: The Elite Circle 


February 20th, 2010
Size: 3.96 KB
Downloaded: 368 times

Keywords: drawing itguy levels
Custom Fibonacci Floor Trader Pivots MC.NET 10 5 *
Here's a set of Fibonacci pivots built off of the Custom Floor Trader Pivots generously supplied by Japhro.

Fibonacci pivot points start just the same as standard pivot points. From the base pivot point, Fibonacci multiples of the high-low differential are added to form resistance levels and subtracted to form support levels.

PLN file is zipped to allow upload.


Category MultiCharts  		 
Suggest other entries I might like
Details: Custom Fibonacci Floor Trader Pivots MC.NET 10
Category: MultiCharts 


April 4th, 2017
Size: 3.61 KB
Downloaded: 201 times
Custom Support and Resistance Lines (for MultiCharts) - v1
This small indicator displays custom lines of S/R. It could be used during live trading.
For the sake of clarity, the S/R levels are not automatically calculated (for instance with swing pivots). The price levels and names are directly set by the user in the input fields.
The lines change color when they are above and below the candles (switch between support and resistance).
The lines have the politeness not to "cross" the candles, for a better display.

The input fields allow defining price level and title for 10 lines.

Related discussion thread: https://nexusfi.com/elite-circle/17162-multicharts-indicator-showing-custom-support-resistance-lines.html


Category The Elite Circle  		 
Suggest other entries I might like
Details: Custom Support and Resistance Lines (for MultiCharts) - v1
Category: The Elite Circle 


February 5th, 2012
Size: 9.81 KB
Downloaded: 216 times

Keywords: custom resistance support
Daily Ranges 5 *
This is a simple support and resistance indicator coded for me by @Cory (thank you again!)

You might consider using it for targets or for stop loss levels.


Category NinjaTrader 7 Indicators  		 
Suggest other entries I might like
Details: Daily Ranges
Category: NinjaTrader 7 Indicators 


January 12th, 2012
Size: 5.57 KB
Downloaded: 696 times
DOM_Bands_v1 3 *
Noticed when writing my trading journal (so glad I found this forum, thanks Mike, and all those I've learned from) I was constantly noting the DOM. So, decided to have an indicator that visualized it.

This is ladder based on jtRealStats code (NT downloads) and looks at the ending cumulative volume of bids and asks for each bar. In the code I limited the idx to the 5 levels above and below. Previous postings have noted that a equally-weighted and heavy DOM is one sign of Barb Wire (AL Brooks). Thus, a vaccum for your trading $$$.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NO (sam028)


Category NinjaTrader 6.5 Indicators  		 
Suggest other entries I might like
Details: DOM_Bands_v1
Category: NinjaTrader 6.5 Indicators 


January 7th, 2010
Size: 2.65 KB
Downloaded: 765 times

Keywords: brooks cumulative depth dom tape volume ztrade101
DoubleZero, customizable indicator showing '00 lines (for MultiCharts) - v1
This indicator for MultiCharts displays '00 lines.

Features:
- The '00 is customizable through the "MultiplesOf" parameter. The prices of the '00 lines are actually multiple of this parameter. For instance, if you want to draw all levels as 1350 (for ES), choose MultiplesOf = 10. If you want to draw all levels as 1.3200 (for EUR.USD), choose MultiplesOf = 0.01.
- All '00 lines are shown from two '00 levels above the highest candle of the whole chart down to two '00 levels below the lowest candle of the whole chart. So the relevant '00 levels are always available when you scroll the chart to the left or to the right.
- The lines change color when they are above and below the candles (switch between potential support and resistance).
- The lines have the politeness not to "cross" the candles, for a better display.

Related discussion thread: https://nexusfi.com/elite-circle/17630-multicharts-indicator-showing-00-lines-customizable.html


Category The Elite Circle  		 
Suggest other entries I might like
Details: DoubleZero, customizable indicator showing '00 lines (for MultiCharts) - v1
Category: The Elite Circle 


February 10th, 2012
Size: 27.31 KB
Downloaded: 78 times
Dynamic Fib Lines 5 *
This is an indie that plots dynamic fib lines on the chart. It is courtesy of https://www.coiledmarkets.com/ They gave me permission to share it here on the site.

Basically, in real time, the key fib levels are plotted. It is similar to the BigMike's FibEnvelope but it only changes if a new high/low is made, otherwise the fib lines remain flat.

I use it for possible chop identification and in theory, possible targets for intrafib trades. Once prices close and hold below/above extreme fib lines, a possible mega bearish/bullish run is in the works. Not always, but it is a good signal to perhaps look for bigger runs.

I use it on NT7, not sure if it works on 6.5 or not.

Works on any range chart, time based chart, volume or tick chart.

Includes plots for HOD and LOD.

This indie requires a restart of Ninja.

The indicator shows up in the indicator window as "MyDynamicPivots" NOT Dynamic Fib Lines.

Here is a video on how to use it.

https://www.coiledmarkets.com/070910-WS/CM%20DynamicPullback1/CM%20DynamicPullback1.html

EDITED by max :

NT 6.5: not tested - not sure if it works on 6.5 or not.
NT 7.0: Yes


Category The Elite Circle  		 
Suggest other entries I might like
Details: Dynamic Fib Lines
Category: The Elite Circle 


July 29th, 2010
Size: 8.18 KB
Downloaded: 2219 times

Keywords: fibs aztrader9
DynamicSRLines 5 *
This indicator draws horizontal Support/Resistance lines at various price levels, above and below the market, where price historically created swing High/Low pivots multiple times, creating support and resistance as price action bounced off of those levels.


Category NinjaTrader 7 Indicators  		 
Suggest other entries I might like
Details: DynamicSRLines
Category: NinjaTrader 7 Indicators 


April 12th, 2011
Size: 3.47 KB
Downloaded: 4631 times

Keywords: dynamic dynamicsrlines lines monpere sr
ECIVwap 5 *
This tool includes few VWAP based indicators :
* ECIVwap
* ECIVwapAnchorVwap
* ECIVwapChannel
* ECIVwapBracket

Version 1.4 Compiled under V1210.

The ECIVwap computes Volume Weighted Average Price for Daily/Weekly/Monthly/Quarterly/Yearly periods, and draws extensions of previous periods.
Vwap computation tries to be as accurate as possible since using volume at all prices in each bar, and is compatible with Sierra Vwap when using "Base on Underlying Data" option.
This is also true for the standard deviation calculation.

The ECIVwapAnchor uses Vwap computation algorithm, but the start and end dates are can be set in different ways (manually, automatically, at major reversal points, etc.).

The ECIVwapChannel uses Vwap computation algorithm, but draws a vwap channel of a user based period number of bars.

The ECIVwapBracket uses Vwap computation algorithm, and draws a vwap until price breaks out of bottom/top levels 4 (excess levels).

To install : download and unzip the archive. Put the DLL in C:\SierraChart\Data .

ECIVwap tools are shipped under GPL and also available in the SierraChart contributed studies.

Happy trading

W.


Category Sierra Chart  		 
Suggest other entries I might like
Details: ECIVwap
Category: Sierra Chart 


December 11th, 2014
Size: 44.23 KB
Downloaded: 1083 times
Ed's Levels Histogram V2.3 Updated 5 *
Ed's Levels Histogram V4V2.3 Updated

This is a port of Ed's Levels V4 from NT7.

Shows a histogram of the bid-ask levels, as appears on the DOM display.

Please see here for the Eds levels thread and my latest beta update (V4V4.2). This update will hopefully reduce multi-threading issues.

The options are self explanatory, however, you can adjust the positioning of the plot by setting "Buffer Right" and "Margin %".

I have added some more features including:

* A vertical column showing the current Bid/Ask pressure.

* A vertical column showing the current bar delta.

* Triangle symbols showing the current average of the bid and ask. (These fill if the average is > 1st standard deviation of the other).

* Standard deviation coloring.

Caveat:

Occasionally when starting with market replay an error is printed, although in practice this rarely occurs and generally works seamlessly.




Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: Ed's Levels Histogram V2.3 Updated
Category: NinjaTrader 8 Indicators and More 


October 30th, 2016
Size: 11.30 KB
Downloaded: 2071 times
FibConfluence 5 *
Exported using NT 7.0.0.10

dsFibConfluence is a NinjaTrader indicator which draws Fibonacci extensions from various high and low pivot points. The random lines create what is commonly known as the fib cluster or the fib confluence points. The Fibonacci confluences acts as a good support/resistance points.

dsFibConfluence uses the Zigzag function to detect the pivot points, and uses the pivots to draws three fib extention levels. One at 161.8%, the other at 261.8% and the last at 423.6% of the swing.

https://www.volumedigger.com/NinjaTrader/Indicators/dsFibConfluence.aspx


Category NinjaTrader 7 Indicators  		 
Suggest other entries I might like
Details: FibConfluence
Category: NinjaTrader 7 Indicators 


March 9th, 2010
Size: 7.55 KB
Downloaded: 1809 times
FibExtTool 4 *
Written by Dr Ben.
Please, do not share outside the Elite Circle!

A simple but very useful NT7 indicator, it will automatically draw and update a Fibonacci Extensions NinjaTrader Tool. When you apply this indicator to a chart, it will place a "X" marker in the "hidden" far right (drag the chart to the left if invisible) at the current Close, where it will remain inactive.

To activate the tool simply drag the "X" marker to the bar where the Anchor1 should be and it will draw the extension levels defined in your Default template. If the "X" marker is placed anywhere below and within +/- 2 bars of the intended pivot bar, it will draw the Fib Extensions using the Highest High after that bar as Anchor2 and the Lowest Low after Anchor2 as Anchor3. If this end point "ratchets" it will automatically update the levels.

Similar operation to draw down, place the "+" somewhere above the high of the pivot bar (Anchor1), and it will draw and update the Fib Extensions Levels using the Lowest Low (Anchor2) after that bar and the Highest High (Anchor3) after it.

To remove the Fib levels simply drag the "X" marker back past the current bar to its "hiding place". You can open several instances of the indicator to draw different possible starting extensions levels. The default marker symbol "X" can be replaced by any other text and style from your choosing and displaced right by the MarkerShift parameter from the indicator panel.

For proper operation you must set up your Fib Extensions levels in the Fibonacci Extensions Default template. Draw a Fibonacci Extension using the F9 shortcut, double-click on it, select Default in the template drop down, change the %s and styles to your preferred settings, then Right-Click on the panel to save them as the new Default settings, and you are ready to use it.


Category The Elite Circle  		 
Suggest other entries I might like
Details: FibExtTool
Category: The Elite Circle 


March 1st, 2012
Size: 2.48 KB
Downloaded: 855 times
Fibonacci Lines (Daily, Yesterday, Weekly) 5 *
Not earth-shattering, but handy nonetheless: Fibonacci Lines for different time periods.

The PowerLanguage file contains the following indicators:
  • Fibonacci Lines (Daily); this indicator plots the Fibonacci lines for the current day;
  • Fibonacci Lines (Yesterday); this indicator plots on the current day the Fibonacci lines for yesterday;
  • Fibonacci Lines (Weekly); as you guessed it, this indicator plots the weekly Fibonacci lines.
Each of these indicators have the following features:
  • Fibonacci lines 76.4%, 61.8%, 38.2%, 23.6% as well as the high, low, and 50% level;
  • Option to individually turn each of these lines off;
  • Fibonacci levels are rounded to the number of decimals of the instrument;
  • To keep MultiCharts as efficient as possible, the new Fibonacci levels are only calculated at the close at the bar instead of on every tick. You can change the code to calculate on every tick.
  • Option to only display the current Fibonacci levels and not those of the previous day(s). This prevents chart skewing at the beginning of the day, when the current price is some distance from the previous Fibonacci levels, which leads to ugly charts. (See the attached screenshot to see how not plotting the values for yesterday gives a much clearer chart).


Category MultiCharts  		 
Suggest other entries I might like
Details: Fibonacci Lines (Daily, Yesterday, Weekly)
Category: MultiCharts 


February 10th, 2012
Size: 24.68 KB
Downloaded: 532 times

Keywords: daily fibonacci resistance support weekly
FibRetTool v1.2 (with Alerts and Hide Button, Fixed Marker Color) 5 *
Written by Dr Ben.
Please, do not share outside the Elite Circle!


FibRetTool will automatically draw and update a Fibonacci Retracemets Tool.
When you apply this indicator to a chart, it will place a '+' marker in the 'hidden' far right (drag the chart to the left if invisible) at the current Close, where it will remain inactive.
To activate the tool simply drag the + marker to the bar where the Anchor1 should be and it will draw the extension levels defined in your Default template.
If the + marker is placed anywhere below and within +/- 2 bars of the intended pivot bar It will draw the Fib Retracemets using the Highest High after that bar.
If this end point 'ratchets' it will automatically update the levels.
Similar operation to draw down, place the + somewhere above the high of the pivot bar.
To remove the Fib levels simply drag the + marker back past the current bar to its 'hiding place'. You use the Show/Hide button (press the Shift key before clicking on the button) to make the Fib tool active or inactive. You can open several instances of the indicator to draw different possible starting extensions levels.
The default marker symbol + can be replaced by any other text and style from your choosing and displaced right by the MarkerShift parameter from the indicator panel.
For proper operation you must set up your Fib Extensions levels in the Fibonacci Extensions Default template. Draw a Fibonacci Extension using the F9 shortcut, double-click on it, select Default in the template drop down. Change the %s and styles to your preferred settings, then Right-Click on the panel to save them as the new Default settings, and you are ready to use it." You can also set up alerts (Fixed 38.2% and 61.8% and a user chosen LevelX, default 50%), with audio if you place the 3 sound files in the C:\Program Files (x86) \NinjaTrader 7 \sounds folder .

Marker Color works on this version.


Category The Elite Circle  		 
Suggest other entries I might like
Details: FibRetTool v1.2 (with Alerts and Hide Button, Fixed Marker Color)
Category: The Elite Circle 


March 1st, 2012
Size: 4.75 KB
Downloaded: 1370 times
Fibs From Prior Sessions V43 5 *
Exported using NT Version 7.0.1000.26

Indicators will only run on NT 7.0.1000.5 or later.

This is a family of 3 indicators to display fibonacci retracements and expansions calculated from the high and the low of the prior day, the prior week and the prior month. High and low can be taken from daily data or from intraday data. When taken from daily data, the order of the retracements may be inverted, when high and low were made on the same day.

Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are better adapted to dark chart backgrounds.

Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template retracements and expansions can be only calculated from the full session high and low. If you want to calculate retracements and expansions from the regular session, it is recommended to use a multi-session template that divides the day into the night session, regular session and after-session.

ETH: If you set the indicator to ETH, the retracements will be calculated from the high and the low of the full trading day. To avoid inverted levels best calculate all fibonacci lines from intraday data.

RTH: Please use a multi-session template. The retracements will be calculated from the selected RTH session. If the daily data supplied by your data supplier is regular session data, no multi-session template is required and you can display retracements and expansions calculated from the regular high and low by setting the indicator to "DailyBars".

Auto setting for the 3 indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.

Fibonacci Levels: The numerical values for the Fibonacci levels can be individually selected. If you need more than five retracement and expansion levels, you can add the indicator to your chart several times. If you do not wish to display some lines, please set the value for the Fibonacci ratio for these lines to zero, and the lines will not be plotted.

Display Options: Prior day's close, fibonacci retracements and fibonacci expansions can be switched on and off separately. The indicator further allows to display all plots for the prior days with or without labels. The label font size can be selected.

GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will use double day sessions for these days for all GLOBEX and NYMEX traded instruments.

Update December 15, 2013: Weekly and monthly indicators added. Daily indicator entirely recoded. Plots can now be displayed for several days. Holiday calendar added for 2014.
Update January 19, 2014: The ratios for the fib levels are now user selectable.
Update December 29, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators  		 
Suggest other entries I might like
Details: Fibs From Prior Sessions V43
Category: NinjaTrader 7 Indicators 


December 29th, 2014
Size: 35.00 KB
Downloaded: 3375 times

Keywords: close fibonacci low session expansions high retracements
Grid Trading Algo 1.0 for Multicharts
This is a Grid trading algo that sets levels based on the tick size, grid step, and grid size. This algo may be profitable with different settings depending on the instrument. I have released it here so it can be tested, modified, or improved into something better. It's very simple the code is simple and clear. I also will include a Grid Levels indicator so you can see where the levels are at.

Come discuss the Grid Trader Algo with me at my trading journal.
https://nexusfi.com/trading-journals/46850-elitecamper-s-micro-trading-journal.html


Category MultiCharts  		 
Suggest other entries I might like
Details: Grid Trading Algo 1.0 for Multicharts
Category: MultiCharts 


March 22nd, 2022
Size: 32.82 KB
Downloaded: 91 times

Keywords: algo bot grid indicator multicharts trading
HeikinAshi RSI Oscillator (HARSI) 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is the HARSI indicator, requested in THIS thread.

This indicator is a port from TradingView. This indicator was originally created by a gentleman named JayRogers. If you want more info on this indicator, go HERE.

Most of the items in the settings should be self-explanatory.

The customization for the horizontal lines, and plots are near the bottom of the UI, if the styling or levels need to be changed.

The Stochastic Ribbon(blue/red lines) is disabled by default. If you use the ribbon, and the ribbon is taller than you want, you can use the "Stoch Scaler" input to scale it to a percentage of its normal size.

The RSI histogram is the same as the regular RSI(yellow line), so the histogram is also disabled by default.

For coders interested in pulling the HA levels for strategies... The bars are created within onRender(), so there is no actual object for the bars on the chart. There is however, and exposed data series for the OHLC values of the HA bars. The four individual data series are called, openHA[0], highHA[0], lowHA[0], closeHA[0] respectively.

NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.


---EDIT - V2 13May2022---
*Added Null/Bars check to OnRender() method.
*Removed logic to attempt to automatically set the LINES for the Stochastics to transparent, when using 'ribbon' mode for the Stochastics. This might cause error in the case a user switches back and fourth.


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: HeikinAshi RSI Oscillator (HARSI)
Category: NinjaTrader 8 Indicators and More 


April 5th, 2022
Size: 13.22 KB
Downloaded: 1005 times

Keywords: ashi harsi heikin heikinashi rsi stochastic
Hilbert Sine Wave SR V1 for SierraChart 5 *
Support Resistance levels for Hilbert Sine Wave. It is derived from pbeguin's source code.


Category The Elite Circle  		 
Suggest other entries I might like
Details: Hilbert Sine Wave SR V1 for SierraChart
Category: The Elite Circle 


February 24th, 2012
Size: 4.93 KB
Downloaded: 429 times
Historical SR version 1.0 5 *
Here it is, my first indicator.

This indicator looks for levels where price has 'bounced' off of before. It then filters these levels by several user-controlled settings and groups nearby levels together to create SR zones (known as Groups in the parameters), and displays a rectangle to represent the SR zone. A single line within each SR zone represents the average price of the levels within.

By default the indicator looks at as much history as possible, so you will want to adjust the settings of your mt4 to hold as much historical data as possible.

You could also use this indicator with less history, to locate only levels where price has reacted recently.

Keep in mind that on charts without much history to the left, such as when price is breaking new ground, there will be fewer lines than on charts where price is revisiting areas recently traded.

Thread with information on the settings is here: https://nexusfi.com/elite-circle/2676-historical-support-resistance.html

I should mention that this is for mt4 not NT. An NT version is in the works.


Category The Elite Circle  		 
Suggest other entries I might like
Details: Historical SR version 1.0
Category: The Elite Circle 


February 15th, 2010
Size: 15.09 KB
Downloaded: 694 times

Keywords: goldstandard sr
Hourly Pivots (amaPivotsHourly) 5 *
Version 1.0 January 14, 2019

The Hourly Pivots indicator applies the calculation used for daily floor pivots to intraday time frames. The indicator displays pivots for any selectable period of N minutes. All pivots are calculated from the high, low and close of the prior N-minute period. The pivots can be displayed as floor pivots, wide pivots or Fibonacci pivots. The indicator further plots the pivot range, which is a value area derived from the prior N-minute period.

The default setting of the indicator is 60 minutes. With default settings the indicator will display hourly pivots including the Main Pivot PP, Central Pivot CP, Directional Pivot DP, Pivot Range, R1, R2, R3, R4 S1, S2, S3 and S4. The first period always starts with the daily session break. Depending on the period selected, the last period of the session may terminate before completion. It will not carry over to the first period of the next session.

Pivot range: The pivot range is the range between CP and DP. It is a symmetrical range around the main pivot PP.

Prior high, low and close: The indicator also displays the high, low and close for the prior N-minute period. These levels often act as support or resistance for the consecutive N-minute period.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X


Category NinjaTrader 8 Indicators and More  		 
Suggest other entries I might like
Details: Hourly Pivots (amaPivotsHourly)
Category: NinjaTrader 8 Indicators and More 


January 22nd, 2019
Size: 8.29 KB
Downloaded: 1458 times

Keywords: fibonacci floorpivots high hourly low pivots resistance support
 

Page 1 of 3 123


 
Category
  




© 2024 NexusFi™, s.a., All Rights Reserved.
Av Ricardo J. Alfaro, Century Tower, Panama City, Panama, Ph: +507 833-9432 (Panama and Intl), +1 888-312-3001 (USA and Canada)
All information is for educational use only and is not investment advice. There is a substantial risk of loss in trading commodity futures, stocks, options and foreign exchange products. Past performance is not indicative of future results.
About Us - Contact Us - Site Rules, Acceptable Use, and Terms and Conditions - Privacy Policy - Downloads - Top