Search

Categories

Show

Search Results

Searching for entries matching range, looking in title and description, keywords for any words
Found 278 matching entries

Page 13 of 28

« First

Last »

Entries

Kaufman Efficiency Ratio

This indicator is ported from on FatTails' Kaufman Efficiency Ratio indicator for NinjaTrader 7.

The Kaufman Efficiency Ratio shows the amount of "trendiness" versus chop. When the Efficiency Ratio crosses above the chop line, there is a trend. If the Efficiency Ratio crosses below that, the market is range bound.

Efficiency Ratio's above the horizontal chop line cause this line to be coloured yellow to help with the interpretation of chop vs trend.

Category MultiCharts

Details: Kaufman Efficiency Ratio
Category: MultiCharts

January 21st, 2012
Size: 8.71 KB
Downloaded: 529 times

Keywords: filter kaufman trend rangebound

KDJ Indicator

Exported Using NT7.0.1000.8

The first time that I saw KDJ Indicator it was part of the standard charting package on the main page used by TDAmeritrade. KDJ indicator is based on the standard Stochastics but it includes an extra line called J line.

The J line is a measure of divergence between %D and %K. The value of J can go beyond [0, 100] range. Values of J line over 100 or under 0 are supposedly the most bullish or bearish for larger swings (no wonder TDAmeritrade is using it for charting stock prices).

One needs to watch as the %D is in overbought and oversold areas (20 - 80). As long as the J line is beyond 0 and 100 percent and has not hooked up or down the price is going to remain in overbought or oversold area. One needs to consider to sell the overbought or buy the oversold when %D is above 80 or below 20 and J line begins to hook down or up. Other indicators such as momentum, volume, support and resistence, etc. need to be considered for confirmation.

Enjoy!

Category NinjaTrader 7 Indicators

Details: KDJ Indicator
Category: NinjaTrader 7 Indicators

January 31st, 2012
Size: 8.09 KB
Downloaded: 1270 times

Keltner Channel Strategy (EA)

This strategy uses Keltner Channels for buying and selling. If

Buying logic
An entry order to buy at the high price of the current bar will be generated if the current bar crosses the upper band.

Selling Logic
An entry order to sell at the low price of the current bar will be generated if the current bar crosses the lower band.

Here's a list of the inputs you will be able to modify when adding the EA:

Keltner Channel Indicator
Length = 20
Numatrs = 1.5 -> this value is multiplied by the average true range of the current bar to determine the distance from the upper and lower bands to the midline.

Other inputs / default values
Limit = 0
Stop = 0
Use SSL = False
Port = 25
Trailing Stop = 0
Email Alert = False

Category FXCM Strategy Trader (hidden)

Details: Keltner Channel Strategy (EA)
Category: FXCM Strategy Trader (hidden)

December 16th, 2010
Size: 3.35 KB
Downloaded: 167 times

Keywords: keltner channels

Keltner Universal V4

Exported using NT version 7.0.1000.27

This is a generalized version of the Keltner Channels with a few options added:

- The midband can be selected from a moving median, a moving mode or 27 different moving averages, all of which are calculated from the typical price.

- Midband and channels can be smoothed.

- The smoothing period for the range or the true range can be different from the period for the moving average.

- The indicator has an option to display the channels or the midband individually.

- All plots can be colored according to their slope, or alternatively all plots can be colored according to the slope of the midband.

- The slope color includes a neutral slope, which can be adjusted via a threshold.

- The area between the Keltner Channels can be shaded according to the slope of the midband.

- The trend derived from the midband slope can be displayed via paint bars.

Update July 3 2012: Midband can now be selected from a moving median, a moving mode or 27 different moving averages. Adjustable neutral zone added. Bands can be colored according to their own slope or slope of midband, midband and channels can be displayed individually.
Update July 5, 2012: Bug removed - Butterworth, Gauss and Supersmoother Fillter did not use the specified period.
Update August 20, 2012: Old version pf ADXVMA replaced with new version.
Update August 25, 2012: Paint bars added.
Update August 31, 2012: Ehlers Filter updated.
Update October 4, 2012: Ehlers and Gauss filters updated, moving mode removed. Channel and paintbar colors will now align, when indicator is displaced.
Update January 14, 2012: Second indicator added, which calculates upper band from high average and lower band from low average. Bug removed, which caused erroneous results when Butterworth, Gauss or Supersmoother options were used for calculating the average range or true range.
Update August 7, 2013: Tillson T3 added.
Update October 10, 2014: When paintbars were selected without showing the midband, occasionally some bars were set to transparent. Bug removed.
Update March 19, 2015: Slope trend exposed via public IntSeries.

Category NinjaTrader 7 Indicators

Details: Keltner Universal V4
Category: NinjaTrader 7 Indicators

March 19th, 2015
Size: 59.45 KB
Downloaded: 5248 times

Keywords: keltner keltnerchannel slope smoothing

KR_PriceLevels_v1 for ToS

here's a quick one.. inspired by range charts, but simplified and still painted on regular time charts..

i needed something to help me spot common S/R levels and also watch price moves between levels of either % of price or in blocks of a certain dollar value (0.2, 0.5, 1.0 ... etc)

default is to show moves in increment of 0.5% of all-time (based on chart) mid-price, but can be changed to better suit the time aggregation and the underlying price range we're looking at (for shorter timeframe, you may want to look at $.25 levels, for a stock like AAPL you want to look at a $5.0 increments and so on)

The percentage level value is always approximated to the nearest multiple of $0.1 to make it meaningful.

if there's a setting in Override Range Unit, then that's the one the study will use as a unit for the incermental levels.

you can show/hide the levels calc details labels on top using the study settings.

found it interesting and it helps hide a lot of noise from price - also comes closer to my own view of Darvas so thought to share for the Range Chart & breakout trading fans..
Cheers,
RedK

Category The Elite Circle

Details: KR_PriceLevels_v1 for ToS
Category: The Elite Circle

August 23rd, 2012
Size: 1.58 KB
Downloaded: 251 times

Keywords: breakout levels price range redk thinkorswim tos

K_SVAPO_v1 for ToS

Got my hands on ToS again, and we're back in business..

- here's a come-back gift...

This is my own ToS port of SVAPO (Short-Term Volume and Price Oscillator), a trading system introduced by Sylvain Vervoort that combines both volume and price trends to identify tradable setups - full details on the concept, and trade rules that he suggests are herehttps://stocata.org/ta_en/proprietary.html

took the concept and re-wrote it for ToS, using my own preferred techniques for smoothing and averaging - to achieve less lag and make the final plot more "friendly and usable" - while maintaining the overall original concept. (let me know if interested in exact details of the differences). also changed the resulting oscillator to a restricted range -100/+100 - no longer need to use the StdDev upper/lower lines..

the code is commented - the full details of how the original SVAPO can be used for signal generation are on web site above.

I also added the option to view the resulting plot in a Stepped mode or with an Inverse Fisher Transform - we still get almost no lag as we don't use unnecessary smoothing here. you can see how the signal (in this case crossing the zero line) is in line with the K_TraderRibbon on top, sometimes ahead of it.

suggestions for use:
use K_SVAPO along with a long-term trend indicator. if you set K_SVAPO correctly, it will provide unambigious signals on ideal entry points when the price retraces before continuing the trend.
you can also use 2 K_SVAPO, one longer and one shorter to provide a similar combo. in that case, i suggest you change one of them to the "Stepper" for easier viewing

as usual, appreciate if you keep in the forum. all feedback & comments welcome, as i'm still testing this anyways,

RedK

Category The Elite Circle

Details: K_SVAPO_v1 for ToS
Category: The Elite Circle

March 11th, 2013
Size: 2.04 KB
Downloaded: 658 times

Keywords: k_svapo oscillator price redk svapo tos volume

Line Alerts On Price & Indicators V3

Exported using NT 7.0.1000.25

This indicators allows you to enter user defined values, display them as horizontal lines and trigger alerts within a zone of several ticks or units around these lines.

The package includes two indicators:

- anaLineAlertsOnPrice
- anaLineAlertsOnIndicator.

Line Alerts On Price:

The indicator will automatically show up on the price panel. It can display up to 10 different alert lines. Each of the lines can be activated individually via the indicator dialogue box.

Sound alerts: When sounds are enabled, the indicator will generate sound alerts when one of the lines is approached. Sound files can be selected individually for each of the 10 alert lines.
E-mail alerts: When e-mails are enabled, the indicator will generate e-mail alerts when one of the lines is approached. For the e-mail feature you need to enter the sending and the destination e-mail via indicator dialogue box, and NinjaTrader should be enabled for sending e-mails under Tools -> Options -> Misc
Enabling lines: First enter an alert level and a label, then activate the line. Each line can be activated individually.
Trigger options: Cross_Above, Cross_Below & Cross_Above_Or_Below.
Offset in ticks: Allows to trigger an alert prior to the crossing of the line.
Rearm time: Can be set to avoid permanent triggering of alerts.

Line Alerts On Indicator:

The indicator can be used on other indicators and triggers an alert when the indicator value approaches the alert level. The referenced indicator should be used as the input series, and anaLineAlertsOnIndicator should be applied to the appropriate indicator panel manually.

Sound alerts: When sounds are enabled, the indicator will generate sound alerts when one of the lines is approached. Sound files can be selected individually for each of the 10 alert lines.
E-mail alerts: When e-mails are enabled, the indicator will generate e-mail alerts when one of the lines is approached. For the e-mail feature you need to enter the sending and the destination e-mail via indicator dialogue box, and NinjaTrader should be enabled for sending e-mails under Tools -> Options -> Misc
Enabling lines: First enter an alert level and a label, then activate the line. Each line can be activated individually.
Trigger options: Cross_Above, Cross_Below, Cross_Above_Or_Below, Larger_Than, Smaller_Than. The last two options should be used with histogram indicators such as volume.
Offset value: Allows to trigger an alert prior to the crossing of the line. The offset amount refers to the indicator scale.
Rearm time: Can be set to avoid permanent triggering of alerts.

Update July 28, 2011: Value 0 will be no longer displayed, if no values are entered for the second line. Number of lines reduced to 10. This is no restriction, as the indicator can be applied several times.
Update July 29, 2011: As lots of users tried to apply the lines to other indicators, I have added a version adapted for use with indicators.
Update August 3, 2011: Alert logic modified. Alert will fire when line is touched (offset = 0), or when a value is printed within the alert range (offset > 0).
Update December 7, 2011: A different sound file can now be selected for each of the lines. The user interface is improved.
Update September 20, 2012: For LineAlertsOnPrice option added to differentiate between Cross_Above and Cross_Below, for LineAlertsOnIndicator further option added for histograms, that is Larger_Than or Smaller_Than, new option added for e-mail alerts.
Update March 21, 2014: Small bug removed, indicator occasionally threw exceptions.
Update April 20, 2014: Values for price labels are now correctly display for interest futures in '16 / '32.
Update July 19, 2014: LineAlertsOnIndicator did not display all lines, when some of the alerts were disabled. Bug removed. LineAlertsOnPrice was not affected.

Category NinjaTrader 7 Indicators

Details: Line Alerts On Price & Indicators V3
Category: NinjaTrader 7 Indicators

July 19th, 2014
Size: 14.80 KB
Downloaded: 5952 times

Keywords: alerts horizontal lines resistance support

louiswelt

Many thanks to JonnyBoy who has converted the range bar marker "jtRangeMarker_N7" to NT8.

For range bars only. This indicator plots the maximum high or minimum low of a forming Range Bar. The plots disappear as soon as a new bar forms or the current bar has filled its required range. Draws a box around the current candle that indicates how much further a bar would have to move before the range is exhausted and new bar begins to paint.

Category NinjaTrader 8 Indicators and More

Details: louiswelt
Category: NinjaTrader 8 Indicators and More

September 22nd, 2020
Size: 3.63 KB
Downloaded: 293 times

Keywords: counter jtrangemaker range rangemaker

MA Multi Time Frame (MTF) Indicator

Based on Ninja SampleMultiTimeFrame strategy + guidance from Ryan/Josh/Brett (Ninja support team), I was able to develop a simple MTF indicator capturing some MA entry requirements of a higher time frame (5-Range) and have a visual alert (text label) plotting on a lower time frame (3-Range) chart. It serves to remind me stay with Trend Direction and no counter-trend trades.

It took me over a month lol! I am hoping this simple indicator will shed light to those who are still trying.

Indicator will only run on NT 7.0.1000.5 or later

Category NinjaTrader 7 Indicators

Details: MA Multi Time Frame (MTF) Indicator
Category: NinjaTrader 7 Indicators

July 13th, 2011
Size: 3.76 KB
Downloaded: 973 times

Keywords: ma mtf

Market Profile

Exported using NT Version 7.0.1000.14

Submitted by ivatan1962 09-11-2013 on the Ninjatrader Forum

Description
Market Profile, IB, Open Range, TPO, Price Histogram, Value Area, POC, Virgin POC, Volume Histogram.
Important: Not final version, tested with ES, not
sure it will work with other instruments.Please feel free to report any issues, suggestions, etc.

To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu File > Utilities > Import NinjaScript
3. Select the downloaded file

Category NinjaTrader 7 Indicators

Details: Market Profile
Category: NinjaTrader 7 Indicators

March 28th, 2014
Size: 14.48 KB
Downloaded: 3134 times

Keywords: market profile

Page 13 of 28

« First

Last »