Search

Categories

Show

Search Results

Searching for entries matching Vwap bands, looking in title and description, keywords for any words
Found 122 matching entries

Page 6 of 13

« First

Last »

Entries

GomMP Market Profile indicator v2.1

See Thread:

https://nexusfi.com/elite-circle/3737-gommp-market-profile-indicator.html

This indicator which requires GomPackage plots volume profiles.

User can select Bar or Daily profiles
User can plot profile of all volume since a certain date
Profiles can be colored to indicate time of the trades
Profiles can plot delta of the bar
Profiles can be smoothed to filter noise
Profiles can be plotted left to right or right to left.
Profiles can include/exclude AH volume
POC, VAH, VAL, VWAP can be plotted
High and Low volume Nodes can be plotted

GomPackage can be found here:
NinjaTrader Support Forum - View Single Post - All GomRecorder Indicators

Also see Volume Ladder For NT Thread

Works in NT 6.5 and NT 7

Category The Elite Circle

Details: GomMP Market Profile indicator v2.1
Category: The Elite Circle

May 16th, 2010
Size: 8.77 KB
Downloaded: 4846 times

Keywords: gom gomi gompackage gomrecorder marketprofile

hVWAP version 1

A recent modification of the VWAP that allows you to save start and end times in templates, plus has multipliers for the SD bands and a couple of other features.

Picture shows a few other things, but the new hVWAP is the thick Magenta line and its SD bands are in similar color.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NOT TESTED [feedback]

Category NinjaTrader 6.5 Indicators

Details: hVWAP version 1
Category: NinjaTrader 6.5 Indicators

December 21st, 2009
Size: 6.40 KB
Downloaded: 426 times

Keywords: cclsys ninjatrader vwap

improved Keltner Channel and Bollinger Bands

Version: 20150901

Improvements comparing to out-of-box BB and KC indicators:
1) It is rewritten based on underlying functions, so that when you need to write strategy, you can call the function directly.
2) it gives you choice of moving average type. I only enable EMA and SMA, but you can add more with simple coding.
3) the mid line can be in two colors when it is up/down from last bar.

Category MultiCharts

Details: improved Keltner Channel and Bollinger Bands
Category: MultiCharts

September 1st, 2015
Size: 4.37 KB
Downloaded: 431 times

Initial Balance Range Bands V42

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later.

Discretionary traders: Please use the multi-timeframe version of the indicator for odd minute charts and charts built from ticks.

https://nexusfi.com/download/ninjatrader-7/indicators/938-download.html?view

The indicator displays the current open, the initial balance (IB) and upper and lower range bands that are calculated by adding and subtracting fractions of the initial balance to the IB high and IB low.

You can only use this indicator with an appropriate session template. The opening time will align itself to the start time of the RTH session, as specified via session template. The hybrid setting assumes that you want to use the 3rd intraday session as RTH session for FOREX and currency futures and the second session for all other instruments.

Example ES: Select a session template with the following sessions: Session 1 (night session) 15:30 - 8:30 Central Time, Session 2 (RTH) 8:30 - 15:15 Central Time. Select second session for opening range.

Select length of opening period: The length of the opening range can be selected via indicator dialogue box The default setting is 60 minutes.

Select Offset: With an offset of 00:00, the indicator aligns to the start of the selected session. If you enter a positive value for the offset, the opening range will be shifted forward from the session start. For example if you open a chart for ES with the session template US CME Index Futures, then the session (and the trading day) starts at 5:00 PM Central Time. To display an opening range for the regular session, you need to enter an offset of 15:30, because the regular session starts 15 hours and 30 minutes after the start of the trading day.

Multipliers for range bands: The multipliers for the upper and lower range bands can also be changed. The default settings for the bands are 0.5, 1 and 2, meaning that the first upper band is built from the IB high by adding half of the IB range, and similar for the other bands.

Developing range: Prior to the completion of the initial balance, the indicator plots the developing range in gray to show that the range is still incomplete.

Night session or pre-session range: The indicator also has an option to display the full night session, European or Asian session range. This feature is not used with the default settings. I did not add it on purpose, it was already part of the opening range indicator, and it was easier to leave it than to remove it.

European Session Range: You can select start and end time of the European Session in CET (Central European Time). The European Session is pre-configured for the time between 8:00 AM and 1:00 PM CET.

Asian Session Range: You can select start and end time of the Asian Session in TST (Tokyo Standard Time). The Asian Session is pre-configured for the time between 9:00 AM and 3:00 PM TST.

Update June 2, 2011: New signature for GetNextBeginEnd() implemented.
Update June 11, 2011: Small bug removed, indicator did not display opening range and pre-session range correctly during the training period (first bars of the chart, after scrolling to the left horizontally).
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 25, 2011: Serialization of the plots and indicator dialogue box changed.
Update January 24, 2012: Offset added, opening period no longer needs to be aligned to session start.
Update February 19, 2012: Option added to cut off the opening range at the next session break.
Update October 6, 2013: Minor bug removed, offset was not applied correctly on tick charts, when indicator was set to COBC = false.
Update October 24, 2013: Drop down property added for European and Asian Time Zone
Update December 8, 2013: Indicator partly recoded and custom plot added.

Category NinjaTrader 7 Indicators

Details: Initial Balance Range Bands V42
Category: NinjaTrader 7 Indicators

December 9th, 2013
Size: 11.10 KB
Downloaded: 4345 times

Keywords: initialbalance open openingrange rangebands volatility

Initial Balance Range Bands V42 MTF

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later.

The indicator displays the current open, the initial balance (IB) and upper and lower range bands that are calculated by adding and subtracting fractions of the initial balance to the IB high and IB low. This version is a multi-timeframe (MTF) version of the standard Initial Balance Range Bands V42 indicator. The indicator adds a second minute bar series to the chart, which is used to calculate the initial balance. It has the following advantages over the standard version:

For tick, range and volume charts: The standard indicator may not display the initial balance correctly, if the last bar expands the initial balance and closes after the opening period. The MTF version of the indicator will display the initial balance correctly, even if the primary bar series does not contain the necessary information for its calculation. An example is shown on the chart attached.

Use with minute charts: You want to use this indicator with minute charts, if the opening period is not an integer multiple of the bar period. Example: You trade 7 min charts and your opening period is 30 minutes.

You can only use this indicator with an appropriate session template. The opening time will align itself to the start time of the RTH session, as specified via session template. The hybrid setting assumes that you want to use the 3rd intraday session as RTH session for FOREX and currency futures and the second session for all other instruments.

Example ES: Select a session template with the following sessions: Session 1 (night session) 15:30 - 8:30 Central Time, Session 2 (RTH) 8:30 - 15:15 Central Time. Select second session for opening range.

Select length of opening period: The length of the period for establishing the initial balance can be selected via indicator dialogue box. The default setting is 60 minutes.

Select Offset: With an offset of 00:00, the indicator aligns to the start of the selected session. If you enter a positive value for the offset, the opening range will be shifted forward from the session start. For example if you open a chart for ES with the session template US CME Index Futures, then the session (and the trading day) starts at 5:00 PM Central Time. To display an opening range for the regular session, you need to enter an offset of 15:30, because the regular session starts 15 hours and 30 minutes after the start of the trading day.

Multipliers for range bands: The multipliers for the upper and lower range bands can also be changed. The default settings for the bands are 0.5, 1 and 2, meaning that the first upper band is built from the IB high by adding half of the IB range, and similar for the other bands.

Display regular open or one-minute-range: The indicator allows to either display the regular open or the range of the first minute of trading after the start time selected for the opening range.

Developing range: Prior to the completion of the opening range, the indicator plots the developing range in gray to show that the range is still incomplete.

Night session or pre-session range: The indicator also has an option to display the full night session, European or Asian session range. This feature is not used with the default settings. I did not add it on purpose, it was already part of the opening range indicator, and it was easier to leave it than to remove it.

European Session Range: You can select start and end time of the European Session in CET (Central European Time). The European Session is pre-configured for the time between 8:00 AM and 1:00 PM CET.

Asian Session Range: You can select start and end time of the Asian Session in TST (Tokyo Standard Time). The Asian Session is pre-configured for the time between 9:00 AM and 3:00 PM TST.

Update July 25, 2011: Serialization of the plots and indicator dialogue box changed.
Update December 8, 2013: Indicator entirely recoded. Offset added, opening period no longer needs to be aligned to the session start. Drop down property added for time zones. Custom plot added.
Update March 15, 2015: Regular open and minute range were drawn back to start of trading day on tick charts. Bug removed.

Category NinjaTrader 7 Indicators

Details: Initial Balance Range Bands V42 MTF
Category: NinjaTrader 7 Indicators

March 15th, 2015
Size: 13.19 KB
Downloaded: 3362 times

Keywords: initialbalance open rangebands mtf openingrange volatility

jprBollingerBands

This is an add on to the standard Bollinger Bands Script. The enhancement allows the user to choose from any of the following Moving Averages.

EMA,
SMA,
HMA,
WMA,
DEMA,
TMA,
TEMA,
VWMA,
ZLEMA

Category NinjaTrader 8 Indicators and More

Details: jprBollingerBands
Category: NinjaTrader 8 Indicators and More

October 3rd, 2021
Size: 16.63 KB
Downloaded: 328 times

Keywords: average bands bollinger moving deviation

KAMA Bands v1

Multiple KAMA lines.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: [COLOR=#0000ff]NOT TESTED [feedback][/COLOR]

Category NinjaTrader 6.5 Indicators

Details: KAMA Bands v1
Category: NinjaTrader 6.5 Indicators

June 19th, 2009
Size: 5.97 KB
Downloaded: 412 times

Keywords: cory kama ninjatrader

Keltner Channel Strategy (EA)

This strategy uses Keltner Channels for buying and selling. If

Buying logic
An entry order to buy at the high price of the current bar will be generated if the current bar crosses the upper band.

Selling Logic
An entry order to sell at the low price of the current bar will be generated if the current bar crosses the lower band.

Here's a list of the inputs you will be able to modify when adding the EA:

Keltner Channel Indicator
Length = 20
Numatrs = 1.5 -> this value is multiplied by the average true range of the current bar to determine the distance from the upper and lower bands to the midline.

Other inputs / default values
Limit = 0
Stop = 0
Use SSL = False
Port = 25
Trailing Stop = 0
Email Alert = False

Category FXCM Strategy Trader (hidden)

Details: Keltner Channel Strategy (EA)
Category: FXCM Strategy Trader (hidden)

December 16th, 2010
Size: 3.35 KB
Downloaded: 167 times

Keywords: keltner channels

Keltner Universal V4

Exported using NT version 7.0.1000.27

This is a generalized version of the Keltner Channels with a few options added:

- The midband can be selected from a moving median, a moving mode or 27 different moving averages, all of which are calculated from the typical price.

- Midband and channels can be smoothed.

- The smoothing period for the range or the true range can be different from the period for the moving average.

- The indicator has an option to display the channels or the midband individually.

- All plots can be colored according to their slope, or alternatively all plots can be colored according to the slope of the midband.

- The slope color includes a neutral slope, which can be adjusted via a threshold.

- The area between the Keltner Channels can be shaded according to the slope of the midband.

- The trend derived from the midband slope can be displayed via paint bars.

Update July 3 2012: Midband can now be selected from a moving median, a moving mode or 27 different moving averages. Adjustable neutral zone added. Bands can be colored according to their own slope or slope of midband, midband and channels can be displayed individually.
Update July 5, 2012: Bug removed - Butterworth, Gauss and Supersmoother Fillter did not use the specified period.
Update August 20, 2012: Old version pf ADXVMA replaced with new version.
Update August 25, 2012: Paint bars added.
Update August 31, 2012: Ehlers Filter updated.
Update October 4, 2012: Ehlers and Gauss filters updated, moving mode removed. Channel and paintbar colors will now align, when indicator is displaced.
Update January 14, 2012: Second indicator added, which calculates upper band from high average and lower band from low average. Bug removed, which caused erroneous results when Butterworth, Gauss or Supersmoother options were used for calculating the average range or true range.
Update August 7, 2013: Tillson T3 added.
Update October 10, 2014: When paintbars were selected without showing the midband, occasionally some bars were set to transparent. Bug removed.
Update March 19, 2015: Slope trend exposed via public IntSeries.

Category NinjaTrader 7 Indicators

Details: Keltner Universal V4
Category: NinjaTrader 7 Indicators

March 19th, 2015
Size: 59.45 KB
Downloaded: 5248 times

Keywords: keltner keltnerchannel slope smoothing

Ladder 1k Vol Template with DOM Bands, etc.

Template for Volume ladder. DOMBands version is in Elite, DOMBands normal is in regular downloads and can be substituted.

Category NinjaTrader 7 Templates

Details: Ladder 1k Vol Template with DOM Bands, etc.
Category: NinjaTrader 7 Templates

April 1st, 2010
Size: 43.79 KB
Downloaded: 1552 times

Keywords: ladder template ztrade101

Page 6 of 13

« First

Last »