R7: 2/28/2022: I normalized Bands to accommodate fractional TickSize.
R6a: 6/23/2021 - Fixed the background not shading properly and the column number setting.
R5: 1/27/2021 - Added the calculation and display of the range from High to Low inside bands.
R4: 4/10/2020 - NT made some changes that caused errors with some indies. I took care of the error with this rev. When the button hides the indie, you need to hit f5 to hide the background color. If someone knows how to fix this... let me know.
R3:12/20/2018 - I added a switch to show or hide the indicator. I renamed it to ADXVMAButtonBand.
R2: 9/23/2018- I noticed a small error when displaying the Period in the title block.
R1: 2/22/2018- I found an error in how larger user inputs were being handled for the volatility band multipliers. If you were using < 4 multiplier, then you will not see a difference.
Hello Traders, I have added color and Volatility (Keltner-esk) Channels to the popular ADXVMA. You can select your colors for an Up trend, Down trend or Neutral. The Keltner Bands can be colored and set to the multipliers that you prefer. In the picture, the ADXVMA is set to 5 periods and the bands are set to 1.5 for the inner band and 2.5 for the outer band. The background can also be shaded to same colors as the lines.
Many Thanks to Zondor for the original NT8 coding of the ADXVMA.
March 5th, 2017
Size: 20.61 KB
Downloaded: 1166 times
1838
bobc635
Here's a ADXVMA indicator with bands (similar to Keltner Channel). I've put this together in NT 6.5, but I've checked and it imports into NT 7 without any problems, and as far as I can tell it does not repaint. Please let me know if you have any comments.
December 9th, 2010
Size: 5.12 KB
Downloaded: 1147 times
759
john2000
Enhancements to GOM MP :
1. Added new SPLIT session mode, that will show AH and RTH profiles together in one chart. Works with other types as well.
2. Added Display profile levels such as Trading Session High, Trading Session Low, Mid, VPOC, Value Area High and Value Area Low
3. Added IB minutes parameter to allow you to set initial balance of your preference. IB parameter is turned off for AH session. IB won’t show if you have bar set to more than IB minutes.
4. Enhanced Developing VPOC function. Displays now straight progressing line for clear visibility.
5. Added Naked Vpoc levels with an option to display closed naked vpocs
6. Added Naked Close (GAP) levels with an option to display closed GAPS
7. Added option to display the naked level date and price level to the right panel
8. Added Summary section below the Profile that displays total profile volume with an option to format kilo, million and no formatting.
9. Added Summary section below the Profile that also display Initial Balance range and Daily range.
10. Added option to compute profiles for all bars on the chart vs on screen bars. This is important for naked levels in the past computation and display on screen without a need to squeeze the chart to naked level day.
Updated 05/21 :
Fixed IB settings for 24/7 & RTH Template;
[IB] summary level display adjustment dynamically to the top of the range.
Updated 05/22 :
Upgraded to GOMi's 4.6 version- Thanks to TimeTrade@BMT
Added a separate Pen style for dVPOC.
Updated 05/23 :
Fixed issue with the price display for currency and Bond markets
Updated 05/25 :
Added option to turn the status message off <8.13>
For this to work, additionally download and compile Hot Key Manager file from here GomHotKeyManager
Updated 05/26 :
Fixed Serialization problem for Fonts
Updated 05/27 :
Added toolbar buttons to set profile attributes.
Added option to show IB for overnight session
Added option to set color for summary text
Added option to set color for naked level text
Added option to show Continuous VA/VPOC/VWAP
Updated 05/28 :
Fixed the screen flicker issue
Updated 08/21 :
Attempt to fix performance problem reported during the RTH session start
January 3rd, 2010
Size: 2.99 KB
Downloaded: 166 times
257
websouth
Here's an interesting indicator created by James Stanley of DailyFX. The oscillator measures the difference between the upper and lower bollinger bands. A moving average of the same length as the bollinger band is also plotted over the oscillator.
If the oscillator is greater than the moving average, it indicates the trend is accelerating.
If the oscillator is less than the moving average, it indicates the trend is decelerating.
March 25th, 2016
Size: 6.24 KB
Downloaded: 451 times
1722
elechim72
Very simple MACD/Keltner system. Keltner bands are 20/0.5.
Entry: MACD crossover (OR) MACD higher than MACD average (AND) MACD slope rising for longs (AND) price above Keltner upper band (20/0.5) [discretionary: (AND) price higher than 8 MA]
(Reverse for short)
Exit: Keltner crossing midline, [Discretionary: MACD crossover average (OR) price cross under 8 MA]
I am back testing the system and it works best on 1000 tick charts. However, it performs on 150 tick charts, just takes too many losing trades. Key to the system is "let the winners run." You can incur lots of small losses before a winning trade on smaller time frames.
August 17th, 2016 05:15 PM gentech Many thanks to you for this! I've been testing it out and it's very promising, particularly for order flow trading.
June 5th, 2016 05:29 AM dilbert618 Thank you
March 25th, 2016 04:05 PM Herbert Thank you
July 17th, 2015 06:05 PM ShaunG Thanks for the indicator! I have been looking for something to help me set my stop parameters based on the ATR reading.
Looks like this might be exactly what I am looking for. Thanks for your “indi”, will let you know how it works out. Kind
regards.
December 6th, 2014 01:40 AM Trader for Life Thanks!
February 25th, 2017 12:27 PM essiar Not sure what I am doing wrong here, I have imported .cs files previously. I am trying to install ALTOGomMP.cs. I alread
y have GomCD, GomCDSMA_UpDown, GomDeltaVol_UpDown and GomRecorderIndicator in my list of indicators. I keep getting erro
r msg CS0246 which states there is a dll file missing. So when I try to install GomMP2.1 I get an error msg stating I ha
ve custom ninjascript files on my pc that have programming errors. So I delete ALTOgom.cs from the bin. I go to import G
omMP2.1 again and I get another error msg saying Archive may contain duplicate method names that already exist or there
is a required file missing. I have been using Ninja for 10 years now and have never run into this issue. Suggestions?
October 13th, 2016 03:28 PM CoCo
August 7th, 2016 07:37 AM dalebru Outstanding, thanks to both you and gomi.
January 24th, 2014 07:51 PM jlwade123 Thank you for your comments and suggestions. I have updated the BloodHound MACD-Keltner strategy to include a 21 HMA sl
ope as suggested, and also to provide for a 5 min chart for the slope. I tested the indicator for January 2014 on a 233
tick chart, and this is a profitable strategy. I will post the updated strategy.
Thanks,
January 24th, 2014 04:09 PM rfiske Thanks > So glad we are getting some BloodHound development going!
Realyy helps me with the laerning curve
January 20th, 2014 02:18 PM sunny135 can you please let me know if it is available for NT7?
November 17th, 2013 09:42 PM Raj1 Can it be made available for Ninja-7?
November 17th, 2013 09:41 PM Raj1 Is it available for Ninja -7?
great indicator. Was wondering if you could could make a verssioin of the indicater so that a third party indicator like
markers plus can copy lines to make an semi auto entry. thank you Bill
August 5th, 2021 05:59 PM Pocketful Thank you Bob for demo in webinar. I use a fib trend indi and always liked the ADXVMA. Now I'll compare with the bands
.
September 18th, 2020 05:30 AM TexNinja THANKS!
May 5th, 2020 04:20 AM bcomas Thanks! Fantastic tool
September 12th, 2019 12:53 PM BoltTrader Thank you! Looks great