Description:
gbDWAP is the Delta Volume Weighted Average Price. I was interested in what it would look like if regular volume in VWAP was replaced with the 'absolute value' of the delta volume. Note, since delta volume can be either positive or negative, the absolute value is used rather than the signed value. The Typical price is used in the calculation for this indicator.
The attached chart shows VWAP (Yellow), DWAP-BidAsk (Cyan), and DWAP-UpDownTick (Pink) side-by-side so you can see how they appear relative to one another. At this point, this indicator is only an experiment born out of curiosity and I have not studied it much to determine what value it may have, if any. My initial thought is that it adds no additional value over VWAP.
Notes:
1) Make sure you enable Tick Replay for this indicator.
2) This indicator requires that you have the NT8 OrderFlowCumulativeDelta indicator. If you have the NinjaTrader Lifetime license you should have this.
Parameters:
* DeltaType: Base the DWAP on either BidAsk or UpDownTick
June 25th, 2021
Size: 2.49 KB
Downloaded: 612 times
2391
TraderGB
gbPriceReferenceATR, Ver 1.0, TraderGB, June 24, 2021
Description:
Shows current price in relation to ATR reference points. The anchor point where the ATR calculations are pinned to can be the Close, High, Low, Median, Open, Typical or Weighted price of the current bar or any bar in the past. ATR calculations are always made from the prior bar to the current bar. No matter what price and bar is selected, the upper/lower reference lines are calculated by adding/subtracting half the ATR factor (ATR * MultipleATR) from the given price/bar anchor point.
Parameters:
* LookbackATR: Length for the ATR calculation (default=10)
* MultipleATR: Multiple used for ATR calculation (default=1)
* AnchorPoint: Price to use to anchor ATR calculations to (default=Median)
* BarsBack: Bar to use for anchor ATR calculations to (default=0)
Description:
Highlights bars with above normal range and volume.
Notes:
1) This indicator is designed to be used on bars that vary in range and volume. Thus, it is not intended to be used with bars with constant range or volume (for example, range bars or volume bars).
2) WAV files are within included zip file. You'll have to manually copy and paste these files to your sound folder within NT8 (for example, C:\Program Files (x86)\NinjaTrader 8\sounds).
Parameters:
* AverageLookback: Lookback period to determine what is normal or typical.
* DevType: Deviation type: ATR or StdDev (default=StdDev)
* RangeMultiple: Threshold multiple above normal range (min=1, default=2)
* VolumeMultiple: Threshold multiple above normal volume (min=1, default=2)
MajorBar Plot Values:
0 = not a major bar
1 = major bar up
-1 = major bar down
Included sound files for alerts (place in NT sound folder):
MajorBarUp.wav
MajorBarDown.wav
June 24th, 2021
Size: 166.88 KB
Downloaded: 519 times
2389
TraderGB
I am an elite member & this is my first time trying this & for the life of me I can not find the 'appropriate' place to post a question concerning an NT7 indi being created for NT8.
The NT7 indi is listed after download as eWilliams LLMa or eWilliams JMA. I have the code & compared to so many others I have seen it appears fairly 'simple'. My reason for wanting it = SO much simplier to use than the 3 indies put together in NT8. Searched everywhere with no luck for a year and half & finally came here.
ANY help would be greatly appreciated & again I apologize if I am off base asking here.
Screenshots = NT7 with indi & shows how it loads...no idea author. & NT 8 version same time with 'busy' replacements.
well dead in the water already since I am not sure how to post a url of my screenshot...
I took jpg of the code & png of same time frame - 1 shot each of NT7 and NT8 of June 23, 2021.
Appears you have to download the NT7 shot & the NT 8 shows in post or vise versa.
Since I may ultimately be in the wrong place to even ask....will see if someone can help before I push anymore buttons.
THANK YOU ALL for your wonderful contributions.
Lavender
Option for a trailing stop using ATR times a Multiple
Entry rules at this point are very simple,
Enter Long: Close > Open
Enter Long: Close > previous High
Enter Long: fast MA > Slow MA
Enter Short: Close < Open
Enter Short: Close < previous Low
Enter Short: fast MA < Slow MA
Exit Rules:
Exit Long: fast MA < Slow MA
Exit Short: fast MA > Slow MA
06/16/2021 - if you are trying to test the system on non live data you will need to remove: if(State == State.Historical) return;
if(State == State.Historical) return;
This line of code stops the system from accessing historic trades.
This is an untested and barebones template. Use at your own risk. THERE MAY BE BUGS in the system and you are encouraged to adapt and change the model as you see fit. I ASSUME NO RESPONSIBILITY AND NO LIABILITY FOR ANY TRADES OR BAD FILLS. USE AT YOUR OWN RISK.
June 11th, 2021
Size: 4.63 KB
Downloaded: 220 times
2386
jpygbp
gbBuySellPressure, Ver 1.0, TraderGB, June 4, 2021
Make sure you have Tick Replay on when using this indicator.
Description: This is the stock NT8 BuySellPressure indicator with the following modifications (requested by cshrum):
1) Re-scaled between -100 and +100 (was between 0 and 100)
2) Buy pressure appears above zero and sell pressure appears below zero
3) Changed line sytle from line to bar
4) Added addtional reference lines (+50 to +100 and -50 to -100)
5) Added divergence marker on price panel (optional)
6) Added divergence marker on pressure panel (optional)
June 4th, 2021
Size: 3.25 KB
Downloaded: 473 times
2385
TraderGB
HorizontalTick, Ver 1.0, TraderGB, June 4, 2021
Description:
Drawing tool that draws a short horizontal line. I use this to mark off confirmed swing highs and lows, but you may find it useful for other purposes.
June 4th, 2021
Size: 3.89 KB
Downloaded: 289 times
2384
TraderGB
gbStochRSIv2, Ver 2.0, TraderGB, July 7, 2021
Description:
This is the Stochastic RSI oscillator by Chande and Kroll. Most implementations of this indicator use only a single length for both RSI and Stochastic calculations. This implementation allows separate input for each. In addition, an input is included for weighted smoothing of the results, which is actually double smooth. The results are adjusted to range between +100 and -100. A common calculation used by Ehlers to do signal lines is employed here.
References:
* The New Technical Trader, Tushar S. Chande and Stanley Kroll, 1994, p 124-133
Updates:
2021-05-30: Added opacity for plots.
2021-07-07: (Ver 2.0) Made updates on color/opacity/alerts per request.
December 29th, 2022 05:37 PM sigmatrader This can be useful with its normalization and divergence.
January 28th, 2022 02:48 PM mjones11 Excellent indicator!!
June 8th, 2021 10:55 AM bmaran Thanks for this indicator. I am testing this and I see the triangles for divergence on the top panel are printing only o
n refresh. Also I have noticed that short divergence are not printing always.
June 24th, 2021 12:24 AM hedgeplay Each comment I left includes a link for you so be sure to read all three comments. Be sure and Read all Three comments.
Here is the link to the AuLLMA.cs I mention in the first comment.
January 28th, 2022 02:23 AM muniz182 The best indicator ever... If you combine with GB volume reverse probably you will make good trades... Thanks GB!!!
September 9th, 2021 06:58 AM nothingbutprofits I experiment your indicator - and agreed with your assessment about the delta type (bidask/updowntick) - not much differ
ence from original VWAP. Thanks for your experiment..as I learned from it.