September 6th, 2010
Size: 11.00 KB
Downloaded: 610 times
633
papa15
Based on my needs, I have added couple new features to some of Gomi's indicators. The 2 new indicators are meant as add-ons (not replacements) to the original ones contained in the current GomPackage1.1.
GomDeltaVol_UpDown (based on GomDeltaVolume):
added option for "negative delta"plot below zero line; added "zero line" plot; disabled TotalVolume plot/calc.
This indicator will automatically label all plots in the price panel. The plot names are what are assigned by the creator of the indicator, there are no provisions to change the plots names.
You have the options of:
Font type and size.
Area width for labels
background area color
Number of ticks away from the current price (live) or historically the close of the historical bar
No labels.
NOTE: If you scroll the bars and are only looking at historical bars, the label background will change to dim gray to indicate you are not looking at live bars. If you have enabled Ticks away option then the letter "H" will precede the ticks value indicating that the ticks value is from the last closed bar shown. When you return to live bars, the label background will return to your selection and if viewing ticks, the "H will be removed.
September 25th, 2022
Size: 3.39 KB
Downloaded: 537 times
2582
Tasker_182
Here are all the market internals indicators I use that have been requested by Spoos thread visitors.
1) You must have ADE Library installed and set up- sorry cant help you there.
2) You must have a 1 minute chart of Vix and $Tick running with the ADE Save indicator applied.
3) On the chart you want to display VIX, Cumulative Tick and Ade Tick indicator- apply Ade Tick and Ade Vix and Ade _CTick (C_Tick looks good on top of ADE Vix (no scaling) and note that the indicator is delayed 5 minutes in the morning before starting to allow it to a ccumulate)
4) Tick Levels should be overlayed on a chart of $Tick to highlight Zero, 600 and 1000 =/- levels
Attached image shows :
Left top= $Tick with Tick Levels Indicator
Left Bottom= ADE Tick
Right Top= ADE Vix with C_Tick overlayed (C_Tick set to no scaling)
Right Bottom- ADE Tick
February 5th, 2016
Size: 243.10 KB
Downloaded: 732 times
1702
Inletcap
This indicator uses ADE and OOEL to plot Floor Pivots, Y_H/L/C and a label showing the average daily range. It requires some setup as described in the indicator itself. The screen shot looks poor- All lines, rectangles and labels have complete color, width, pattern and transparency control so you can dull them down or make them pop. Also have complete control of how many bars to the right your lines and labels display.
Updated to V2- Code is a little cleaned up and adds the ADR_H and ADR_L "marker" to the chart on the right side of the screen.
March 16th, 2016
Size: 941 bytes
Downloaded: 408 times
1721
bmtrading9
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.
IMPORTANT: Read before install. This is an Average DAILY range indicator, so you MUST have at least the number of days you are setting your ADR to compute an ADR. This includes weekends that don't have data. So if it does not work, MAKE sure you have enough days loaded. E.g., if you are trying to display a 14-day average, but only have 10 actual days of data(excluding weekends), the indicator will return a null value(∞).
------------------------------------------------------------
This indicator will display an ADR on your screen. It will also display projections of that ADR as the day progresses.
As the range is extended, the lines will adjust until the ADR is achieved... The lines will then LOCK in place, change color and remain FIXED for the rest of the session. The image attempts to show this.
The lines produced are projections, NOT predictions. The lines are simply the result of subtracting the ADR from the CURRENT daily High to plot the LOW projection, and the opposite to plot the HIGH projection. This is why the lines will adjust and shrink as the range expands.
Setting "AutoScaleLines" to true, will autoscale so that the lines are always in view on your chart. I.e., this will shrink the bars.
The on-Screen text should be self-explanatory, but the label of "complete" simply describes the current day's range as a percentage of the ADR. E.g., a value of 50% tells you the CURRENT day's range is 1/2 the ADR.
You can either on-screen display, lines or both.
The indicator will update in real-time, on each tic.
Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.
->UPDATE(26Nov2020): V2 of Indicator. Added new Parameter called Last-Bar SmartFit. This parameter will push the ADR(the lines) to the LOD(Low of Day) or HOD(High of Day), on the LAST bar in the session. This will occur when the ADR is NOT achieved on that day.
It works by putting the range on whichever came FIRST(LOD or HOD). THis is mostly visual, as I like to see visually, by how much the ADR was missed. Mostly just an easier way to see historical data. This adjustment will ONLY occur on the LAST bar of the session.
THIS image below attempts to explain what the new parameter is doing.
This indicator helps you define your entry, stop and target (1 or 3) visually on the chart with the help of horizontal lines, calculates your potential P/L ,unrealized P/L,Risk/Reward ratio and contracts sizing per account size.
- Defines your Risk/Reward ratio using 1 or 3 targets
- Save & reload your values,be it minute,daily or weekly chart (one set of values per instrument)
- Interactive Mode: per-tick P/L based on the chosen contracts size
- Interactive Mode-Attached: per tick potential P/L
- Non-Interactive : Contract sizing is based on the defined risk tolerance per account size
- Hide/show the indicator as required & show/hide on start-up
- Extended or short lines
Last updated on April 16 2014 "Major changes"
- Indicator's parameters text description on the top left of the plot reduced
- Potential P/L is calculated based on 1 contract in non-interactive mode
- Enter to targets potential P/L bug fixed
- Visual structure is changed for three-targets mode
- Line width is now adjustable
- Beam pointer added when short lines are used
- Forex price format corrected (6E,6J...)
- Short lines distance from last bar bug fixed
- 1 or 3 target lines
- Choose between Short& Extended lines
- Pixel distance is used now
- Colors are now configurable
- $ sign removed
- Show on start-up option added
- The code was rewritten from 0 almost
March 25th, 2014
Size: 12.02 KB
Downloaded: 1440 times
1538
bassam
Exported using NT 8.0.9.0
Description
This is a port of the NinjaTrader 7 AdvancedRiskReward.v3 indicator by bassam. The original indicator can be found here.
Quote:
This indicator helps you define your entry, stop and target (1 or 3) visually on the chart with the help of horizontal lines, calculates your potential P/L ,unrealized P/L,Risk/Reward ratio and contracts sizing per account size.
Once started click on the chart 3 times there where you think your values will be appropriate , then shift the lines as needed and save the changes.
- Defines your Risk/Reward ratio using 1 or 3 targets
- Save & reload your values,be it minute,daily or weekly chart (One set of values per instrument)
- Interactive Mode: per-tick P/L based on the chosen contracts size
- Interactive Mode-Attached: per tick potential P/L
- Non-Interactive : Contract sizing is based on the defined risk per account size
- Hide/show the indicator as required & show/hide on start-up
- Extended or short lines
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu Tools > Import > NinjaScript Add On.
January 18th, 2017 02:56 PM AABid Very good at predicting reversals, especially in conjunction with a the unirenko chart. Wouldn't (couldn't?) trade with
out it.
January 10th, 2017 02:41 PM nubby Thanks..interesting CCI
August 26th, 2014 06:32 PM bobc635 Thank You very much!
April 21st, 2014 09:45 PM mikhersh Thank you Sir!
April 29th, 2013 09:44 AM TradingVictor Thank you very much.
September 27th, 2018 09:37 PM PhxEagle Very good indicator...i also have been looking for this. However, is there a way to click on the chart and have it show
all the numbers etc as a hypothetical trade? It looks like the only way to have it appear and show is if you place an o
rder. I want to be able to just place a hypothetical trade on a chart and see it.
July 15th, 2017 01:51 PM delta9100
June 29th, 2016 12:34 PM bpr17 This indicator seems very interesting, but after trying different things I cannot find they way for his correct use. may
be it doesn't work for Intraday?
May I ask you to give some more indications about the configuration?
Thanks very much
September 4th, 2015 05:28 PM jossfx thanks friend, it's a great tool for risk management.
Is it possible to lower the risk of 1? for example 0.5% I can't do it
July 8th, 2021 11:17 PM Bato75 Hey is there any was you could make this same indicator but for the Average Weekly Range instead of ADR. Or instead make
one indicator that does all the same things except its the ADR AWR and AMR?
June 14th, 2021 11:01 AM Bato75 love it
June 14th, 2021 11:01 AM Bato75
March 10th, 2021 03:59 PM pmat great job ! thanks for sharing