Search
futures io


Categories Help    

Search Results
Searching for entries matching stop, looking in keywords for any words
Found 10 matching entries

Sort by

Entries
MaxStopFailsafe - Hidden Auto Stop 5 *
Guys I paid for this indicator to be developed.
It’s basically a hidden automatic “stop order”

I call it my failsafe loss limiter, as when trading using NT8 I have a bad habit of removing the visible stops on the chart at times to give a trade room to breathe and then every so often I end up getting run over by a sharp move and I wanted to prevent that from happening. Stop the bad habit so to speak. So i had this indicator developed which could run in the background.

Basically you attach it to your chart like any other indicator, set your amount of ticks stop loss in the settings and away you go. Then whenever you place a trade via NT8 chart trader and forget to use a stop, when your set level/amount of ticks against you is hit, you will be stopped out automatically.

Now, forewarning:
When I used the indicator it worked well but then there were a couple of issues:

1. At times, when say I had it set to 16 ticks stop loss and I wanted to change my mind and I changed the set level to say 12 ticks in the sttings, even though I changed it in the indicator settings, the original set level was filled, not the new level.

And,

2. When I remove the indicator from the chart, the auto stop would still function and I’d get filled even though I had removed It from the chart. It only removes from the chart when I removed the actual indicator from the ninjascriptor editor indicators list.

Both of the above shouldn’t happen.

I asked my programmer to look at this, but he couldn’t find anything wrong in the programming. So if any of you programmers on here would like to use the indicator and maybe give it a test and fix the above issues if you have them I think it would be helpful indicator for NT8 users.

I really liked using this indicator as it forces my own limits upon me and saves me from my own bad habits of moving / removing stops.

Although sometimes you do have to change the stop size due to changing market conditions/volatility.


Category NinjaTrader 8 Indicators and More 
 
Suggest other entries I might like
Details: MaxStopFailsafe - Hidden Auto Stop
Category: NinjaTrader 8 Indicators and More 


December 11th, 2018
Size: 2.46 KB
Downloaded: 202 times

Keywords: loss stop
MaxStopFailsafe - Hidden Auto Stop
Theres no screenshot as its a hidden indicator.

Guys I paid for this indicator to be developed.
It’s basically a hidden automatic “stop order”

I call it my failsafe loss limiter, as when trading using NT8 I have a bad habit of removing the visible stops on the chart at times to give a trade room to breathe and then every so often I end up getting run over by a sharp move and I wanted to prevent that from happening. Stop the bad habit so to speak. So i had this indicator developed which could run in the background.

Basically you attach it to your chart like any other indicator, set your amount of ticks stop loss in the settings and away you go. Then whenever you place a trade via NT8 chart trader and forget to use a stop, when your set level/amount of ticks against you is hit, you will be stopped out automatically.

Now, forewarning:
When I used the indicator it worked well but then there were a couple of issues:

1. At times, when say I had it set to 16 ticks stop loss and I wanted to change my mind and I changed the set level to say 12 ticks in the sttings, even though I changed it in the indicator settings, the original set level was filled, not the new level.

And,

2. When I remove the indicator from the chart, the auto stop would still function and I’d get filled even though I had removed It from the chart. It only removes from the chart when I removed the actual indicator from the ninjascriptor editor indicators list.

Both of the above shouldn’t happen.

I asked my programmer to look at this, but he couldn’t find anything wrong in the programming. So feel free to use it and if any of you programmers on here could maybe give it a test and fix the above issues if you have them I think it would be helpful indicator for NT8 users.

I really liked using this indicator as it forces my own limits upon me and saves me from my own bad habits of moving / removing stops.

Although sometimes you do have to change the stop size due to changing market conditions/volatility.


Category NinjaTrader 8 Indicators and More 
 
Suggest other entries I might like
Details: MaxStopFailsafe - Hidden Auto Stop
Category: NinjaTrader 8 Indicators and More 


December 11th, 2018
Size: 2.46 KB
Downloaded: 70 times

Keywords: loss stop
Scalpel Signal_v2 4 *
This indicator was designed to provide an entry signal, in either a trending configuration using an EMA filter, or via a countertrend formation (especially in range bound markets) using a higher sensitivity threshold.

There are 4 available parameters which guide output. The WARNING levels, and the SIGNAL thresholds.

Maximum values for WARNING or SIGNAL should not exceed (normally) + or minus 7.

Indicator works best with non-minute bars (tick, range, renko, volume).

When deployed with trend filters, consider using a lower WARNING and SIGNAL sensitivity range to define possible pullback entry areas. If no filter (EMA) is used, watch for punctures of the signal candle high/low for continuation movements.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: Scalpel Signal_v2
Category: NinjaTrader 7 Indicators 


August 27th, 2017
Size: 17.17 KB
Downloaded: 1013 times

Keywords: and scalping stop trend reverse
Chande Kroll Stop 5 *
Exported using NT Version 7.0.1000.30

This is an implementation of the volatiliy based stop that was suggested by Tushar Chande and Stanley Kroll in their book "The New Technical Trader". The indicator comes with a long stop line (blue) and and a short stop line (red).

Calculation of long stop: The preliminary long stop is calculated by deducting a multiple of a 10-period ATR from the highest high of the last 10 bars. The long stop is then calculated as the highest of the last 20 preliminary long stops.

Calculation of short stop: The preliminary short stops are calculated by adding a ,ultiple of a 10-period ATR to the lowest low of the last 10 bars. The short stop is then calculated as the lowest of the last 20 perliminary short stops.

Calculation of ATR: The ATR can be calculated in three different ways. "Arithmetic" uses a simple moving average over the last 10 true ranges. "Exponential" uses an exponential moving average over the last 10 true ranges, while "Wilder" simply calculates the default ATR(10) which is calculated as exponential moving averages with a smaller smoothing constant.

Default settings: Default settings follow suggestions by Chande & Kroll. Following suggestions in their book the default parameters are 10, 3 and 20. Also they used a simple moving average for smoothing the true ranges. The only change that was necessary was to adapt the indicator so that it can be used intra-bar. For this purpose, the calculation does not use the (unstable) true range of the current bar nor the high of the current bar, but relies on the values for the prior bar. Just for the purpose to compare the indicator with implementations for other charting packages, it is also possible to perform calculations from the current unstable bar. When used with "COBC = False" or with the strategy analyzer (backtesting), the default settings should be used.




It is recommended to use the


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: Chande Kroll Stop
Category: NinjaTrader 7 Indicators 


October 14th, 2015
Size: 13.73 KB
Downloaded: 745 times

Keywords: atr averagetruerange chande kroll stop trailing volatility
3 Bar Trailing Stop 5 *
Exported using NT Version 7.0.1000.22

This is a trailing stop calculated from the prior 3 bars. It is similar to the trailing stop developed by Larry Williams, but not identical. The indicator plots a channel with an upper and lower stopline. When price reaches out beyond the upper channel line, all short positions should be exited. When price breaks through the lower channel line, that is a signal for exiting long positions.

Formula: The upper channel line is calculated as the larger of the prior bar's high + 1 tick and the upper line of a 2-period Keltner Channel displaced by 2 bars. The lower channel is calculated as the smaller of the prior bar's low - 1 tick and the lower line of a 2-period Keltner Channel displaced by 2 bars. The Keltner Channel is built from the average true range instead of the simple range, which was used for the original Keltner Channel.

Parameters: The midband of the Keltner Channel can be calculated from the typical price (default setting), the close, the median or the weighted price. The multiplier used for calculating the channel width can be selected.

Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the signal bar closes outside the channel. The position may be reversed at the open of the next bar.

Reverse Intra-bar = true: This is a different setting. The signal will be generated with the first tick that has plotted outside the channel. In this case the position may be reversed intra-bar.

Accessing the trend: The indicator comes with a BoolSeries that holds the trend derived from the last channel breakout. The BoolSeries can be accessed by other indicators or automated strategies.

Channel shading: The area between the Keltner Channels can be shaded according to the current trend.

Paintbars: The trend can also be displayed via paint bars.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: 3 Bar Trailing Stop
Category: NinjaTrader 7 Indicators 


April 27th, 2014
Size: 5.46 KB
Downloaded: 1420 times

Keywords: keltner stop trailing trend
Chandelier Stop 5 *
Exported using NT Version 7.0.1000.12

This is a new implementation of the chandelier stop developed by Charles LeBeau. For a long trade the chandelier stop is calculated by subtracting a multiple of the average true range over the last N bars from the highest high (chandelier) since the inception of the trade. For a short trade the chandelier stop is calculated by adding a multiple of the average true range over the last N bars to the lowest low since the inception of the trade.

Instead of calculating the stop from the highest high and the lowest low, it is also possible to calculate it from the highest close and the lowest close.

The indicator version presented here uses the average true range calculated one bar ago. This is to avoid that the stop moves away when approached by a bar, it further acts against the distortion of the average true range when the indicator is set to COBC = false and reduces CPU load. The concept of using the ATR one bar ago was already introduced with the SuperTrend M11.

UseHighLow: The chandelier stops can be calculated from highest high/lowest low or from highest close/lowest close:

Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the close of the signal bar has taken out the stop line. The position may be reversed at the open of the next bar. The paint bars will only change colors for the bar after the signal bar. The arrow will be also plotted for the entry bar.

Reverse Intra-bar = true: This is an unusual setting for the Chandelier Stop The signal will be generated with the first tick that has plotted on the other side of the stop line. In this case the position may be reversed intra-bar for the signal bar. Paintbars and arrows will already plot for the signal bar.

Accessing the trend: The indicator comes with a BoolSeries that holds the trend. This BoolSeries can be accessed by other indicators or automated strategies.

Paintbars: The indicator has an option to display the current trend via paintbars. Downclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.

Arrows: The indicator has an option to display trend changes via an arrow.

Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: Chandelier Stop
Category: NinjaTrader 7 Indicators 


April 22nd, 2013
Size: 227.83 KB
Downloaded: 1454 times

Keywords: atr averagetruerange chandelier stop trailing
ATR Stop Strategy (EA) 5 *
This strategy automatically creates a stop based on the ATR (Average True Range) indicator. The input in the strategy allows you to select the ATR period and the (numatrs) number of ATRs the stop is placed from the open price.

Category FXCM Strategy Trader 
 
Suggest other entries I might like
Details: ATR Stop Strategy (EA)
Category: FXCM Strategy Trader 


December 17th, 2010
Size: 2.25 KB
Downloaded: 108 times

Keywords: atr stop
MomStop (momentum stop) V2 5 *
This is momentum stop indicator so it pick a reversal point based on price action. It uses nothing but price so I guess it is also a PA indicator.
template is here
https://futures.io/traders-hideout/3500-momentum-stop-indicator.html#post34305

4/15/2010

-add more reversals

- add option to filter out bad signals using bar range

- add trade entry buy/sell line so that you can track the entry point visually


Category NinjaTrader 6.5 Indicators 
 
Suggest other entries I might like
Details: MomStop (momentum stop) V2
Category: NinjaTrader 6.5 Indicators 


April 12th, 2010
Size: 2.69 KB
Downloaded: 1829 times

Keywords: cory momentum stop momstop
VolumeStopV3Bnew 5 *
This is the same as Cory's "VolumeStopv3" but it allows you to choose which of 4 types of price/volume patterns will be indicated on the chart. In Cory's original version the 3 types of volume expansion patterns are bundled into one.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NOT TESTED [feedback]


Category NinjaTrader 6.5 Indicators 
 
Suggest other entries I might like
Details: VolumeStopV3Bnew
Category: NinjaTrader 6.5 Indicators 


November 19th, 2009
Size: 3.53 KB
Downloaded: 775 times

Keywords: ninjatrader patterns rsi77 stop volume
Volume Stop v2 0 *
inspire by Better Emini stop volume indicator but I add many changes to eliminate or include some of reversals that the original miss.
here is version 2 with RJay help it also colors the vol bar.
note: it seems works better on 5m or RJay no gap range bar.

COMPATIBILITY:
NinjaTrader 6.5: YES
NinjaTrader 7.0: NOT TESTED [feedback]


Category NinjaTrader 6.5 Indicators 
 
Suggest other entries I might like
Details: Volume Stop v2
Category: NinjaTrader 6.5 Indicators 


September 6th, 2009
Size: 2.24 KB
Downloaded: 446 times

Keywords: cory ninjatrader stop volume
 


 
Category
 



Copyright © 2021 by futures io, s.a., Av Ricardo J. Alfaro, Century Tower, Panama, +507 833-9432, info@futures.io
All information is for educational use only and is not investment advice.
There is a substantial risk of loss in trading commodity futures, stocks, options and foreign exchange products. Past performance is not indicative of future results.