Just import into NT, and restart NT. You should then have a "BetterRenko" type available in the intervals in the data series window. The brick size is specified in number of ticks.
New twist on Renko to fix some of the quirks of Renko. All data is real data, so should be able to backtest with these bars. A new bar style is also available as a different download called BetterBrick, but it is not required as CandleSticks or OHLC can be used.
V2 changes alignment of first bar to be mod brickSize. In NT65, this is first bar, in NT7 it is first bar of each session.
See forum thread for more information.
NT 6.5: Yes - does not support new bar at session boundary, or new bar style
NT 7.0: Yes
Changelog:
(earlier changes can be found in post #1 in the thread)
April 16 2013: v5.8
Important Bug Fix: fixed rounding error that pretty much messed up everything, please ALL update to this version!
v5.9
Apparently v5.8 did not fix the issue, hence this update.
May 5 2013: v6.0
Fixed a bug that could result in large trace files.
June 10 2013: v6.1
Improved window position handling. Now has 5 modes:
Auto: Default location and size
Manual: location and size are set manually
DockRight: Docks to the right of the parent chart
DockLeft: Docks to the left of the parent chart
RememberPosition: this will remember position and size
Feb 07 2014: v6.2
Added option to show the Dominant Limit or Largest Limit in a print, setting for this is: Parameters-->#12
v6.3 Fixde a bug in the RememberPosition function.
February 7th, 2014
Size: 29.17 KB
Downloaded: 7922 times
1246
vvhg
Exported using NT Version 7.0.1000.11
This is a new implementation of the TradeStation SuperTrend indicator for NinjaTrader 7. The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties. The SuperTrend can be viewed as a trailing stop and changes direction, when the trailing stop is taken out.
The SuperTrend U11 calculates both the baseline and the offset 1 bar ago, as did the SuperTrend M11. This is to reduce CPU load and avoid feedback loops.
Accessing the trend: The indicator comes with a BoolSeries that holds the trend. This BoolSeries can be accessed by other indicators or automated strategies.
Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the close of the signal bar has taken out the stop line. The position may be reversed at the open of the next bar. The paint bars will only change colors for the bar after the signal bar. The arrow will be also plotted for the entry bar.
Reverse Intra-bar = true: This is an unusual setting for the SuperTrend. The signal will be generated with the first tick that has plotted on the other side of the stop line. In this case the position may be reversed intra-bar for the signal bar. Paintbars and arrows will already plot for the signal bar.
Paintbars: The indicator has an option to display the current trend via paintbars. Downclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.
Arrows: The indicator has an option to display trend changes via an arrow.
Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.
Comparing Supertrend U11 to Supertrend M11:
The SuperTrend U11 is a generalization of the SuperTrend M11.
-> The SuperTrend M11 uses the moving median of the arithmetic mean (High + Low)/2 one bar ago and adds/subtracts a multiple of the average true range one bar ago.
-> The SuperTrend U11 allows you to use the median as above , but instead you can also calculate the baseline from a selection of other indicators. These are the options available for the baseline
- a moving median
- a moving mode
- an ADXVMA
- a 2-pole Butterworth filter
- a 3-pole Butterworth filter
- a DEMA (double exponential MA)
- a DSMA (double simple MA)
- a DTMA (double triangular MA)
- a DWMA (double weighted MA)
- an Ehlers filter
- an EMA
- a 2-pole Gauss filter
- a 3-pole Gauss filter
- a 4-pole Gauss filter
- a HMA (Hull MA)
- a Holt EMA
- a Linear Regression indicator
- a LLMA (phase set to 0)
- a SMA
- a 2-pole Supersmoother
- a 3-pole Supersmoother
- a TEMA (triple exponential MA)
- a TMA (triangular MA)
- a TSMA (triple simple MA)
- a TWMA (triple weighted MA)
- a VWMA(volume weighted MA)
- a WMA (weighted MA)
- a ZeroLagHATEMA
- a ZeroLagTEMA
- a ZLEMA
While the SuperTrend M11 uses the average true range as an offset, the offset for the SuperTrend U11, can be selected as
- a moving average (or median, mode) of the simple range
- a moving average (or median, mode) of the true range
- the standard deviation
The added options will not slow down the indicator, as the selection becomes effective, when the indicator is added.
You can reproduce the SuperTrend M11 with the SuperTrend U11, if you apply it to the arithmetic mean (Median in NinjaSpeak) and select "Median" for the baseline, "EMA" for offset smoothing and "True Range" for offset type. However you need to take into account that the ATR uses Wilder's exponential smoothing (smoothing constant k = 1/n) which is different from the EMA (smoothing constant k = 2/(n+1)). For example an offset period of 8 for the SuperTrend M11 will produce a smoothing factor of 1/8 and translate to an offset period of 15 for the SuperTrend U11.
Update July 3, 2012: ADXVMA option for baseline added.
Update July 5, 2012: Bug removed - Butterworth, Gauss and Supersmoother Fillter did not use the specified baseline period.
Update August 17, 2012: Old version of ADXVMA replaced with new version.
Update August 31, 2012: Ehlers filter updated.
Update October 2, 2012: Indicator simplified. Trend state can no longer change intra-bar. Gaussian and Ehlers filters updated. Mode removed from options.
Update October 3, 2012: Indicator now allows for displacement. BoolSeries modified for accessing the trend. Trend change intra-bar is possible with option reverse intra-bar and COBC = false.
Update March 5, 2013: Arrows now plotting one bar earlier for the option Reverse intra-bar = true.
For the last three updates you also need to update Bollinger Universal & Keltner Universal, if you have them installed. Please remove old versions of those indicators first.
Imp: Extract VolumeLadderMetroEditionV2.cs file from Zip file Indicator.zip and place in
C:\Users\<userName>\Documents\NinjaTrader 7\bin\Custom\Indicator. Then Open any indicator for editing in NT7 and compile the indicator. This Process make , VolumeLadderMetroEditionV2 , to appear in indicator list on applying to chart. Without this process indicator will not be visible for apply.
prerequisite: Install latest or GomBase and Delta Package 2.6 before above step, if you are using first time Gom based indicator. For More detail on GomBase and Delta Package foloow the post
1) Provision to show minus sign for delta data in CustomLadder if base is chosen as volume.
2) Prior High Volume Tick Price is can also be highlighted by rectangle around cell.
Update 11-Sep-2013
----------------------------
1) Mainly updated side ladders with numerous customization methods.
2) Removed Filtered Volume Tick bug on Bottom Graphics and corrected the side ladders filling volume.
March 17th, 2019 10:53 PM Aragorn Excellent for possibly helping us who never learned how to read the tape. Awesome. Thank-you
November 7th, 2018 07:03 AM romus Excellent!
December 2nd, 2016 09:10 AM gentech Many, many thanks for this work. Will there be a version for the NT8 platform? (I wish I had the skills of some of the c
ontributors here; I'd love to do some conversions myself and post for others to use.) Once again, thank you for sharing
your hard work with us.
February 25th, 2016 04:49 PM elyt Thanks, this is so useful. All the best
December 25th, 2015 09:24 AM lesterb Excellent, thank you !