This indicator calculates multiple Laguerre RSIs across two time frames in addition to your chart timeframe, and then plots them horizontally as a visual pullback indicator. It does not plot like a normal Laguerre RSI!
The idea is that your chart would be the "medium" time frame, and you would then select a lower and higher timeframe to compliment your chart.
The indicator allows you to set the Gamma, Upper and Lower threshold for each Laguerre RSI
The indicator allows you to select from any of Ninjatrader's built-in time settings
A long entry would look like this:
- Higher timeframe (lower bar) is showing long (preferably green)
- Chart timeframe (middle bar) has retraced and is showing orange or red
- Lower timeframe (thinner, topmost bar) is crossing back to yellow or green
The default colors are setup like so:
Red - Below the 20 line of the Laguerre RSI (or can be set to your own value)
Orange - Between the lower line and 50
Yellow - Between 50 and the upper line
Green - Above the 50 line
At this time the indicator does not plot a signal, but it most likely will in the near future.
NEW:
3 new signal plots have been added for use with Strategy building. Line1, Line2, and Line3 will return values of 1-4 depending on how they are plotting. All signaling "buy" would be a 4,4,4 combination, and "sell" would be "1,1,1". A pullback for a long entry might look something like "1,3,4", depending on the way you have your lines arranged.
Changelog
1.00 - Initial release
1.10 - Updated first line width
Added ability to change position of the line representing the chart time frame
Added new plots for tracking signals
September 5th, 2021
Size: 5.24 KB
Downloaded: 39 times
2425
torch2k
Zombie Pack 9 includes Zombie AccountInfo, Zombie BarTimer, Zombie BBMACD, Zombie Candles, Zombie Candles Plain, Zombie EMA, Zombie EMA Cloud, Zombie Levels, Zombie NetPriceChange, Zombie PowerBox, Zombie PowerLine, Zombie PriceInfo, Zombie TradeMarkers, Zombie Trail, and Zombie ZigZag indicators. Zombie ZigZag & Zombie Trade Markers had significant contributions from other authors.
- Zombie AccountInfo shows the unrealized PnL, total PnL, and active orders/positions
- Zombie BarTimer shows the remaining time on the current bar before it closes.
- Zombie BBMACD helps identify the medium term trend
- Zombie Candles helps identify the medium term trend
- Zombie Candles Plain provide classic candle colors with the ability to change to candle outline and body colors (optional)
- Zombie EMA identifies the medium term trend
- Zombie EMA Cloud helps identify the medium term trend
- Zombie Levels includes horizontal lines for 100 levels and previous close
- Zombie Net Price Change shows the percentage difference from previous session close price
- Zombie PowerBox identifies the price range and can draw attention early to a structure change
- Zombie PowerLine identifies the medium term trend and pullback location
- Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie Setup Tracker helps identify the amount of energy in the market and in which direction
- Zombie Trade Markers to help with trade review
- Zombie Trail helps to identify new micro trends (includes setup alerts, sound file, and candle colors)
- Zombie Wave 1/2 helps to identify short and long term trends
- Zombie ZigZag helps identify swing highs & lows
October 12th, 2023
Size: 190.63 KB
Downloaded: 34 times
2489
icedfrosty
**New Version Sept 18/9 V1006**
Auto 3 Swing Indicator with toolbar and comprehensive support/resistance identification
**NOTE** The version has been updated. The previous version must be uninstalled before importing.
1.Open Ninjatrader 8
2.Click on TOOLS > REMOVE NINJASCRIPT ASSEMBLY
3.Select ActiveGeoking from the list and process removal
3.Import new ZIP file attached to this listing via TOOLS > IMPORT > NINJASCRIPT ADDON
Hope there are some traders out there that can benefit from this! I spent years perfecting this indicator while I was trading professionally and I am excited to share it with the community.
ActiveGeoking for NT8 leverages its own custom layer built on top of the zig zag indicator to automatically identify the three most relevant swings of any chart. A feature-rich toolbar allows the user to quickly shift the identified swings to their preference.
The identified swings are used to generate a wide array of technical price points based on Fibonacci retracements and extensions, as well as pivot highs and lows, trendlines and corrective/impulsive measured moves from Elliot wave theory. These price points can be considered areas of higher significance for the trader to consider potential future support and resistance to occur.
For anyone out there that is familiar with Bryce Gilmore's book "Trading to Win", this indicator will be recognised as highly aligned with his method of trading. The indicator utilizes an XABCD marking system, also common in other methods of TA.
Inbuilt algorithms detect when price points are invalidated by market movement so as not to display irrelevant price levels wherever possible.
Reporting of price points and swing measurements are all displayed on the screen and can be toggled on and off using the toolbar for all swing degrees and price level types.
The indicator options provide an exhaustive list of configuration options for tolerances and customized ratios for the user's preference.
**IMPORTANT** Ensure enough bars are loaded onto the chart as this indicator requires a decent amount of history for large degree swings
- 15 years for day charts
- 300 days for 60min
- 30 days for 5 min
Check out this thread below for guidelines on the indicators features which I will deliver in bite sizes pieces over time. Feel free to drop in and ask questions or provide feedback
NexusFi > Trading Community > Platforms and Indicators > NinjaTrader > Active GeoKing - Triple Auto Swing Indicator for NT8
Hope you are all doing great. I'm putting together this thread so I can share some of the features and functionality of ActiveGeoKing, an indicator that I spent many years developing and improving to support my own trading. The indicator …
August 23rd, 2023
Size: 59.95 KB
Downloaded: 34 times
2671
Marty087
Introduction: This is not an indicator. It's a utility to seek the trades executed by a strategy. For example, If you have one strategy with 100 trades executed over a chart, It's very complicated to go one per one to examine these trades. With this utility, this task, it's effortless.
How to use: Load de strategy in the chart, move the screen with the mouse for stopping the screen advance, and click the "Next" and "Prev" buttons to move across the trades of the strategy. IMPORTANT: Only use the first strategy loaded. The other strategies in the same chart are ignored.
Challenges:
It would be desirable that the screen advance is stopped when you click "Next" or "Prev".
Be able to choose between several strategies.
If you want to ask questions or suggestions about this indicator, you can do it in this thread:
I open this thread so that the forum members can ask questions or suggestions about this indicator.
Change Log:
// 06/11/2023 v1.0.1 - First version
// 10/11/2023 v1.0.2 - Fixed problem: When the market is closed, the buttons don't work. Has been included a ForceRefresh()
// 22/01/2024 v1.0.3 - Choose between winning trades, losing trades or both.
January 26th, 2024 11:09 AM TraderNinja63 Is there a demo video or pics of how you can use this indicator, please post them - Thanks
Not rating because i tried, but does not let me just comment
January 26th, 2024 08:45 AM MWACommodity Thank you very much for this generous offer to use the "Zombie Package". This is a really great collection of indicators
.
January 25th, 2024 09:06 AM cgvfort Hi and thanks for such amazing work! @icedfrosty
Did someone notice that PowerLine candle colors is not remaining after bar closes? I can see Zombie colors while bar is
forming but once is closed it changes to the color selected in Data Series.
January 4th, 2024 03:40 AM Pandanus
December 24th, 2023 09:54 AM Jim G This is the very best collection of indicators. Thank you for all your work and for sharing this with all of us