NinjaTrader 8 Indicators and More

Categories

Show

Help

NinjaTrader 8 Indicators and More

Indicators and Files in this section are compatible with NinjaTrader 8

Filter

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Filter

Page 19 of 40

« First

Last »

Entries

BuySellNetVolume Version 2 for NT8

Version 2.0 April 12, 2019

Exported with NT Version 8.0.17.2

Indicator Name: fpgBuySellNetVolume_V2 Folder: Cheech

This version functionally replaces the previous version(s) described and available here but does not replace it when this version is installed. The previous version can be removed manually when and if desired.

Enhancements/Changes in Version 2

1. User can select from several MA types for the Moving Average plots, some of which are from Lizard Indicators made available by the GNU license. Credits to Lizard Indicators for both their indicators and the MA selection code.

2. When MA smoothing is selected the type can be an SMA, EMA, or the selected MA type. The smoothing period for each MA (fast, mid, and slow) can be set individually. A MA period of 0 eliminates the smoothing for that MA. Note: The Mid MA can be used as an intermediate period by specifying a value between the fast and slow periods. When the mid MA is requested with zero value for the period (default) will result in the mid period being calculated. If a period is specified and it is not between the fast and the slow the midpoint is calculated and used. No warning message is displayed.

3. The ability to apply volume filters (1-4) against the Net volume thereby limiting the Net volume histogram display a net bar only for the volume specified in the filter(s).

4. More control over how plots are displayed.

5. The divergence marker has been moved from the Total histogram to the Net histogram. This was done because the Total histogram can be turned off. The Net and/or Net filters must be active for the divergence marker to be displayed. If the Filter option is chosen without the Net plots being display the marker will only be display when there is a divergence on a filter value.|

6. The plot for the in-progress bar has its own color and can be user set. This plot is always displayed regardless of the display option selected.

7. This is not a change but a clarification as it also existed in the previous version. The position of the total line (above the line if a buy total and below the line if a sell total) is not based upon the last Close price but on the value (positive or negative) of the Net volume.

Similar to the previous version at times setting the Indicators region Type property to Logarithm is easier to read. The 2 instances of the indicator in the screen shot have the same operation modes set but the bottom one shows some of the ability to control what is displayed. without needing to independently setting each to transparent. If a particular display is turned off the values are still calculated and can be viewed in the Data Box.

Change Log

Date Description
April 12, 2019........Initial release

Details: BuySellNetVolume Version 2 for NT8

April 12th, 2019
Size: 33.35 KB
Downloaded: 801 times

Keywords: buysellnetvolume tickreplay

irInsideBarsAll for NT-8.0.17.2 64-bit

As the name implies, this NT-8 indicator looks for Inside Bars and then simply paints an all white bar on your candle stick or OHLC bar chart, (it works on Hollow Candlestick charts also).

If the bar is an Inside Bar and is also a Doji (Open[0] == Close[0]) the indicator will paint a diamond on the close of the bar to highlight the Doji for you.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candlestick outlines and the candle bodies, one color regardless of the direction they close in (up or down). The indicator is set to calculate on bar close. (no need for it to be anything else)

Inside Bar condition: if(High[0] < High[1] && Low[0] > Low[1])
"Doji" condition: if(Open[0] == Close[0])

As I said, it's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".

Details: irInsideBarsAll for NT-8.0.17.2 64-bit

April 6th, 2019
Size: 2.33 KB
Downloaded: 880 times

Keywords: bars candlestick inside patterns

TickRefresh

This indicator allows chart updates on each tick or price change with a user defined refresh time interval.

Settings:
Refresh Time Interval in Milliseconds = Number of milliseconds between chart refreshes.
Under "Set up > Calculate" choose between updates on each tick or each price price change.

Example values for Refresh Time Interval in Milliseconds:
0 = update on every tick or price change.
1 = maximum of 1000 updates per second.
10 = maximum of 100 updates per second.
20 = maximum of 50 updates per second.
100 = maximum of 10 updates per second.
The sane default is 10 milliseconds. But you can set it to 0 without issues.

See a demos here:

Releases:
Version 1 March 25 2019: Initial release
Version 2 March 26 2019: Removed the TimerEventProcessor for better performance.
Version 3 March 28 2019: Optimized to prevent lag in fast markets if computer cannot keep up.
Version 4 April 4 2019: Improvements to latency and frame rate.

Details: TickRefresh

March 25th, 2019
Size: 1.74 KB
Downloaded: 468 times

irReversalBarsV3

Updated previous version to correctly paint on top of other Paint Bar type indicators. March 26, 2019
Download link includes irReversalBarsV3
(for some reason the download link still refers to the previous "V2" version's name??)

This NT-8 indicator simply paints a Bullish Reversal bar or a Bearish Reversal bar on your candle stick or OHLC bar chart, it works on Hollow Candlestick charts also.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candle bodies solid regardless of the direction they close in (up or down).
The indicator is set to calculate on bar close. (no need for it to be anything else)

Bullish Reversal condition: if((High[0] > Open[0] && Low[0] < Low[1]) && Close[0] > Open [0])
Bearish Reversal condition: if((High[0] > High[1] && Low[0] < Open[0]) && Close[0] < Open [0])

It's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".

Enjoy,
Trade well.

Details: irReversalBarsV3

March 21st, 2019
Size: 3.02 KB
Downloaded: 963 times

Trades Navigator (Strategy Analyzer Chart)

Lets you navigate trade by trade in Chart mode after back-testing in Strategy Analyzer.

How to use it:

1. Run your backtesting in Strategy Analyzer
2. When backtesting is done, select Chart mode
3. Attach indicator

Details: Trades Navigator (Strategy Analyzer Chart)

March 18th, 2019
Size: 160.40 KB
Downloaded: 368 times

EquitiesV2

This version is identical in terms of functionality to version 1(which is located here: https://nexusfi.com/local_links.php?action=ratelink&catid=27&linkid=1994).

I added the code (finally) to pull the expiry date from the chart and automatically add it to the indicator, so it no longer needs the user to manually input the date.

This indicator is for equities traders, to compare current performance with the 'other 3' equities and an average of all 4.

It adds data series for ES, NQ, RTY and YM, shows % change for each since the session open (24 hr session, not just the day session) as well as a simple moving average of all 4. The SMA period is user-configurable. Default is 10.

Hope you version 1 users find and download this one.

****
In reply to the comment about getting it to work in a strategy, I have never tried and am not a programming guru, but it seems likely that the 4 equity data series have to be loaded in the initializing sections of the strategy, which is before you call the indicator. The indicator can't load the data series for the strategy because it gets called after the strategy is initialized.
That'd be my guess. That you have to load the 4 data series in the strategy itself for the indicator to access them when it's called.
Good luck!
****

Details: EquitiesV2

March 9th, 2019
Size: 5.36 KB
Downloaded: 379 times

BuySellNetVolume-NT8_V1_21 (fpgBuySellNetVolume)

Notice: This indicator has been deprecated and will no longer supported as it has been replaced by Version 2 posted here

Updated Version 1.21 March 12, 2019

Exported with NT Version 8.0.17.2

Version 1.21 Corrections are described in Change Log

Previous Version 1.1 March 5, 2019
Exported with NT Version 8.0.17.1 (note this has been changed)

Notice(posted on 2/10/2019 at 1:45 PM MST)

It appears that something has changed in the latest NT update (8.0.17.1) that effected this indicator. The version here has been recompiled and re-exported using the latest release. No code changes were made. The version date (2/10/2019) and number (1.01) in the indicator parameters section reflect this change. If you have updated to the latest NT version and are having a problem or getting error messages either recompile the indicator or download and install the latest version.

I apologize for any confusion.

Summary

This indicator is an enhanced version of the NT8 BuySellVolume indicator. The enhancements are as follows:

1. Buys and Sells are show above and below the zero line,
2. The Net Volume (Buys-Sells) is plotted accordingly,
3. Total volume is displayed using a separate color and is shown accordingly,
4. A divergence marker (Bar close is opposite the Net Volume) can be indicated (not enabled by default),
5. Tick Replay (TR) is supported and defaults to display a different color for the TR Net Volume bars,
6. The width of the Buy/Sell, total, and Net histogram bars can be set individually, and
7. Option to reverse the Histogram Buy/Sell and Net widths so that the Net bar displays on the inside of the Buys/Sell bar.

Notes:

At times the Net volume is so small it can not be seen with the indicator region parameter set in Linear Mode. This can be rectified by setting it to Log mode as shown in the screenshot.
When changing the histogram bar sizes use odd numbers as the bars are painted from the midpoints.
For a divergence to be detected in addition to the Net number and bar direction being opposite it must pass a percentage check. If too many (too few) divergences are detected the percentage can be changed to reduce (increase) the number detected.
When using the Tick Replay with a large number of historical days (Days to Load) there may be a delay in the time it takes to initialize.
The indicator is installed in a folder named �Cheech�.

Version 1.1 Enhancements

Fast and Slow EMA of Net Buy and Sells with optional midrange which when set the period is the midpoint of the Fast/Slow period settings.
User defined volume offset from Zero line will create a Zero Zone with optional region painting.
Reorganized Indicator Parameters.

Version 1.1 Notes:

If EMAs are too close together set the indicator panel properties Type Parameter to Logarithmic
NT will display the upper and lower boundary lines (the zero zone) under the following conditions; 1. tick replay is enabled, 2. real time data is available (data feed is connected and market is opened), or, 3. the Zero Zone region painting is enabled. When any of the aforementioned are satisfied the lines will appear.

Version 1.21 Notes:
1. The labels of the MA plots were mis-labled as SMAs when they are actually EMAs.

Please PM me with either problems or questions instead of using the comments/rating section.

Change Log

Date_______Description
2/2/2019..........Initial release
2/10/2019........Recompiled and exported using NT 8.0.17.1
3/05/2019........Additional Enhancements described above
3/12/2019........Correct minor error in MA calculations, some code optimization, and Typos in Labels
4/13/2019........Deprecated, replaced by version 2

Details: BuySellNetVolume-NT8_V1_21 (fpgBuySellNetVolume)

February 4th, 2019
Size: 7.94 KB
Downloaded: 756 times

Keywords: buysellnetvolume tickreplay

_dnTrendChannel

Version 1.00 January 28 2019

This is a fib channel tool I designed to help measure patterns I encountered.

More info and a template can be found at this thread
https://nexusfi.com/elite-circle/46104-market-geometry-exploratory.html

Enjoy

Details: _dnTrendChannel

January 28th, 2019
Size: 20.11 KB
Downloaded: 746 times

Hourly Pivots (amaPivotsHourly)

Version 1.0 January 14, 2019

The Hourly Pivots indicator applies the calculation used for daily floor pivots to intraday time frames. The indicator displays pivots for any selectable period of N minutes. All pivots are calculated from the high, low and close of the prior N-minute period. The pivots can be displayed as floor pivots, wide pivots or Fibonacci pivots. The indicator further plots the pivot range, which is a value area derived from the prior N-minute period.

The default setting of the indicator is 60 minutes. With default settings the indicator will display hourly pivots including the Main Pivot PP, Central Pivot CP, Directional Pivot DP, Pivot Range, R1, R2, R3, R4 S1, S2, S3 and S4. The first period always starts with the daily session break. Depending on the period selected, the last period of the session may terminate before completion. It will not carry over to the first period of the next session.

Pivot range: The pivot range is the range between CP and DP. It is a symmetrical range around the main pivot PP.

Prior high, low and close: The indicator also displays the high, low and close for the prior N-minute period. These levels often act as support or resistance for the consecutive N-minute period.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Details: Hourly Pivots (amaPivotsHourly)

January 22nd, 2019
Size: 8.29 KB
Downloaded: 1464 times

Keywords: fibonacci floorpivots high hourly low pivots resistance support

ScrollsRite for NinjaTrader 8

This script installs as an indicator and allows users to drag their charts in any direction with a mouse. It is a feature of eSignal charting which I used for many years and simply could not live without when I moved to NinjaTrader. It is basically a rewrite of the NT7 version with the same name on this site and has been around for some time.

In truth NT8 provides this functionality already ( by holding down the Ctrl key ) but this indicator makes it that much easier by enabling it all the time.

I don't have much screen time last few years and I don't check in here that often but I will try and monitor for awhile to see that it works as expected. Leave comments in the original thread provided below.

Some Notes:

- If a chart has the Price Scale located on the Left side instead of the Right side of the chart as is normal, then you must configure ScrollsRite Scale Justification to the Left side also.

- To disable it temporarily simply uncheck the "Visible" checkbox in the ScrollsRite properties screen.

- If the Market suddenly shoots off the screen then hit the "F" icon at the top of the Price Scale to bring it back quickly.

Link to original thread:

Scrolls_Lite ( Vertical Drag/AutoScroll)
https://nexusfi.com/ninjatrader/24723-scrolls_lite-vertical-drag-autoscroll.html

Details: ScrollsRite for NinjaTrader 8

January 21st, 2019
Size: 2.36 KB
Downloaded: 533 times

Page 19 of 40

« First

Last »