NinjaTrader 8 Indicators and More
futures io futures trading


Categories Help    

NinjaTrader 8 Indicators and More
Indicators and Files in this section are compatible with NinjaTrader 8


Sort by
Filter

Show full/short entries Entries
Account Equity Guard NT8 strategy
Coded by bcomas October 2020. Email me for improvements or suggestions

Equity guardian. When the account drops or reach the targets the strategy close all the positions and disable ALL the strategies working.
Connection lost email advise feature. (NT Mail service should be setted ; Options - Share services...)
 
Suggest other entries I might like
Details: Account Equity Guard NT8 strategy


November 29th, 2020
Size: 2.89 KB
Downloaded: 1 times
Market Replay CL 12-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 12-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-20 (NT8)


November 26th, 2020
Size: 239.94 MB
Downloaded: 2 times
Nested Fractals 5 *
Fractals are a common bar pattern, created in a consecutive 3-bar series, where the bar in the middle is higher than the two on either side. This creates a fractal high.

In this indicator, that is created by what I have labeled as "Level 1." (see properties section in image).

This indicator also creates FRACTALS OF FRACTALS. So that means, if a Level 1 fractal exists, and has a LOWER Level 1 fractal on both sides of it, it creates a Level 2 fractal high.

This is done up to Level 5, and creates a series of swing points.

The indicator can display dots or numbers.

The parameter labeled "show triggers" shows an arrow with the corresponding color, WHERE on the chart the most recent fractal swing was actually confirmed. I.e., a Level 1 fractal high is confirmed at the END of the third bar.

The marker offset simply raises the marker text higher or lower above the bar.

I dunno what use this has, but is one of the experiments I have laying around, so thought I'd post it?

NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.
 
Suggest other entries I might like
Details: Nested Fractals


November 24th, 2020
Size: 4.60 KB
Downloaded: 48 times

Keywords: fractal fractals swing zag zig
ADR with Projection Lines V2 5 *
This indicator will display an ADR on your screen. It will also display projections of that ADR as the day progresses.

As the range is extended, the lines will adjust until the ADR is achieved... The lines will then LOCK in place, change color and remain FIXED for the rest of the session. The image attempts to show this.

The lines produced are projections, NOT predictions. The lines are simply the result of subtracting the ADR from the CURRENT daily High to plot the LOW projection, and the opposite to plot the HIGH projection. This is why the lines will adjust and shrink as the range expands.

Setting "AutoScaleLines" to true, will autoscale so that the lines are always in view on your chart. I.e., this will shrink the bars.

The on-Screen text should be self-explanatory, but the label of "complete" simply describes the current day's range as a percentage of the ADR. E.g., a value of 50% tells you the CURRENT day's range is 1/2 the ADR.

You can either on-screen display, lines or both.

The indicator will update in real-time, on each tic.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.

->UPDATE(26Nov2020): V2 of Indicator. Added new Parameter called Last-Bar SmartFit. This parameter will push the ADR(the lines) to the LOD(Low of Day) or HOD(High of Day), on the LAST bar in the session. This will occur when the ADR is NOT achieved on that day.

It works by putting the range on whichever came FIRST(LOD or HOD). THis is mostly visual, as I like to see visually, by how much the ADR was missed. Mostly just an easier way to see historical data. This adjustment will ONLY occur on the LAST bar of the session.

THIS image below attempts to explain what the new parameter is doing.
 
Suggest other entries I might like
Details: ADR with Projection Lines V2


November 21st, 2020
Size: 5.08 KB
Downloaded: 73 times

Keywords: adr average daily range session
Session Open Horizontal Offset Zones
Simple indicator that will plot up to 3, opaque boxes/zones, a fixed n-TICS above/below what your session's Open price is.

This indicator updates on-each-tic/real time by default(can change to onbarClose if not needed).

You can toggle and modify the horizontal session break line.

Setting "AutoScaleBoxes" to true, will autoscale so that the ENTIRE box is in view on your chart. I.e., this will shrink the bars.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.
 
Suggest other entries I might like
Details: Session Open Horizontal Offset Zones


November 12th, 2020
Size: 3.20 KB
Downloaded: 52 times

Keywords: boxes open session sessions zones
Market Replay CL 11-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 11-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 11-20 (NT8)


October 24th, 2020
Size: 179.24 MB
Downloaded: 11 times
Vertical Time Lines Version 1.01 5 *
These allow the selection and drawing of 'vertical' lines that are programmable for size, type, color and time.

I use these to mark the critical times during the Open, IB and Close. Also can be used in conjunction with a Horizontal Lines add-on to easily see time periods in a Box type of presentation on both axes of the chart. The code was created by ABC Trading Group as:

JMVerticalLinesNT8,
Version 1.01
 
Suggest other entries I might like
Details: Vertical Time Lines Version 1.01


October 19th, 2020
Size: 3.08 KB
Downloaded: 73 times
Intra-Session boxes v2 5 *
Simple indicator that will plot up to 3, opaque boxes, n-hours beyond what your session start is. Useful for users that like to delineate a day into various sessions for observation.

The input for the hours is a decimal, so you can tailor it to your needs. This indicator updates on-each-tic/real time, and will show the upcoming boxes for the current session, even if it is not active yet.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.

-UPDATE(17Oct2020): Fixed description in 'properties' section for "start/end" times. This was just a visual bug, and does not impact functionality of indicator. Thanks to Romus for finding this bug.
 
Suggest other entries I might like
Details: Intra-Session boxes v2


September 23rd, 2020
Size: 3.52 KB
Downloaded: 149 times

Keywords: session sessions
louiswelt
Many thanks to JonnyBoy who has converted the range bar marker "jtRangeMarker_N7" to NT8.

For range bars only. This indicator plots the maximum high or minimum low of a forming Range Bar. The plots disappear as soon as a new bar forms or the current bar has filled its required range. Draws a box around the current candle that indicates how much further a bar would have to move before the range is exhausted and new bar begins to paint.
 
Suggest other entries I might like
Details: louiswelt


September 22nd, 2020
Size: 3.63 KB
Downloaded: 85 times

Keywords: counter jtrangemaker range rangemaker
Market Replay CL 10-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 10-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 10-20 (NT8)


September 21st, 2020
Size: 172.08 MB
Downloaded: 21 times
Market Replay ES 09-20 (NT8) 4 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 4 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 4 of 4


September 15th, 2020
Size: 151.43 MB
Downloaded: 65 times
Market Replay ES 09-20 (NT8) 3 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 3 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 3 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 68 times
Market Replay ES 09-20 (NT8) 2 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 2 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 2 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 70 times
Market Replay ES 09-20 (NT8) 1 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 1 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 1 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 72 times
Stochastic Price Action and Cum Delta 5 *
Hello Traders, starting with the GEM Stoch, I added a Stoch of the Order Flow Cum Delta. You can select if you want UDT or BA. By loading two instances of this indie you can show both Stoch of BA and UDT. In addition, you can add weight to the PA or the CUM Delta. I like watching the regular Stoch, overlayed with BA and with UDT. In this way, I can see when there is absorption going on. In this pic are instances of the standard GEM Stoch , an instance of StochPACD with UDT weighed 4:1 and an instance of StochPACD with BA weighed 4:1.

R1: An astute trader found that the indie was not selectable on the chart. I have resolved that.

If you downloaded the original version, it went into the "gem" directory. You will need to use your Windows File Manager and delete that prior to installing this one... Sorry!!!

Also, in this ZIP is a 'lite' version that only calculates what is shown on the screen. If you want to scroll back, hit f5 to refresh the screen.

Trade Well
Bob
 
Suggest other entries I might like
Details: Stochastic Price Action and Cum Delta


September 11th, 2020
Size: 19.31 KB
Downloaded: 338 times
Market Replay CL 09-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 09-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 09-20 (NT8)


August 26th, 2020
Size: 196.43 MB
Downloaded: 45 times
Bar Type 4 *
Can anyone help me with what bar type this is and how I can get it?
 
Suggest other entries I might like
Details: Bar Type


August 17th, 2020
Size: 61.67 KB
Downloaded: 75 times

Keywords: bar type
Multi-Volume profile chart template 3 *
Here's the last chart template.
It's for NinjaTrader 8 Orderflow+ RTH, 1, 3 and 30 day profile.

This one is based on the CL.

I don't know if making the 30 day into a 90 day for contracts with longer rollover dates would work or not


cheers,
Brett
 
Suggest other entries I might like
Details: Multi-Volume profile chart template


July 27th, 2020
Size: 5.53 KB
Downloaded: 441 times

Keywords: profile volume
CongestionBoxOne 5 *
A few traders have asked if the CongestionBox could be altered to trigger with a breakout of one candle. I did some work and here is a solution that I believe works well with one candle breakout. One candle means there may be some false breakouts depending on your candle size....

As always, trade well....
Bob

As with other recent indies, this only calculates and displays what is on the display. If you scroll left, hit f5 to repopulate

8/6/2020
After suggestions from a few traders, I added some filtering to remove some of the 'counter trend' boxes. Included in this zip is an additional CongestionBox indie called CongestionBoxFilter. This one uses an EMA and HMA. A Bullish breakout candle will paint if the breakout candle is above both and slope of the HMA is up. The breakout candle can be painted for highlight and or an arrow below bull candle or above bear candle.

Have fun...
Bob
 
Suggest other entries I might like
Details: CongestionBoxOne


July 23rd, 2020
Size: 17.82 KB
Downloaded: 294 times
ATRTicks 5 *
Modified version of the standard ATR indicator to display in ticks.
Installs in "SeeT" folder.
 
Suggest other entries I might like
Details: ATRTicks


July 23rd, 2020
Size: 1.64 KB
Downloaded: 117 times
DataDownload NT8 ver 8.0.22.2 or higher Strategy for downloading large sets of symbols at once 5 *
You may want to download daily bars for the full list of SP500 index components, for lat 10 years.

1) Import the attached strategy in NT8
2) Start a Strategy Analyzer, set it up, choose SP500 list
3) Set the output folder path
4) Run. Strategy will go and download any missing data (a data connection needs to be up)
5) Enjoy a folder with individual files (named by Instrument.FullName property) daily bars
 
Suggest other entries I might like
Market Replay CL 08-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 08-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 08-20 (NT8)


July 19th, 2020
Size: 221.53 MB
Downloaded: 44 times
Divergence Indicators (Very Simple) 5 *
Update 7/22/20: added CD volume filter to the CumDelta Divergence indies and reduced calculations to only displayed candles.

Hello Traders, there are 3 indies in this Zip. Two of them (CDDivergence) require Ninjas Order Flow Cum Delta. One uses BA Cum Delta and the other is UpDownTick Cum Delta and paint the candle body if price is going the opposite direction of the Cum Delta.

The other indie will paint the candle body if price is going the opposite direction of the calculated HeikenAshi bar.

They alert you to when something is going on.... is it churn or a reversal? In the pic, the HADivergence is Yellow....Try them with various candle types and see what 'speaks" to you...

Note to users... I have started cutting down the system resource requirements on many of my indicators that do not need a lot of historical data. On these indies, they calculate only what is on the screen. If you want to scroll back, just hit f5 to re-populate the indicator. It's not a huge savings, but every tick counts

Trade Well...
Bob
 
Suggest other entries I might like
Details: Divergence Indicators (Very Simple)


July 16th, 2020
Size: 8.80 KB
Downloaded: 258 times
CongestionBoxLite 5 *
Hello Traders, attached is the CongestionBox indie that has been put on a diet. The indie finds congestive candle patterns and then paints the box when there is a breakout (2 candles to confirm). The box has a line that represents the VPOC of the box. I find that this indie, in concert with an MA of your choice works very well to find and keep you in a trend.

A few years ago, I downloaded the CongestionBox indie as submitted by creator jabeztrading. The indie had memory building and slow response issues. The bandaids that I applied at the time were a help so I re-released it. I have learned a few things along the way, and made some dramatic improvements wrt memory and responsiveness. On my system, a refresh of the old indie took 13seconds. This one is about 1 second.

Note to users... I have started cutting down the system resource requirements on many of my indicators that do not need a lot of historical data. On these indies, they calculate only what is on the screen. If you want to scroll back, just hit f5 to re-populate the indicator. It's not a huge savings, but every tick counts

Trade Well...
Bob
 
Suggest other entries I might like
Details: CongestionBoxLite


July 16th, 2020
Size: 7.73 KB
Downloaded: 167 times
LargeTrades Strategy NT8 5 *
Coded by bcomas July 2020. Email me for improvements or suggestions.

Trading the major transactions that have taken place during
short period of time and at the same price (Limit buyer / seller)

Scalping 1 minute timeframe . Catching the excess of volume.


Updated Version at October 2020

Download at: https://ninjatraderecosystem.com/user-app-share-download/largetrades-strategy-nt8-update/

* Days of the week
* OrderFlow Cumulative Delta option (Life time licences only)
* Boost if profit using the ATM option
* BreakEven option
* Halt trading if the account drops or reach the account target
* Prior Day HL visulal on chart

- Optimized for the Futures instrument MYM
- Fixed minor bugs

Parameters

vol = 150;
fix = 1;

// StopLoss & ProfitTarget
UseProtectiveStops = true;
StopLoss = 80;
ProfitTarget = 100;

// Daily Target
Contracts = 1;
DailyLossLimit = -100;
DailyProfitLimit = 100;
DailyTradesCount = 1;

// Email alerts
UseEmail = false;
EnableEntryAlert = false;
EnableExitAlert = false;
toEmailAddress = @"";

// Times
Session1 = true;
Session1Start = 0;
Session1End = 223059;

Session2 = false;
Session2Start = 90000;
Session2End = 110000;

Session3 = false;
Session3Start = 120000;
Session3End = 125900;
 
Suggest other entries I might like
Details: LargeTrades Strategy NT8


July 4th, 2020
Size: 9.83 KB
Downloaded: 838 times
Cleaned up version 5 *
Hello,

I've cleaned up the template, added weekly pivots to it along with daily pivots from Lizard indicators. Couldn't find the daily pivot zip though.

Also included a simple cumulative delta divergence indicator created by Bobc635 in the app store.

Edit: I just realized there's a 3rd party counter that won't transfer unless you have @tradetheplandan tradetheplan dot com tools and indicators.

Note:
If anyone is using the VLC indicator from VolumeLadderTrading dot com, I have a pretty good template. As well as indicators from TradeThePlan Just PM me
 
Suggest other entries I might like
Details: Cleaned up version


June 29th, 2020
Size: 31.41 KB
Downloaded: 328 times
Reset All Sim Accounts - Add-On 5 *
If you test numerous variations of your strategies using different SIM account, you know how annoying it is having to reset each one. It takes several mouse clicks just to rest one. So I made this add-on that resets all of them easily. It has saved me tons of time and headache.

To use - Goto New -> Reset All Sim Accounts
 
Suggest other entries I might like
Details: Reset All Sim Accounts - Add-On


June 28th, 2020
Size: 2.98 KB
Downloaded: 140 times

Keywords: reset sim
Tick Counter and Time displayed next to current bar 5 *
Displays Tick Counter and Time next to current bar.
Fonts can be changed for each
 
Suggest other entries I might like
Details: Tick Counter and Time displayed next to current bar


June 25th, 2020
Size: 2.72 KB
Downloaded: 205 times

Keywords: counter tick time
HOD - Head-Up Display 3 *
Simple but useful heads up display.

Show/Hide - Bid/Ask Lines, or extend them.
Show/Hide - Prior ,High, Open, and Low
Show/Hide - Spread
Show/Hide - Tick Count
Show/Hide - Bar % Complete

Something very simple that a default chart lacks.

I hope you find it useful.

6/28 - Newer version with options to change text colors
 
Suggest other entries I might like
Details: HOD - Head-Up Display


June 25th, 2020
Size: 6.14 KB
Downloaded: 221 times
Point of Control 5 *
Shows notch displayed on the price bar where the highest volume was traded.
Requires NT lifetime license for orderflow functionality.
 
Suggest other entries I might like
Details: Point of Control


June 25th, 2020
Size: 1.60 KB
Downloaded: 269 times

Keywords: control of point
Volume profile template for NT8 lifetime license 5 *
Hello,

I'm not sure if this is the right place but I wanted to share a template for NT8 lifetime license.
It incorporates a 3 day and 1 day volume profile along with vwap. In addition it incorporates SIM 22's ED's levels.

Add your favorite pivots for a better feel.

If this is located in the wrong area, I apologize.

brett

EDIT: The 3 day profile is from the Mind over markets: Dalton
Another good book is Anatomy of a Volume Profile Trader: Learn tips and strategies for trading the Volume Profile: Bruce Levy
 
Suggest other entries I might like
Details: Volume profile template for NT8 lifetime license


June 25th, 2020
Size: 15.28 KB
Downloaded: 372 times
Market Replay ES 06-20 (NT8) 5 of 5 5 *
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 5 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.005"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 5 of 5


June 20th, 2020
Size: 142.16 MB
Downloaded: 96 times
Market Replay ES 06-20 (NT8) 4 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 4 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 4 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 78 times
Market Replay ES 06-20 (NT8) 3 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 3 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 3 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 68 times
Market Replay ES 06-20 (NT8) 2 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 2 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 2 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 64 times
Market Replay ES 06-20 (NT8) 1 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 1 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 1 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 95 times
Market Replay CL 07-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 07-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 07-20 (NT8)


June 19th, 2020
Size: 257.45 MB
Downloaded: 76 times
ZigZagTicks 5 *
This is a modified version of the standard ZigZag NT indicator. Input is swing size in ticks.
I was looking for a lightweight swing indicator to use in another project and decided to modify the standard one.

Installs in a folder called "SeeT".
 
Suggest other entries I might like
Details: ZigZagTicks


May 25th, 2020
Size: 4.22 KB
Downloaded: 221 times

Keywords: swing ticks zigzag
Market Replay CL 06-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 06-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 06-20 (NT8)


May 25th, 2020
Size: 190.95 MB
Downloaded: 44 times
Market Replay CL 05-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 05-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 05-20 (NT8)


April 19th, 2020
Size: 249.82 MB
Downloaded: 72 times
Squeeze 5 *
Version 1.0

gemSqueeze is a modified squeeze indicator that also brackets bars during the squeeze to help visually identify breakouts.
 
Suggest other entries I might like
Details: Squeeze


April 12th, 2020
Size: 15.29 KB
Downloaded: 793 times

Keywords: breakout momentum squeeze volatility
RVOL V1 4 *
This is a relative volume indicator. I have manually gathered volume data and performed the calculations to verify that the indicator is accurate.

It is based on time, so cannot be used on non-time-based bars. If you do so, it will, at best, show nothing. At worst, it might blow up on you.

It calculates the average volume for the bar with the same Close() time over the previous X number of days. The value of X is input by the user.

It then compares the volume of the current bar to the average volume for that time of day. A negative result means that the current bar has below average volume and a positive result means the current bar has greater than average volume.

Be aware that the greater the number of days being averaged and the shorter the duration of the bars, the longer it'll take to plot the values. I hope the community finds this indicator useful.

Edit:
Oh, and I want to also let you know that if there are fewer days on the chart than what's entered in the lookback parameter (or whatever I called it), the indicator will provide the value based on the number of days available. Just be sure you have days enough on the chart to give you the values you're looking for.

Edit 2:
In answer to the question about a similar indicator for range bars, I'm afraid the logic won't hold up for that. This indicator looks for bars with the same time stamp from prior days. Range bars close at totally random times, based on how far price moves. It's very, very unlikely there'd EVER be one on a prior day that closed at the same time as a range bar from the current day.
 
Suggest other entries I might like
Details: RVOL V1


April 5th, 2020
Size: 3.16 KB
Downloaded: 374 times
CandleStickDoctor_NT8 5 *
gemCandleStickDoctor
version: 1.1.1
Note: Found and fixed a bug and added an additional pattern, as well as the ability to paint the entire bar or just the outline

This indicator identifies candlestick patterns as bars develop and historically. You can click on the bars to see the pattern identified. The core of the patterns uses those in the Ninjatrader CandleStick Pattern indicator. Additional patterns have been added and this searches for ALL the patterns. If more than one pattern is identified, it will show you all of them. The indicator also keeps score based on the patterns identified (bullish + 1, bearish - 1) which is exposed as a series named Trigger so you can use it for other indicators or strategies. If there are any CandleStick pattern experts out there that want to add patterns or find any errors with those already present, please let me know and perhaps we can make this even better.

Also note: There is an NT7 version of the site. bitDavid identified some errors (thank you). That version will not be supported. Pleasure use the current NT8 version.

Current patterns identified are:

NoSignal
BearishBeltHold
BearishEngulfing
BearishHarami
BearishHaramiCross
BullishBeltHold
BullishEngulfing
BullishHarami
BullishHaramiCross
DarkCloudCover
Doji
DownsideTasukiGap
EveningStar
FallingThreeMethods
Hammer
HangingMan
InvertedHammer
MorningStar
PiercingLine
RisingThreeMethods
BullishShootingStar
BearishShootingStar
StickSandwich
ThreeBlackCrows
ThreeWhiteSoldiers
UpsideGapTwoCrows
UpsideTasukiGap
BullishTweezerBottom
BearishTweezerTop
BullishKicker
BearishKicker
BullishDragonflyDoji
BearishDragonflyDoji
BullishGravestoneDoji
BearishGravestoneDoji
BullishThreeBarReversal
BearishThreeBarReversal
 
Suggest other entries I might like
Details: CandleStickDoctor_NT8


April 4th, 2020
Size: 15.04 KB
Downloaded: 463 times
Margin Plot 4 *
Plot Account Balance, Intraday Margin*Lots, Excess Intraday Margin(if available in control panel from broker).

You must select the account in the indicator parameters.
 
Suggest other entries I might like
Details: Margin Plot


March 26th, 2020
Size: 2.32 KB
Downloaded: 165 times

Keywords: plot margin
Multi Period Candles for NT-8 5 *
This imports as a Chart Style not an Indicator.

***Note*** After you import this Chart style, you will have to re-start NinjaTrader. ***End Note***

I tried using an indicator that was built to plot multi-period candles but I found it was resource "heavy".
Additionally the indicator had some issues when used on different Trading Hour Templates.

The result was to modify the "Box" Chart Style that was built into NT-8 to plot a Candlestick.

The default color choices were based on my preferences for Black background charts,
You will need to decide on your own preferences and then save them as a default on your platform.

Special thanks are due to @TWDsje (aka SpeculatorSeth) for his coding expertise in completing this task.
 
Suggest other entries I might like
Details: Multi Period Candles for NT-8


March 24th, 2020
Size: 2.52 KB
Downloaded: 451 times
Market Replay CL 04-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 04-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 04-20 (NT8)


March 18th, 2020
Size: 298.23 MB
Downloaded: 83 times
Market Replay ES 03-20 (NT8) 4 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 4 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 4 of 4


March 18th, 2020
Size: 41.83 MB
Downloaded: 116 times
Market Replay ES 03-20 (NT8) 3 of 4 5 *
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 3 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 3 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 107 times
Market Replay ES 03-20 (NT8) 2 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 2 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 2 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 111 times
Market Replay ES 03-20 (NT8) 1 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 1 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 1 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 119 times
chart time indicator for lag time charts in ninjatrader 4 *
Chart Time indicator to find Lag in seconds and milliseconds

It will display three things in the upper right corner of the chart:

• The core time of NT8
• The chart time of NT8
• The difference of the two times (if the Chart time is behind the core time, it will be a negative number).

EXAMPLE
Here is an example of what you will see in the upper right corner of your chart when you load the indicator on your chart:

12:29:28:529 12:29:28:257 -00.272

USE
I watch this indicator near the start and end of the regular session when my charts will typically lag the market. While trading these times or any other high volume times, when I see a chart lag, I then use the DOM to ensure I see the fastest pricing information that NT8 offers (that I have found).

I didn't build the indicator, just found it on ninjatrader forum (it seems to me that more people are having problems with the lagging of ninjatrader)
 
Suggest other entries I might like
Details: chart time indicator for lag time charts in ninjatrader


March 6th, 2020
Size: 2.62 KB
Downloaded: 147 times
QQE (Quantitative Qualitative Estimation) 5 *
This is simply a conversion of the QQE for NT7 by Fat Tails.
Please refer to his post in the NT7 downloads section for details.
 
Suggest other entries I might like
Details: QQE (Quantitative Qualitative Estimation)


February 29th, 2020
Size: 6.83 KB
Downloaded: 639 times

Keywords: divergence qqe qualitative quantitative rsi
ATR in Tick and USD 5 *
This is a fork from Lizard's amaATR's 1.1 version and when installed will also be put into the Lizard folder as "atrTick". Essentially, I created this because ATR is such an important concept and the way the current indicators are built is to give a value based on points. This makes "at a glance" analysis hard because you need to do some arithmetic.

This indicator will display the ATR in either ticks or dollars and will make your chart or Market Analyzer cleaner as comparisons between different instruments makes more sense. In the 15M screenshot provided, it looks like /YM moves the most on the default ATR, but because of it's point value it actually moves less than the /ES and /NQ in terms of dollar value. Another great example is /ZB. It doesn't move many ticks, but it's dollar amount is comparable to the /ES

V 1.1
Fixed the archive and a rounding error for the dollar value, so you should get the exact dollar amount relative to ticks.
 
Suggest other entries I might like
Details: ATR in Tick and USD


February 23rd, 2020
Size: 5.64 KB
Downloaded: 447 times
Market Replay CL 03-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 03-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 03-20 (NT8)


February 18th, 2020
Size: 219.29 MB
Downloaded: 63 times
RSIOMA for NT-8 5 *
In response to a request from @bobwest this is an NT-8 version of the RSIOMA ported from MetaTrader by @ivanjocic and converted to NT-8 by @Prtester

Here is a link to the NT-7 version for your reference:


This indicator takes two moving averages, calculates their RSI (Relative Strength Index) and then also adds a moving average of the calculated RSI. These two lines now can accurately signal the trend changes. They are shown in the separate window where they change from 0 to 100. Additional histogram indicator is shown for quick reference below the lines.

On the picture the bold blue line is RSI of the moving averages, the thin violet line is its moving average. RSI above MA and RSI above level 50 is a signal of a bullish trend. RSI below MA and RSI below level 50 is a signal of a bearish trend. One can also buy when the RSI breaks level 20 from below and sell when RSI breaks level 80 from above, but those are weaker signals. Histogram provides quick reference. Green lines signal BUY, red signal SELL, magenta mean overbought, blue mean oversold.
 
Suggest other entries I might like
Details: RSIOMA for NT-8


February 11th, 2020
Size: 3.77 KB
Downloaded: 850 times

Keywords: nt-8 rsioma
gwaSuperDrive 3 *
This was forked and converted from https://futures.io/download/ninjatrader-7/indicators/785-download.html?view I am not taking any credit other then the effort I put in with the help of some others on this forum to get this converted and working successfully in NT8.

Tested on NT 8.0.20.1 64bit

version 1.1

Shows momentum and volatility
Sell when Red opens above Green
Buy when green opens above Red

Enjoy and happy trading!



Change Log
-------------
v1.1
* Fixed import issue, by exporting Ninjascript properly with the export tool

v1.0
converted to NT8
 
Suggest other entries I might like
Details: gwaSuperDrive


February 10th, 2020
Size: 10.21 KB
Downloaded: 775 times
Bband2 with Color for NinjaTrader 8 5 *
Conversion to NinjaTrader 8 of the "Bband2 with Color" from NinjaTrader 7. ( found here. )

Exported using NinjaTrader 8 version: 8.0.15.1

Feb. 16, 2020 - Updated drawing logic to improve drawing performance. Please update your copy using this new version.
 
Suggest other entries I might like
Details: Bband2 with Color for NinjaTrader 8


January 25th, 2020
Size: 5.63 KB
Downloaded: 382 times
SOAP NT8
Hello again folks,

I created a version of the SOAP(Served On A Platter) indicator from think or swim. It is similar to the Custom TDI I submitted several weeks ago and similar rules apply. It's a layering of stochastics and I included a layered stochastic RSI for a little more information that allows for precision entries/exits. As with the TDI, you'll have to import the indicator settings into your charts. Happy Trading!
 
Suggest other entries I might like
Details: SOAP NT8


January 24th, 2020
Size: 58.88 KB
Downloaded: 174 times

Keywords: soap
Market Replay CL 02-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 02-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 02-20 (NT8)


January 18th, 2020
Size: 170.64 MB
Downloaded: 72 times
Custom Trader Dynamic Index (TDI) NT8 4 *
Hey guys, I've discovered a custom TDI that can be created without coding. All the indicators are available if you have NT8. Instructions are as follows:

Double stochastics 10 period; Scale justification - right

SUM 3 period; Input series - RSI period 13; Scale justification - overlay
SUM 18 period; Input series - RSI period 13; Scale justification - left
Bollinger; Input series - RSI period 13; Scale justification - right; Period 34, Standard deviations - 2 (Set upper and lower band to transparent to hide or you can leave them if you prefer)

* Best trade set ups for longs is when the 2 SUMs are above or crossing the middle Bollinger band and double stochastic is oversold. The reverse is true for shorts. You can also trade it when fast SUM crosses slow SUM just like other oscillators. It's useful to have it on different time frames and you can adjust the period setting to fit your trading needs. Play around with it and let me know how it works for you!

*The Download is a copy of my indicator template that you'll have to import into your charts or you can follow the instructions to create it yourself.
 
Suggest other entries I might like
Details: Custom Trader Dynamic Index (TDI) NT8


December 22nd, 2019
Size: 52.70 KB
Downloaded: 371 times
Market Replay CL 01-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 01-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 01-20 (NT8)


December 20th, 2019
Size: 191.85 MB
Downloaded: 79 times
Market Replay ES 12-19 (NT8) 3 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 3 of 3


December 20th, 2019
Size: 62.99 MB
Downloaded: 97 times
Market Replay ES 12-19 (NT8) 2 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 2 of 3


December 20th, 2019
Size: 250.00 MB
Downloaded: 104 times
Market Replay ES 12-19 (NT8) 1 of 3
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 1 of 3


December 20th, 2019
Size: 250.00 MB
Downloaded: 110 times
Formula Indicator 5 *
Formula indicator which allows you to generate new series on the fly by formula

Simple formula examples:
CLOSE(0) / CLOSE(1)
(HIGH(0) - LOW(0)) / 2
MATH-LOG10(CLOSE(0))
CLOSE(0) / VALUE(SMA(14), 0)
(CLOSE(0) / CLOSE(1)) * 14
VALUE(SMA(BARS-ARRAY(0),14), 0)
VALUE(SMA(14), 0) - VALUE(EMA(14), 0)


Comparison to NinjaScript syntax (left is formula expression - right is NinjaScript/C# expression):
CLOSE() - Close
CLOSE(0) - Close[0]
VALUE(VOL(),0) - VOL()[0]
VALUE(CLOSE(), 0) - Close[0]
BARS-ARRAY(0) - BarsArray[0]
VALUE(SMA(BARS-ARRAY(0), 14), 0) - SMA(BarsArray[0], 14)[0]
VALUE(SMA(14),0) - SMA(14)[0]
VALUE(MACD(12,26,9),0) - MACD(12,26,9)[0]
MATH-LOG10(CLOSE(0)) - Math.Log10(Close[0])

Supported Price Series:
CLOSE, OPEN, HIGH, LOW, WEIGHTED, TYPICAL, MEDIAN

Supported Indicators:
ADL, ADX, ADXR, AroonOscillator, ATR, BOP, CCI, CMO, DEMA, DisparityIndex, DM, EMA, FOSC, HMA, KAMA, LinReg, LinRegIntercept, LinRegSlope, MACD, MAMA, MAX, MFI, MIN, Momentum, OBV, ParabolicSAR, PFE, Range, RIND, ROC, RSI, RSquared, StdDev, SMA, StochRSI, SUM, TEMA, TMA, TSF, TSI, UltimateOscillator, VMA, VOL, WilliamsR, WMA, ZLEMA

Supported math functions:
MATH-ABC, MATH-LOG, MATH-LOG10, MATH-EXP, MATH-SQRT, MATH-ACOS, MATH-ASIN, MATH-ATAN, MATH-ATAN2, MATH-CEILING, MATH-COS, MATH-COSH, MATH-E, MATH-FLOOR, MATH-IEEEREMAINDER, MATH-MAX, MATH-MIN, MATH-PI, MATH-POW, MATH-ROUND, MATH-SIN, MATH-SINH, MATH-TAN, MATH-TANH

Also attaching tests results which can help you to see different combination of formulas:
[OK] "4 + 2" (expected: 6 actual: 6)

[OK] "5 - 2" (expected: 3 actual: 3)
[OK] "6 / 2" (expected: 3 actual: 3)
[OK] "7 * 2" (expected: 14 actual: 14)
[OK] "7 * 2 + 4" (expected: 18 actual: 18)
[OK] "(3 * 2) + 5" (expected: 11 actual: 11)
[OK] "VALUE(SMA(20), 0) - VALUE(SMA(10), 0)" (expected: -0.000764999999999016 actual: -0.000764999999999016)
[OK] "( ( VALUE(SMA(14), 0) - VALUE(SMA(14), 1) ) / VALUE(SMA(14), 1) ) * 100" (expected: 0.0148253190666608 actual: 0.0148253190666608)
[OK] "MATH-ABC(5)" (expected: 5 actual: 5)
[OK] "MATH-ABC(-5)" (expected: 5 actual: 5)
[OK] "MATH-ABC( VALUE(WilliamsR(14), 0) )" (expected: 21.8750000000039 actual: 21.8750000000039)
[OK] "MATH-LOG(MATH-EXP(9.9))" (expected: 9.9 actual: 9.9)
[OK] "MATH-LOG10(0.105)" (expected: -0.978810700930062 actual: -0.978810700930062)
[OK] "MATH-LOG10(0.5)" (expected: -0.301029995663981 actual: -0.301029995663981)
[OK] "MATH-LOG10(0.798)" (expected: -0.0979971086492706 actual: -0.0979971086492706)
[OK] "MATH-LOG10(CLOSE(0))" (expected: 0.0450881615428167 actual: 0.0450881615428167)
[OK] "MATH-SQRT(2870.3)" (expected: 53.5751808209734 actual: 53.5751808209734)
[OK] "MATH-ACOS(45)" (expected: NaN actual: NaN)
[OK] "VALUE(CLOSE(), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "CLOSE(0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(OPEN(), 0)" (expected: 1.1091 actual: 1.1091)
[OK] "OPEN(0)" (expected: 1.1091 actual: 1.1091)
[OK] "VALUE(HIGH(), 0)" (expected: 1.10985 actual: 1.10985)
[OK] "HIGH(0)" (expected: 1.10985 actual: 1.10985)
[OK] "VALUE(LOW(), 0)" (expected: 1.1089 actual: 1.1089)
[OK] "LOW(0)" (expected: 1.1089 actual: 1.1089)
[OK] "VALUE(WEIGHTED(), 0)" (expected: 1.1093875 actual: 1.1093875)
[OK] "WEIGHTED(0)" (expected: 1.1093875 actual: 1.1093875)
[OK] "VALUE(MEDIAN(), 0)" (expected: 1.109375 actual: 1.109375)
[OK] "MEDIAN(0)" (expected: 1.109375 actual: 1.109375)
[OK] "VALUE(TYPICAL(), 0)" (expected: 1.10938333333333 actual: 1.10938333333333)
[OK] "TYPICAL(0)" (expected: 1.10938333333333 actual: 1.10938333333333)
[OK] "VALUE(ADL(), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(BARS-ARRAY(0)), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(CLOSE()), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(SMA(1)), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADX(14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(BARS-ARRAY(0), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(CLOSE(), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(SMA(1), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADXR(10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(BARS-ARRAY(0),10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(CLOSE(), 10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(SMA(1), 10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(AroonOscillator(14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(BARS-ARRAY(0), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(CLOSE(), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(SMA(1), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(ATR(14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(BARS-ARRAY(0), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(CLOSE(), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(SMA(1), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(BOP(14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(BARS-ARRAY(0), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(CLOSE(), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(SMA(1), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(CCI(14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(BARS-ARRAY(0), 14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(CLOSE(), 14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(SMA(1),14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CMO(14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(BARS-ARRAY(0), 14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(CLOSE(), 14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(SMA(1), 14), 0)" (expected: 45.0980392157274 actual: 45.0980392157274)
[OK] "VALUE(DEMA(14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(CLOSE(), 14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(SMA(1), 14), 0)" (expected: 1.10915796254565 actual: 1.10915796254565)
[OK] "VALUE(DisparityIndex(25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(BARS-ARRAY(0), 25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(CLOSE(), 25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(SMA(1),25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DM(14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(BARS-ARRAY(0), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(CLOSE(), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(SMA(1), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM.DiPlus(14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(BARS-ARRAY(0), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(CLOSE(), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(SMA(1), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiMinus(14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(BARS-ARRAY(0), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(CLOSE(), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(SMA(1), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(EMA(14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(CLOSE(), 14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(SMA(1), 14), 0)" (expected: 1.10847618080927 actual: 1.10847618080927)
[OK] "VALUE(FOSC(14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(BARS-ARRAY(0), 14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(CLOSE(), 14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(SMA(1), 14), 0)" (expected: -0.00837003285063601 actual: -0.00837003285063601)
[OK] "VALUE(HMA(14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(CLOSE(), 14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(SMA(1), 14), 0)" (expected: 1.10938436506827 actual: 1.10938436506827)
[OK] "VALUE(KAMA(2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(BARS-ARRAY(0), 2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(CLOSE(), 2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(SMA(1), 2,10,30), 0)" (expected: 1.10848323049357 actual: 1.10848323049357)
[OK] "VALUE(LinReg(14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(BARS-ARRAY(0), 14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(CLOSE(), 14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(SMA(1), 14), 0)" (expected: 1.10949285714447 actual: 1.10949285714447)
[OK] "VALUE(LinRegIntercept(14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(BARS-ARRAY(0), 14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(CLOSE(), 14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(SMA(1), 14), 0)" (expected: 1.10712142856986 actual: 1.10712142856986)
[OK] "VALUE(LinRegSlope(14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(BARS-ARRAY(0), 14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(CLOSE(), 14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(SMA(1), 14), 0)" (expected: 0.000182417582661881 actual: 0.000182417582661881)
[OK] "VALUE(MACD(12,26,9),0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(BARS-ARRAY(0),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(CLOSE(),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(SMA(1),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD.Diff(12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(BARS-ARRAY(0), 12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(CLOSE(), 12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(SMA(1), 12,26,9), 0)" (expected: 0.000182642769187236 actual: 0.000182642769187236)
[OK] "VALUE(MAMA(0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(BARS-ARRAY(0), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(CLOSE(), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(SMA(1), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA.Fama(0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(BARS-ARRAY(0), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(CLOSE(), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(SMA(1), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAX(14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(BARS-ARRAY(0), 14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(CLOSE(), 14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(SMA(1), 14), 0)" (expected: 1.10940000000002 actual: 1.10940000000002)
[OK] "VALUE(MFI(14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(BARS-ARRAY(0), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(CLOSE(), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(SMA(1), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MIN(14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(BARS-ARRAY(0), 14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(CLOSE(), 14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(SMA(1), 14), 0)" (expected: 1.10695000000002 actual: 1.10695000000002)
[OK] "VALUE(Momentum(14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(BARS-ARRAY(0), 14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(CLOSE(), 14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(SMA(1), 14), 0)" (expected: 0.00230000000000175 actual: 0.00230000000000175)
[OK] "VALUE(OBV(), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(BARS-ARRAY(0)), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(CLOSE()), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(SMA(1)), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(ParabolicSAR(0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(BARS-ARRAY(0), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(CLOSE(), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(SMA(1), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(PFE(14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(BARS-ARRAY(0), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(CLOSE(), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(SMA(1), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(Range(), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(BARS-ARRAY(0)), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(CLOSE()), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(SMA(1)), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(RIND(3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(BARS-ARRAY(0), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(CLOSE(), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(SMA(1), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(ROC(14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(BARS-ARRAY(0), 14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(CLOSE(), 14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(SMA(1), 14), 0)" (expected: 0.207749977418635 actual: 0.207749977418635)
[OK] "VALUE(RSI(14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(BARS-ARRAY(0), 14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(CLOSE(), 14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(SMA(1), 14,3), 0)" (expected: 65.4724695863158 actual: 65.4724695863158)
[OK] "VALUE(RSquared(8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(BARS-ARRAY(0), 8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(CLOSE(), 8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(SMA(1), 8), 0)" (expected: 0.498626370943076 actual: 0.498626370943076)
[OK] "VALUE(StdDev(14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(BARS-ARRAY(0), 14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(CLOSE(), 14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(SMA(1), 14), 0)" (expected: 0.000796612726947901 actual: 0.000796612726947901)
[OK] "VALUE(SMA(14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(CLOSE(), 14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(SMA(1), 14), 0)" (expected: 1.10830714285716 actual: 1.10830714285716)
[OK] "VALUE(StochRSI(14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(BARS-ARRAY(0), 14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(CLOSE(), 14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(SMA(1), 14), 0)" (expected: 0.860111194913856 actual: 0.860111194913856)
[OK] "VALUE(SUM(14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(BARS-ARRAY(0), 14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(CLOSE(), 14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(SMA(1), 14), 0)" (expected: 15.5163000000003 actual: 15.5163000000003)
[OK] "VALUE(TEMA(14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(CLOSE(), 14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(SMA(1), 14), 0)" (expected: 1.10945373542599 actual: 1.10945373542599)
[OK] "VALUE(TMA(15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(BARS-ARRAY(0), 15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(CLOSE(), 15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(SMA(1), 15), 0)" (expected: 1.10825546875001 actual: 1.10825546875001)
[OK] "VALUE(TSF(3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(BARS-ARRAY(0), 3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(CLOSE(), 3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(SMA(1), 3,14), 0)" (expected: 1.11004010989245 actual: 1.11004010989245)
[OK] "VALUE(TSI(3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(BARS-ARRAY(0), 3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(CLOSE(), 3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(SMA(1), 3,14), 0)" (expected: 38.344800300326 actual: 38.344800300326)
[OK] "VALUE(UltimateOscillator(7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(BARS-ARRAY(0), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(CLOSE(), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(SMA(1), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(VMA(9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(BARS-ARRAY(0), 9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(CLOSE(), 9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(SMA(1), 9,9), 0)" (expected: 1.10822574301697 actual: 1.10822574301697)
[OK] "VALUE(VOL(), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(BARS-ARRAY(0)), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(CLOSE()), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(SMA(1)), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(WilliamsR(14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(BARS-ARRAY(0), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(CLOSE(), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(SMA(1), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WMA(14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(CLOSE(), 14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(SMA(1), 14), 0)" (expected: 1.10870238095293 actual: 1.10870238095293)
[OK] "VALUE(ZLEMA(14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(CLOSE(), 14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(SMA(1), 14), 0)" (expected: 1.10933885376534 actual: 1.10933885376534)
 
Suggest other entries I might like
Details: Formula Indicator


December 14th, 2019
Size: 3.39 KB
Downloaded: 335 times
BTOpeningRange v2 5 *
This is an upgrade from the original BTOpeningRange indicator by Jason Chan (bearishtrader).
The v1 indicator didn't print the open price, only the High/Low range. The open price plot is now available.
Also, you can configure when to stop the plot. By default, the plot will stop when the regular session ends.
The plots, colors and times are all configurable in the properties screen.

I searched high and low for a free, simple indicator with the open range and price. Hopefully this will be useful for anyone looking for the same thing
 
Suggest other entries I might like
Details: BTOpeningRange v2


December 10th, 2019
Size: 2.99 KB
Downloaded: 437 times
Market Replay CL 12-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 12-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-19 (NT8)


November 28th, 2019
Size: 186.36 MB
Downloaded: 72 times
Convert Market Replay(NRD) to CSV and Import ticks format 5 *
This strategy allows you:
- convert market-replay(NRD) to CSV format (for each day separately)
- convert market-replay to NinjaTrader ticks import format (*.Last.txt, *.Ask.txt, *.Bid.txt)

How to use it:
1) Connect to Market Replay Connection
2) In strategy tab add MarketReplayDumpStrategy and select Contract you're trying to convert for example ES 09-19(make sure that you have any market replays for that contact). TimeFrame of strategy do not matter, same as DaysToLoad, but better select 1 day to load it faster.
3) Make sure folder from strategy settings exists
4) Enable the strategy and watch Output window

* Dump process can be multi-threaded, you can control that via MaxDegreeOfParallelism
* Creation of import data is single threaded since it is writing to one file
* Strategy will automatically detect life time of contact by expiration/rollover dates from NinjaTrader, and adds extra 3 days before and after
* Once conversion process is done strategy will disable itself
* When importing(Tools->Import->Historical Data) set "Time Zone of imported Data" to your NinjaTrader TimeZone(Tools->Options->General->Time Zone)
* Tested on 8.0.19.1 64-bit
 
Suggest other entries I might like
Details: Convert Market Replay(NRD) to CSV and Import ticks format


November 25th, 2019
Size: 161.72 KB
Downloaded: 115 times
RSI in Laguerre Time with Fractal Energy 5 *
This is a NT8 converted version of the TOS (ThinkOrSwim) indicator.

You can use it to trade reversals or continuation whenever both the RSI Lag and FE are in confluence.

More usage details can be found on the TOS board here:
https://usethinkscript.com/threads/rsi-laguerre-indicator-with-fractal-energy-usage-notes.219/
 
Suggest other entries I might like
Details: RSI in Laguerre Time with Fractal Energy


November 20th, 2019
Size: 7.50 KB
Downloaded: 653 times
CandleCode V1.0 for NT8 5 *
This is a simplified variation of Viktor Likhovidov's digital coding of candlesticks as seen in the September 2001 issue of Stocks & Commodities. Each candlestick is converted into a 3 digit number.

First Digit = High - Open
Second Digit = High - Close
Third Digit = Open - Low

Try it with various bar types and you will see different patterns emerge for minute, range, renko, etc. bar types.

This indie may have value as signaling an entry or exit, especially when used with other indies. Plus, anyone wishing to edit the code will find it very simple and easy to edit.

Those who export their chart data to Excel may find this column of data useful.
 
Suggest other entries I might like
Details: CandleCode V1.0 for NT8


October 23rd, 2019
Size: 1.57 KB
Downloaded: 347 times
Market Replay CL 11-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 11-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 11-19 (NT8)


October 23rd, 2019
Size: 218.68 MB
Downloaded: 75 times
Market Replay CL 10-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 10-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 10-19 (NT8)


September 18th, 2019
Size: 259.80 MB
Downloaded: 112 times
Market Replay ES 09-19 (NT8) 3 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 3 of 3


September 14th, 2019
Size: 189.73 MB
Downloaded: 127 times
Market Replay ES 09-19 (NT8) 2 of 3
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 2 of 3


September 14th, 2019
Size: 250.00 MB
Downloaded: 141 times
Market Replay ES 09-19 (NT8) 1 of 3 3 *
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 1 of 3


September 14th, 2019
Size: 250.00 MB
Downloaded: 144 times
irROCVolatility Version-1.0 for NT-8.0.17.2 64-bit 5 *
I used to use Excel to calculate and average the end-of-day readings of three different Rate Of Change indicators to see if I could graph the differences in Directional Bias across a number of different Futures contracts (Equities, Treasuries, Currencies, Metals, Energy, Grains) in an effort to decide where to focus my trading efforts and capital.

The exercise was time consuming and not that helpful over the long term which lead me to abandon the project, until recently when I revisited the idea using NT-8.

The different period settings I used for the original project (on a Daily chart) were 10, 25 and 35 (Days),
and (on a Weekly chart) were 2, 5 and 7 (Weeks).

The irROCVolatility indicator displays the average of three different (10, 25, 35) ROC (Rate-of-Change) indicators to assist in highlighting directional bias while indicating increases and decreases in Volatility.

I was surprised by the way the indicator works on the smaller Intraday time frames that many of us use as day traders.

I find it helps when I can't understand what Delta is trying to tell me. Hopefully you'll find it useful too.

Trade well
 
Suggest other entries I might like
Details: irROCVolatility Version-1.0 for NT-8.0.17.2 64-bit


September 12th, 2019
Size: 3.79 KB
Downloaded: 863 times
Market Replay CL 09-19 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 09-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 09-19 (NT8)


August 18th, 2019
Size: 226.32 MB
Downloaded: 90 times
Time Zone Colors (NT8) 5 *
this is version for NT8  
Suggest other entries I might like
Details: Time Zone Colors (NT8)


August 13th, 2019
Size: 4.40 KB
Downloaded: 268 times
Market Replay CL 08-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 08-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 08-19 (NT8)


July 19th, 2019
Size: 220.91 MB
Downloaded: 120 times
Market Replay ES 06-19 (NT8) 3 of 3
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 3 of 3


July 2nd, 2019
Size: 223.63 MB
Downloaded: 138 times
Market Replay ES 06-19 (NT8) 2 of 3
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 2 of 3


July 1st, 2019
Size: 250.00 MB
Downloaded: 130 times
Market Replay ES 06-19 (NT8) 1 of 3 4 *
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 1 of 3


June 30th, 2019
Size: 250.00 MB
Downloaded: 135 times
irDeltaMomentumV2 for NT-8.0.18.1 64-bit 5 *
Indicator updated to Version 2 2019-09-07
Managed to get this sorted out today (finally) for NT-8, with the help of a friend.

As the name implies this is a Delta Momentum indicator (similar to one of the Gomi tools we all used on NT-7).

One thing to note however is that this indicator uses the Order Flow Cumulative Delta that was built into the lifetime license version of NinjaTrader 8 so this will not work with some of the basic versions of the platform.

***Note***
I added some functionality that was missing in the original version (due to my lack of coding skills), this version gives the user the ability to choose the Delta Calculation Type, BidAsk or UpDownTick.

***Note-2***
I'm not sure why, but the file that will download has the original file name even though the indicator included is the corrected version-2.

Enjoy,
TGN
 
Suggest other entries I might like
Details: irDeltaMomentumV2 for NT-8.0.18.1 64-bit


June 25th, 2019
Size: 2.71 KB
Downloaded: 1426 times

Keywords: 2 delta momentum nt-8 version:
Market Replay CL 07-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 07-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay


The file will create a folder with the relevant front month and a series of .nrd files inside (one per day).

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 07-19 (NT8)


June 21st, 2019
Size: 268.85 MB
Downloaded: 92 times
SquareOf9 5 *
Ben Letto's publicly available OpenSource code for Gann Square of 9 lines. These are like fractal areas.

Converted from NT7 to NT8.
 
Suggest other entries I might like
Details: SquareOf9


May 28th, 2019
Size: 6.44 KB
Downloaded: 380 times

Keywords: gann square 9 squareof9
Market Replay CL 06-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 06-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 06-19 (NT8)


May 28th, 2019
Size: 271.36 MB
Downloaded: 85 times
Wicks & Tails 4 *
I've been a fan of Better Renko bars for several years now and was looking for a way to identify when a Wick or a Tail on a Better Renko bar was larger than the setting I had chosen.

Eg., Using a 4 Better Renko bar setting on the ES and looking for Wicks or Tails that were 5 ticks or greater.

This little indicator will do that for you. It simply draws an Arrow symbol above or below the corresponding Wick or Tail.

When I trade the NQ I prefer a 3 Better Renko bar, I use the irWicksandTails indicator to highlight 4 tick Wicks or Tails.

I don't use them for trade entries, I just note when they start to show up and rely on their presence to help me discern a "short term" trend bias.

This indicator is for NT-8, and was compiled with Version 8.0.17.2 64 Bit
 
Suggest other entries I might like
Details: Wicks & Tails


May 8th, 2019
Size: 3.55 KB
Downloaded: 643 times

Keywords: bias candlestick patterns tails trend wicks
ShowBid as Ray Updated Color 5 *
Fixed the color and width of Bid Ask lines for the update.
 
Suggest other entries I might like
Details: ShowBid as Ray Updated Color


May 1st, 2019
Size: 2.12 KB
Downloaded: 139 times
ShowBidAsk wh version
Show Bid Ask with Line segment. Conversion of ShowBid_wh code from NT7 to NT8.
 
Suggest other entries I might like
Details: ShowBidAsk wh version


May 1st, 2019
Size: 2.39 KB
Downloaded: 121 times

Keywords: ask bid line showbidask_wh
ShowBidAsk as Ray
Bid Ask Lines on chart
 
Suggest other entries I might like
Details: ShowBidAsk as Ray


April 30th, 2019
Size: 2.06 KB
Downloaded: 165 times
Macd vs Macd[1] indicator converted to NT8 5 *
I have converted my MACD3 from NT7 to NT8. It shows a blue and yellow line showing the MACD vs the MACD one bar ago.
 
Suggest other entries I might like
Details: Macd vs Macd[1] indicator converted to NT8


April 19th, 2019
Size: 2.07 KB
Downloaded: 468 times

Keywords: macd3
Market Replay CL 05-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 05-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 05-19 (NT8)


April 19th, 2019
Size: 257.12 MB
Downloaded: 105 times
BuySellNetVolume Version 2 for NT8 5 *
Version 2.0 April 12, 2019

Exported with NT Version 8.0.17.2


Indicator Name: fpgBuySellNetVolume_V2 Folder: Cheech

This version functionally replaces the previous version(s) described and available here but does not replace it when this version is installed. The previous version can be removed manually when and if desired.


Enhancements/Changes in Version 2

1. User can select from several MA types for the Moving Average plots, some of which are from Lizard Indicators made available by the GNU license. Credits to Lizard Indicators for both their indicators and the MA selection code.

2. When MA smoothing is selected the type can be an SMA, EMA, or the selected MA type. The smoothing period for each MA (fast, mid, and slow) can be set individually. A MA period of 0 eliminates the smoothing for that MA. Note: The Mid MA can be used as an intermediate period by specifying a value between the fast and slow periods. When the mid MA is requested with zero value for the period (default) will result in the mid period being calculated. If a period is specified and it is not between the fast and the slow the midpoint is calculated and used. No warning message is displayed.

3. The ability to apply volume filters (1-4) against the Net volume thereby limiting the Net volume histogram display a net bar only for the volume specified in the filter(s).

4. More control over how plots are displayed.

5. The divergence marker has been moved from the Total histogram to the Net histogram. This was done because the Total histogram can be turned off. The Net and/or Net filters must be active for the divergence marker to be displayed. If the Filter option is chosen without the Net plots being display the marker will only be display when there is a divergence on a filter value.|

6. The plot for the in-progress bar has its own color and can be user set. This plot is always displayed regardless of the display option selected.

7. This is not a change but a clarification as it also existed in the previous version. The position of the total line (above the line if a buy total and below the line if a sell total) is not based upon the last Close price but on the value (positive or negative) of the Net volume.

Similar to the previous version at times setting the Indicators region Type property to Logarithm is easier to read. The 2 instances of the indicator in the screen shot have the same operation modes set but the bottom one shows some of the ability to control what is displayed. without needing to independently setting each to transparent. If a particular display is turned off the values are still calculated and can be viewed in the Data Box.

Change Log

Date Description
April 12, 2019........Initial release
 
Suggest other entries I might like
Details: BuySellNetVolume Version 2 for NT8


April 12th, 2019
Size: 33.35 KB
Downloaded: 536 times

Keywords: buysellnetvolume tickreplay
irInsideBarsAll for NT-8.0.17.2 64-bit 5 *
As the name implies, this NT-8 indicator looks for Inside Bars and then simply paints an all white bar on your candle stick or OHLC bar chart, (it works on Hollow Candlestick charts also).

If the bar is an Inside Bar and is also a Doji (Open[0] == Close[0]) the indicator will paint a diamond on the close of the bar to highlight the Doji for you.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candlestick outlines and the candle bodies, one color regardless of the direction they close in (up or down). The indicator is set to calculate on bar close. (no need for it to be anything else)

Inside Bar condition: if(High[0] < High[1] && Low[0] > Low[1])
"Doji" condition: if(Open[0] == Close[0])

As I said, it's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".
 
Suggest other entries I might like
Details: irInsideBarsAll for NT-8.0.17.2 64-bit


April 6th, 2019
Size: 2.33 KB
Downloaded: 565 times

Keywords: bars candlestick inside patterns
Market Replay CL 04-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 04-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this

contract, meaning, this is data relevant only to when the contract becomes the

front month.
 
Suggest other entries I might like
Details: Market Replay CL 04-19 (NT8)


March 26th, 2019
Size: 228.39 MB
Downloaded: 114 times
TickRefresh
This indicator allows chart updates on each tick or price change with a user defined refresh time interval.

Settings:
Refresh Time Interval in Milliseconds = Number of milliseconds between chart refreshes.
Under "Set up > Calculate" choose between updates on each tick or each price price change.

Example values for Refresh Time Interval in Milliseconds:
0 = update on every tick or price change.
1 = maximum of 1000 updates per second.
10 = maximum of 100 updates per second.
20 = maximum of 50 updates per second.
100 = maximum of 10 updates per second.
The sane default is 10 milliseconds. But you can set it to 0 without issues.

See a demos here:
https://youtu.be/0sb8OANbcyo
https://youtu.be/O2bThPJBguU

Releases:
Version 1 March 25 2019: Initial release
Version 2 March 26 2019: Removed the TimerEventProcessor for better performance.
Version 3 March 28 2019: Optimized to prevent lag in fast markets if computer cannot keep up.
Version 4 April 4 2019: Improvements to latency and frame rate.
 
Suggest other entries I might like
Details: TickRefresh


March 25th, 2019
Size: 1.74 KB
Downloaded: 268 times
irReversalBarsV3 5 *
Updated previous version to correctly paint on top of other Paint Bar type indicators. March 26, 2019
Download link includes irReversalBarsV3
(for some reason the download link still refers to the previous "V2" version's name??)

This NT-8 indicator simply paints a Bullish Reversal bar or a Bearish Reversal bar on your candle stick or OHLC bar chart, it works on Hollow Candlestick charts also.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candle bodies solid regardless of the direction they close in (up or down).
The indicator is set to calculate on bar close. (no need for it to be anything else)

Bullish Reversal condition: if((High[0] > Open[0] && Low[0] < Low[1]) && Close[0] > Open [0])
Bearish Reversal condition: if((High[0] > High[1] && Low[0] < Open[0]) && Close[0] < Open [0])

It's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".

Enjoy,
Trade well.
 
Suggest other entries I might like
Details: irReversalBarsV3


March 21st, 2019
Size: 3.02 KB
Downloaded: 659 times
Trades Navigator (Strategy Analyzer Chart) 4 *
Lets you navigate trade by trade in Chart mode after back-testing in Strategy Analyzer.

How to use it:

1. Run your backtesting in Strategy Analyzer
2. When backtesting is done, select Chart mode
3. Attach indicator
 
Suggest other entries I might like
Details: Trades Navigator (Strategy Analyzer Chart)


March 18th, 2019
Size: 160.40 KB
Downloaded: 248 times
EquitiesV2 5 *
This version is identical in terms of functionality to version 1(which is located here: ).

I added the code (finally) to pull the expiry date from the chart and automatically add it to the indicator, so it no longer needs the user to manually input the date.

This indicator is for equities traders, to compare current performance with the 'other 3' equities and an average of all 4.

It adds data series for ES, NQ, RTY and YM, shows % change for each since the session open (24 hr session, not just the day session) as well as a simple moving average of all 4. The SMA period is user-configurable. Default is 10.

Hope you version 1 users find and download this one.


****
In reply to the comment about getting it to work in a strategy, I have never tried and am not a programming guru, but it seems likely that the 4 equity data series have to be loaded in the initializing sections of the strategy, which is before you call the indicator. The indicator can't load the data series for the strategy because it gets called after the strategy is initialized.
That'd be my guess. That you have to load the 4 data series in the strategy itself for the indicator to access them when it's called.
Good luck!
****
 
Suggest other entries I might like
Details: EquitiesV2


March 9th, 2019
Size: 5.36 KB
Downloaded: 268 times
Market Replay CL 03-19 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 03-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 03-19 (NT8)


February 22nd, 2019
Size: 244.21 MB
Downloaded: 112 times
BuySellNetVolume-NT8_V1_21 (fpgBuySellNetVolume) 5 *
Notice: This indicator has been deprecated and will no longer supported as it has been replaced by Version 2 posted here

Updated Version 1.21 March 12, 2019

Exported with NT Version 8.0.17.2


Version 1.21 Corrections are described in Change Log


Previous Version 1.1 March 5, 2019
Exported with NT Version 8.0.17.1 (note this has been changed)

Notice(posted on 2/10/2019 at 1:45 PM MST)

It appears that something has changed in the latest NT update (8.0.17.1) that effected this indicator. The version here has been recompiled and re-exported using the latest release. No code changes were made. The version date (2/10/2019) and number (1.01) in the indicator parameters section reflect this change. If you have updated to the latest NT version and are having a problem or getting error messages either recompile the indicator or download and install the latest version.

I apologize for any confusion.


Summary

This indicator is an enhanced version of the NT8 BuySellVolume indicator. The enhancements are as follows:
  • 1. Buys and Sells are show above and below the zero line,
  • 2. The Net Volume (Buys-Sells) is plotted accordingly,
  • 3. Total volume is displayed using a separate color and is shown accordingly,
  • 4. A divergence marker (Bar close is opposite the Net Volume) can be indicated (not enabled by default),
  • 5. Tick Replay (TR) is supported and defaults to display a different color for the TR Net Volume bars,
  • 6. The width of the Buy/Sell, total, and Net histogram bars can be set individually, and
  • 7. Option to reverse the Histogram Buy/Sell and Net widths so that the Net bar displays on the inside of the Buys/Sell bar.

Notes:
  1. At times the Net volume is so small it can not be seen with the indicator region parameter set in Linear Mode. This can be rectified by setting it to Log mode as shown in the screenshot.
  2. When changing the histogram bar sizes use odd numbers as the bars are painted from the midpoints.
  3. For a divergence to be detected in addition to the Net number and bar direction being opposite it must pass a percentage check. If too many (too few) divergences are detected the percentage can be changed to reduce (increase) the number detected.
  4. When using the Tick Replay with a large number of historical days (Days to Load) there may be a delay in the time it takes to initialize.
  5. The indicator is installed in a folder named “Cheech”.

Version 1.1 Enhancements
  1. Fast and Slow EMA of Net Buy and Sells with optional midrange which when set the period is the midpoint of the Fast/Slow period settings.
  2. User defined volume offset from Zero line will create a Zero Zone with optional region painting.
  3. Reorganized Indicator Parameters.

Version 1.1 Notes:
  1. If EMAs are too close together set the indicator panel properties Type Parameter to Logarithmic
  2. NT will display the upper and lower boundary lines (the zero zone) under the following conditions; 1. tick replay is enabled, 2. real time data is available (data feed is connected and market is opened), or, 3. the Zero Zone region painting is enabled. When any of the aforementioned are satisfied the lines will appear.

Version 1.21 Notes:
1. The labels of the MA plots were mis-labled as SMAs when they are actually EMAs.

Please PM me with either problems or questions instead of using the comments/rating section.


Change Log

Date_______Description
2/2/2019..........Initial release
2/10/2019........Recompiled and exported using NT 8.0.17.1
3/05/2019........Additional Enhancements described above
3/12/2019........Correct minor error in MA calculations, some code optimization, and Typos in Labels
4/13/2019........Deprecated, replaced by version 2
 
Suggest other entries I might like
Details: BuySellNetVolume-NT8_V1_21 (fpgBuySellNetVolume)


February 4th, 2019
Size: 7.94 KB
Downloaded: 645 times

Keywords: buysellnetvolume tickreplay
Market Replay CL 02-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 02-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 02-19 (NT8)


January 31st, 2019
Size: 256.64 MB
Downloaded: 122 times
_dnTrendChannel 5 *
Version 1.00 January 28 2019

This is a fib channel tool I designed to help measure patterns I encountered.

More info and a template can be found at this thread


Enjoy
 
Suggest other entries I might like
Details: _dnTrendChannel


January 28th, 2019
Size: 20.11 KB
Downloaded: 533 times
Hourly Pivots (amaPivotsHourly) 5 *
Version 1.0 January 14, 2019

The Hourly Pivots indicator applies the calculation used for daily floor pivots to intraday time frames. The indicator displays pivots for any selectable period of N minutes. All pivots are calculated from the high, low and close of the prior N-minute period. The pivots can be displayed as floor pivots, wide pivots or Fibonacci pivots. The indicator further plots the pivot range, which is a value area derived from the prior N-minute period.

The default setting of the indicator is 60 minutes. With default settings the indicator will display hourly pivots including the Main Pivot PP, Central Pivot CP, Directional Pivot DP, Pivot Range, R1, R2, R3, R4 S1, S2, S3 and S4. The first period always starts with the daily session break. Depending on the period selected, the last period of the session may terminate before completion. It will not carry over to the first period of the next session.

Pivot range: The pivot range is the range between CP and DP. It is a symmetrical range around the main pivot PP.

Prior high, low and close: The indicator also displays the high, low and close for the prior N-minute period. These levels often act as support or resistance for the consecutive N-minute period.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X
 
Suggest other entries I might like
Details: Hourly Pivots (amaPivotsHourly)


January 22nd, 2019
Size: 8.29 KB
Downloaded: 896 times

Keywords: fibonacci floorpivots high hourly low pivots resistance support
ScrollsRite for NinjaTrader 8 4 *
This script installs as an indicator and allows users to drag their charts in any direction with a mouse. It is a feature of eSignal charting which I used for many years and simply could not live without when I moved to NinjaTrader. It is basically a rewrite of the NT7 version with the same name on this site and has been around for some time.

In truth NT8 provides this functionality already ( by holding down the Ctrl key ) but this indicator makes it that much easier by enabling it all the time.

I don't have much screen time last few years and I don't check in here that often but I will try and monitor for awhile to see that it works as expected. Leave comments in the original thread provided below.


Some Notes:

- If a chart has the Price Scale located on the Left side instead of the Right side of the chart as is normal, then you must configure ScrollsRite Scale Justification to the Left side also.

- To disable it temporarily simply uncheck the "Visible" checkbox in the ScrollsRite properties screen.

- If the Market suddenly shoots off the screen then hit the "F" icon at the top of the Price Scale to bring it back quickly.

Link to original thread:

Scrolls_Lite ( Vertical Drag/AutoScroll)
 
Suggest other entries I might like
Details: ScrollsRite for NinjaTrader 8


January 21st, 2019
Size: 2.36 KB
Downloaded: 326 times
CongestionBoxBC 5 *
Hello Traders. This indicator looks for a congestion of candles and then a break out. Once the breakout is confirmed, it paints the box up or down and indicates the POC of that congestion box. The indicator is working in real time, but does not paint the box until the breakout is confirmed (2bars). You can change the Box Color if you want to see all of the boxes forming. I find that distracting.

I downloaded the CongestionBox4RNT8 a few months ago and I like the indicator, but there were a few annoying problems. This version fixes the problems that I found in my use.

Fixes:
1. The colors did not stick from startup to startup in the original version...
2. The original consumed a lot of resources, so I set a timer so that it only calculated the boxes during times that matter to the user. This cuts down on the calculations and memory use. You can set the start/stop time to what you want.

R1: Trader Contrax was having problems with autoscaling in his setup. He found what needed to be changed (Thx). Most people will not notice a difference so I edited the indie, left the name the same and just updated the file.

Several traders are having 'freezing' problems. This indie is a resource hog. You want to run as little history as possible with Congestion Box. One trick that I use is to have a transparent chart on the same panel as my main chart. Let's say you have a 5min chart. Add a second 5min chart to the same panel, transparent candles, wicks, etc, with 1 day history. The Congestion Box uses the 1 day chart as its input. You can have several instances of charts on the same panel.. A great NT attribute.

R2: Member jabeztrading, the original developer of the indicator, fixed the issue with the button recurring. This fix also fixed the resource problem. Excellent work!!!

Please let me know if you find any other issues.
Thanks
Bob

Here is the original description...Converted from the NT7 version. Originally design for range bars to box in those congestion areas produced by up and down bars that resulted from the market not going anywhere (it's not perfect).
But some folks had success using the indicator on minute charts.
The box is delayed and the red and green colors are even more delay but this was not meant to be a real time indicator.
 
Suggest other entries I might like
Details: CongestionBoxBC


December 31st, 2018
Size: 9.18 KB
Downloaded: 1115 times
Market Replay CL 01-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 01-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 01-19 (NT8)


December 20th, 2018
Size: 288.35 MB
Downloaded: 136 times
MaxStopFailsafe - Hidden Auto Stop 5 *
Guys I paid for this indicator to be developed.
It’s basically a hidden automatic “stop order”

I call it my failsafe loss limiter, as when trading using NT8 I have a bad habit of removing the visible stops on the chart at times to give a trade room to breathe and then every so often I end up getting run over by a sharp move and I wanted to prevent that from happening. Stop the bad habit so to speak. So i had this indicator developed which could run in the background.

Basically you attach it to your chart like any other indicator, set your amount of ticks stop loss in the settings and away you go. Then whenever you place a trade via NT8 chart trader and forget to use a stop, when your set level/amount of ticks against you is hit, you will be stopped out automatically.

Now, forewarning:
When I used the indicator it worked well but then there were a couple of issues:

1. At times, when say I had it set to 16 ticks stop loss and I wanted to change my mind and I changed the set level to say 12 ticks in the sttings, even though I changed it in the indicator settings, the original set level was filled, not the new level.

And,

2. When I remove the indicator from the chart, the auto stop would still function and I’d get filled even though I had removed It from the chart. It only removes from the chart when I removed the actual indicator from the ninjascriptor editor indicators list.

Both of the above shouldn’t happen.

I asked my programmer to look at this, but he couldn’t find anything wrong in the programming. So if any of you programmers on here would like to use the indicator and maybe give it a test and fix the above issues if you have them I think it would be helpful indicator for NT8 users.

I really liked using this indicator as it forces my own limits upon me and saves me from my own bad habits of moving / removing stops.

Although sometimes you do have to change the stop size due to changing market conditions/volatility.
 
Suggest other entries I might like
Details: MaxStopFailsafe - Hidden Auto Stop


December 11th, 2018
Size: 2.46 KB
Downloaded: 186 times

Keywords: loss stop
MaxStopFailsafe - Hidden Auto Stop
Theres no screenshot as its a hidden indicator.

Guys I paid for this indicator to be developed.
It’s basically a hidden automatic “stop order”

I call it my failsafe loss limiter, as when trading using NT8 I have a bad habit of removing the visible stops on the chart at times to give a trade room to breathe and then every so often I end up getting run over by a sharp move and I wanted to prevent that from happening. Stop the bad habit so to speak. So i had this indicator developed which could run in the background.

Basically you attach it to your chart like any other indicator, set your amount of ticks stop loss in the settings and away you go. Then whenever you place a trade via NT8 chart trader and forget to use a stop, when your set level/amount of ticks against you is hit, you will be stopped out automatically.

Now, forewarning:
When I used the indicator it worked well but then there were a couple of issues:

1. At times, when say I had it set to 16 ticks stop loss and I wanted to change my mind and I changed the set level to say 12 ticks in the sttings, even though I changed it in the indicator settings, the original set level was filled, not the new level.

And,

2. When I remove the indicator from the chart, the auto stop would still function and I’d get filled even though I had removed It from the chart. It only removes from the chart when I removed the actual indicator from the ninjascriptor editor indicators list.

Both of the above shouldn’t happen.

I asked my programmer to look at this, but he couldn’t find anything wrong in the programming. So feel free to use it and if any of you programmers on here could maybe give it a test and fix the above issues if you have them I think it would be helpful indicator for NT8 users.

I really liked using this indicator as it forces my own limits upon me and saves me from my own bad habits of moving / removing stops.

Although sometimes you do have to change the stop size due to changing market conditions/volatility.
 
Suggest other entries I might like
Details: MaxStopFailsafe - Hidden Auto Stop


December 11th, 2018
Size: 2.46 KB
Downloaded: 63 times

Keywords: loss stop
mkHarmonics_v1.1 5 *
This is just a quick fix to mkHarmonics to fix an XML save issue preventing the indicator from staying on a chart after exiting (but saving). It also was causing an error if you tried to save the settings presets.

I simply added [XmlIgnore()] and commented out [NinjaScriptProperty] for all the brush and font properties.

The original copyright is @mk77ch for the NT7 version. The NT8 conversion from: @psytopy.
 
Suggest other entries I might like
Details: mkHarmonics_v1.1


November 26th, 2018
Size: 16.80 KB
Downloaded: 769 times

Keywords: mkharmonics harmonics
Market Replay CL 12-18 (NT8)
NT 8 Market Replay data for CL

Contract: CL 12-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-18 (NT8)


November 16th, 2018
Size: 260.11 MB
Downloaded: 91 times
Skid Trender Version 1.2 5 *
So there was this indicator on ThinkorSwim I liked and I knew it was moving averages but it took me awhile to figure out. ( I'm not a programmer) Here is the xml so you can have it also. The reason I like it is because the two sets will gap apart when trending. For me, it gives me a clear picture. You must have EMASlopeColor for it to work found here.




Download file: Then place the file in File>Documents>Ninjatrader 8>Templates>Chart

This is Version 1.2
Because the first had the data series set to "Default 24 x 5". This causes tick chart candles to be
wrong. Special Thanks to @MiniP for pointing this out, and @bobwest for fixing it.
If you downloaded the first Skid Trender chart, change your settings in Data Series to "Use Instrument Settings"
this fixes the problem. Added Priceline to this .XML version.

Discussion and updates found here:



Enjoy

Skid
 
Suggest other entries I might like
Details: Skid Trender Version 1.2


November 10th, 2018
Size: 58.60 KB
Downloaded: 1284 times
Wolf range drawing tool 5 *
For my trading i make use of two different fib retracement templates.
One template with the 50% and 61.8% retracements, and a 2nd template with the wolf range to determine the market geometry. Although ninja supports templates for the fibonacci levels, this requires me to select the correct fib. level template every time i want to draw one of them.

To make live easier i made a copy of the fib. retracement drawing tool, modified it so it uses the the wolff range settings by default. That way i don't have to switch templates anymore and i can just select the normal fib tool for my 50%/61.8% retracements and the wolf range drawing tool for drawing a wolf range

Offcourse you also adjust it and use other retracement templates as you like.

5-11-2018 : version 1.0.0.0
 
Suggest other entries I might like
Details: Wolf range drawing tool


November 5th, 2018
Size: 6.67 KB
Downloaded: 450 times
RangeRider for NT8 V1.0 4 *
The general idea was to better clarify both entry and exit points.

So I created a combination Bollinger Bands and Pivot Points indicator, but utilizing the MIN and MAX functions in order to eliminate the smoothing that comes with Bollinger Bands. By doing so market fluctuations are (for me at least) more clearly defined.

Though I mostly use range bars other bar types also work well.

It is not unusual for me to "turn off" the bars themselves by making them transparent. Much less distracting clutter on the screen and I like things simple.

However, early on it is best to leave the bars visible in order to fully understand the various patterns created by the indicator. Whether in chop or a trending market certain patterns quite often become obvious. And those patterns repeat time and time again.
 
Suggest other entries I might like
Details: RangeRider for NT8 V1.0


November 4th, 2018
Size: 4.86 KB
Downloaded: 538 times

Keywords: min range mix
Market Replay CL 11-18 (NT8)
NT 8 Market Replay data for CL

Contract: CL 11-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant

only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 11-18 (NT8)


November 3rd, 2018
Size: 235.36 MB
Downloaded: 60 times
Risk / Reward drawing tool (updated) 5 *
Ninjatrader comes with a built-in risk/reward drawing tool.
However i like the one from tradingview much better
This drawing tool adds a tradingview look-a-like risk/reward tool to ninja trader for both long and short positions
When placing a R/R drawing tool on your chart you can move it around, drag the stoploss/target to its correct price levels and the risk/reward ratio will be updated in real time

After installing you can find the risk/reward tools under the drawing tools menu.
There's a long position tool and a short position drawing tool
Note you can assign keyboard shortcuts to the risk/reward drawing tools using the tools->Hot Keys menu.

3-11-2018 : version 1.0.0.0
5-11-2018 : version 1.0.0.1 bugfix to make it work with all instruments
 
Suggest other entries I might like
Details: Risk / Reward drawing tool (updated)


November 3rd, 2018
Size: 4.32 KB
Downloaded: 1399 times
Tradingview $TICK window 5 *
For my trading i make a lot of use of the $TICK. Sadly though.. ninja brokerage does not supply a really good $TICK index.
So until now i always had a web browser open showing tradingview's $TICK in the bottom left corner of my screen.
It worked.. but i had to open the web browser every trading session, scale it and move it to the correct location on my screen.

So to make life easier , i created this add on.
This add-on adds new menu item to New menu called $TICK.
When you selected it a new ninja trader window opens which shows the $TICK from tradingview.com.

Since it's a ninja window , its part of your workspace and ninja will automaticly open & position it the next time you startup ninja again.

Note.. by default you will see the light skin (white color) of trading view.
But since the $TICK window is just hosting IE as a webbrowser you can interact with, and login into tradingview right from the $TICK window it self. After logging in with your credentials you can right click on the chart to choose the dark skin as you see in the screenshot

1-nov-2018 : version 1.0.0.0
 
Suggest other entries I might like
Details: Tradingview $TICK window


November 1st, 2018
Size: 1.89 KB
Downloaded: 549 times
RulerV4 for Ninjatrader 8
Is there anyone that can code the Ninjatrader7 indicator named "RulerV4" by MBAgearhead. He did a fantastic job
and this indicator is invaluable. It is exactly what many of us were looking for. If you havent used it, everyone should
take a look. However, I am also transitioning to Ninjatrader 8 and would very much love it if someone could code that
indicator for Ninjatrader 8....that would be so awesome !!!
 
Suggest other entries I might like
Details: RulerV4 for Ninjatrader 8


October 31st, 2018
Size: 94.71 KB
Downloaded: 369 times
MACDBBLines (amaMACDBBLines) 5 *
Version 1.3 October 30, 2018

The MACDBBLines indicator is built from a standard MACD indicator with Bollinger Bands added to the signal line. The MACD values are shown as dots. This indicator is typically used to generate with-trend entries when the upper or lower Bollinger Band is violated.

Minor trend: The minorlower timeframe trend is up when the MACD is rising. It is down when the MACD is falling.

Major trend: The higher timeframe trend may be taken from the MACD itself. An major uptrend is signaled when MACD > 0, while MACD < 0 stands for a major downtrend.

Public Properties: The indicator comes with a few public Series<double> that can be accessed via other indicators or automated strategies. These will also be shown in the strategy builder. The series "Trend" may be used to detect the minor trend. "Trend" will show the value +2 when the MACD is rising and above the upper Bollinger Band, +1 when it is rising and below the upper Bollinger Band, -1 when it is falling and above the lower Bollinger Band, -2 when it is falling and below the lower Bollinger Band. You will further find two Series<double> "LongSignal" and "ShortSignal". "LongSignal" will return +2 for an upper band violation in a major uptrend (strong signal), +1 for an upper band violation in a major downtrend (weak signal) and 0 for no signal. Accordingly, "ShortSignal" will return +2 for a lower band violation in a major downtrend (strong signal), +1 for an lower band violation in a major uptrend (weak signal) and 0 for no signal.

Market Analyzer Column: The indicator comes with two separate market analyzer columns. The first column will simply indicate the trend and return values based on rising and falling MACD above or below the Bollinger Bands as described above. The second column will return entry signals, where +2 stand for a strong long signal, + 1 for a weak long signal, 0, for no signal, -1 for a weak short signal and - 2 for a strong short signal. For the market analyzer I have squeezed long and short signals into a single column, as there is little space on a market analyzer. For the Series<double> objects, I have separated the LongSignal and ShortSignal series, as they are designed to return positive values or 0 for no signal only. Please pay attention to the difference.

Paint Bars: The indicator comes with paint bars that reflect the minor trend. The colors are similar to the colors for the MACDBB dots, but you may differentiate between upcloses and downcloses.

Sound Alerts: The indicator comes with sound alerts that will be triggered when the upper or lower band is violated, or when the major trend changes.
 
Suggest other entries I might like
Details: MACDBBLines (amaMACDBBLines)


October 31st, 2018
Size: 14.91 KB
Downloaded: 1384 times

Keywords: bollinger macd macdbb macdbblines oscillator
Expected Rolling Volume 5 *
This indicator compares current rolling volume for a user selected time frame and compares it to an expected volume for a user selected time frame over a user selected n period in days.

The standard settings are set to 10 minute rolling and 10 minute expected with a 13 day lookback period. So, basically the bar plot shows the current continuous rolling 10 minute volume and compares it to the line plot that is an average of every 10 minute time slot over the last 13 days.

You also have and option to exclude user selected days from the lookback period.

I find this works well with range or tick bars, but also works with time based bars.

Uploaded using NinjaTrader 8.0.15.1 64-bit
 
Suggest other entries I might like
Details: Expected Rolling Volume


October 30th, 2018
Size: 6.39 KB
Downloaded: 226 times

Keywords: expected relative rolling volume
CSI V1 5 *
Apologies for this upload. I have found that there is something in the calculations that is incorrect, but haven't been able to track it down. It almost always says the current volume is more than the average, even when that seems unlikely or impossible.

I have uploaded a new indicator, RVOL (relative volume), that has accurate calculations in it, based on my manual gathering of values and performing the calculations. You can find it here:



If I figure out what's wrong with this one, I'll upload a repaired version. In the meantime, please use the RVOL indicator mentioned above.

Thank you!
*******************************
This indicator is inspired by Pete from JigSaw Trading. He likes to call it the Cumulative Sheep Index, but it actually compares volume on the current bar to the average volume for the same time of day, calculated over the last X number of days.

You can set the number of days and use it on bars of any duration. I have no idea what it will do with non-time-based bars, so be prepared for it to blow up, if you try that.

Please be aware that the smaller the bar duration and the larger the number of days being averaged, the longer it'll take to complete the plot. 1-min bars and 60 days, for example, take several minutes to complete.

There is an option to have some of its data sent to the Output Window, so you can assure yourself it's working, in case you choose bars and days that take a very long time to calculate.

Yours to download.

(In answer to the question posted in the 2nd 'thanks', yes. The values in the right column show the difference in volume between the current bar volume and the average volume for that bar for the previous X number of days.)
 
Suggest other entries I might like
Details: CSI V1


October 25th, 2018
Size: 3.46 KB
Downloaded: 308 times
Elliot Wave Drawing tool (Updated) 5 *
Custom drawing tool which allows you to draw Elliot Waves in NT 8
Supported waves are:
  • 12345
  • ABC
  • ABCDE
  • WXY
  • WXYXZ
For each wave you can select if you just want to see the labels, or also the wave lines itself and
the degree of the wave.

After installing you can find the elliot wave tools under the drawing tools menu.
Note you can assign keyboard shortcuts to any of the elliott drawing tools using the tools->Hot Keys menu.

28-10-2018: Updated.. fixed memory leak and some other small changes
 
Suggest other entries I might like
Details: Elliot Wave Drawing tool (Updated)


October 24th, 2018
Size: 4.12 KB
Downloaded: 818 times
Measured Move Drawing tool (Updated) 5 *
This is a simple custom drawing tool for drawing measured moves as described in Trading The Measured Move by David Halsley

The drawing tool allows you to simply draw the measured move from 0-> 100% -> 50% -> to -23.6%

After importing, you should see a new menu item 'measured move' in your drawing tools.
Select it, draw the 3 lines and voila ;-)

28-10-2018: fixed some small issues
 
Suggest other entries I might like
Details: Measured Move Drawing tool (Updated)


October 21st, 2018
Size: 7.26 KB
Downloaded: 829 times
agDELTAs visualization 2 - update 5 *
I forget to mention in agDELTAs visualization 2 post that I use different time frame
in input parameter for indicators

Usually it 3 times longer time compare to original (1 min chart - 3 min for indicators etc)

Its make indicators more smooth


See attached image
 
Suggest other entries I might like
Details: agDELTAs visualization 2 - update


October 9th, 2018
Size: 4.59 KB
Downloaded: 479 times
agDELTAs visualization 2 - how to use 5 *
Due on people interest to my agDELTA Visualization indicators I decided to publish some tips how to use it
In agDELTA - control points - cross above/below zero line and picks where indicator change direction
agDELTAmax and agDELTAmin - control points - picks and distance from ZERO line
Please see attached chart

For your convenience I attached indicators to this post


Best Regards


AG
 
Suggest other entries I might like
Details: agDELTAs visualization 2 - how to use


October 9th, 2018
Size: 4.59 KB
Downloaded: 333 times
agDELTAs visualization 4 *
This is a package of 3 Order Flows indicators - DELTA, DELTA MAX, and DELTA MIN
for Volumetric chart
Its help visualize who dominate the market and possible turning points
first indicator is a delta and just show
delta position per bar
Second - MAX DELTA
Third - MIN DELTA

To compare position of Delta Max to Delta Min you can see turning points or decrease/increase in move
(please be aware that Delta MIN is negative indicator and then it far from ZERO then negative force is more)

I use it with combination with other indicators to confirm turning point


Many Thanks to Ninja Trader Support Team !!!!!!

Best Regards
 
Suggest other entries I might like
Details: agDELTAs visualization


October 5th, 2018
Size: 4.59 KB
Downloaded: 443 times
Market Replay CL 10-18 (NT8)
NT 8 Market Replay data for CL

Contract: CL 10-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 10-18 (NT8)


September 29th, 2018
Size: 198.52 MB
Downloaded: 82 times
News indicator (Updated) 5 *
This indicator downloads news from forexfactory and display's it on your chart.
News is displayed in the upper left corner and is also shown as vertical lines on your chart.
You can choose if you want to show low, medium and/or high impact news
The time used is GMT. you can set a time offset in hours to adjust it to your own timezone
Furthermore you can ignore news for specific currencies (see the forex calendar). e.g. NZD will hide any NZD related news

30-10-2018: v1.1
- added option to hide the topleft table
- fixed bug that newsindicator disappeared after restarting ninja
 
Suggest other entries I might like
Details: News indicator (Updated)


September 28th, 2018
Size: 3.32 KB
Downloaded: 1042 times
Price line alert indicator 5 *
This indicator allows you to place price alerts in a very simple way.

- Add the indicator to your chart(s)
- Place one or more horizontal lines on your chart on the places where you would like an alert
E.g. near S&R levels or fib. levels
- Next when price crosses one of these lines you will get an audible alert

You can place as many lines as you like, and if you want to change one.. simply drag it up or down to its new price.
But please note.. it only works with a horizontal line, not with any other drawing element(s)

--- updated ---
Uploaded new version which source code.
 
Suggest other entries I might like
Details: Price line alert indicator


September 27th, 2018
Size: 2.38 KB
Downloaded: 721 times
Regression Channel (amaRegressionChannel) 5 *
Version 1.1 September 9, 2018

The Regression Channel already comes as a NinjaTrader default indicator. However, the NinjaTrader default indicator comes with a few limitations, which are adressed by this indicator:

- The default indicator calculates the regression channel from the last bar loaded by OnBarUpdate(). When the chart scrolled back horizontally, the regression channel remains in its future position until it drops out of the chart.
- The default indicator does not allow for calculating the linear regression channel a few bars ago and then project the channel lines forward until the current bar.

This version of the indicator has the two issues addressed:

- The regression channel is calculated from the last bar shown on the chart and will adapt its position accordingly when you scoll back the chart horizontally.
- You may enter an offset and calculate the regression channel a few bars ago. The regression channel will then be extended until the last bar shown on the chart.

Repainting behavior: All regression channels - whether linear or polynomial - belong to the class of repainting indicators. All regression channels are retrofitted to the selected lookback period. The repainting can be easily observed with this indicator when scrolling horizontally. The indicator comes with an option to display the regression bands. The regression bands show the trace that the regression channel has painted on the chart without repainting any prior bars.

Public DataSeries: The indicator comes with four additional public DataSeries that can be accessed via the strategy builder.

- Normalized slope - This is an output which returns the slope in synthetic degrees. The slope has been normalized by dividing it by the square root of the average true range and then applying the arctangent.
- NormalizedChannelWidth - This series returns the normalized channel width around the regression line and may be used as a measure of non-directional volatility.
- RegressionTrend - The regression trend holds the value + 1 for an upsloping regression line and -1 for a downsloping regression line.

Market Analyzer Columns: The indicator comes with three separately coded market analyer columns which allow for displaying normalized slope, normalized channel width and the regression trend on the market analyzer.
 
Suggest other entries I might like
EquitiesV1 5 *
This indicator is for equities traders, to compare current performance with the 'other 3' equities and an average of all 4.
It adds data series for ES, NQ, RTY and YM, shows % change for each since the session open (24 hr session, not just the day session) as well as a simple moving average of all 4. The SMA period is user-configurable. Default is 10.

Please note that the expiry date is one of the parameters. It's hard-coded with an 09-18 expiration, but you'll need to manually update that when you use the next contract date. (Or an earlier one)

I know I could have made the code extract the current expiry date, but the truth is I didn't feel like bothering working out that code again. (Did it for a previous indicator in NT7.)

I hope some of you find this indicator of use.

*** I finally updated the code for this indicator to pull that expiration date from the chart, so you don't have to input the date manually anymore.
Please find version 2 here:
 
Suggest other entries I might like
Details: EquitiesV1


August 27th, 2018
Size: 5.34 KB
Downloaded: 213 times
Market Replay CL 09-18 (NT8)
NT 8 Market Replay data for CL

Contract: CL 09-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 09-18 (NT8)


August 27th, 2018
Size: 210.80 MB
Downloaded: 71 times
Double Smoothed Stochastics (amaDSSBressert) 5 *
Version 1.0 August 14, 2018

The Double Smoothed Stochastics by Walter Bressert came after William Blau presented his version of the Double Smoothed Stochastics in 1991. Both indicators are widespread in the trading community, but they use different algorithms. While William Blau applied separate smoothing to numerator and denominator, Walter Bressert simply applied the Stochastics %K line to itself. Applying the Stochastics twice leads to an acceleration of the running pattern. Furthermore the Double Stochastics is smoother when compared to the classic Stochastics and generates signals more frequently.

The Double Stochastics by Walter Bressert ships with NinjaTrader as in-built indicator. This version of the Stochastics adresses a few issues of the NinjaTrader default indicator:

- The default indicator has preset the %K line smoothing to 3, value which cannot be changed.
- The default indicator does not have a signal line.
- The default indicator can only be applied to price, but cannot be applied to other indicators.

This version allows for setting the smoothing period for the %K line, comes with a signal line and maybe applied to other indicators as input series.
 
Suggest other entries I might like
Details: Double Smoothed Stochastics (amaDSSBressert)


August 24th, 2018
Size: 7.10 KB
Downloaded: 562 times

Keywords: doublestochastics exponential oscillator overbought oversold stochastics
Better Volume (amaBetterVolume) 5 *
Version 1.1 September 12, 2018

This indicator is based on the original version of the Better Volume Indicator from https://www.emini-watch.com/. It identifies the following events relative to the selected lookback period:

Breakout or climax bars: A breakout or climax bar is a wide range high volume bar for which the the product "volume times range" is higher than for all preceeding bars of the lookback period.

Churn bars: A churn bar is a narrow range high volume bar for which the ratio "volume per range" is higher than for all preceeding bars of the lookback period.

Climax churn bars: A climax churn bar is a high volume bar that qualifies both as a climax bar and as a churn bar.

Low volume bars: A low volume bar is a bar which has a lower volume than for all preceeding bars of the lookback period.

The indicator uses two lookback periods. The larger lookback period identifies stronger climax and churn bars, the smaller lookback period points to weaker climax and churn bars and is used to identify low volume bars.

A breakout or climax bar may occur at different locations. It may start a trend as a breakout bar, it may indicate that an existing trend continues after price has consolidated or it may occur at the end of a trend and indicate that the trend is near exhaustion. This bar type is similar to classic types of gaps that may be found on daily charts. There are runaway gaps, continuation gaps and exhaustion gaps. Breakout or climax bars may be used as a subsitute for those gaps when trading smaller timeframes.

Relative Volume: When you use the BetterVolume indicator with intraday data, it is pretty much distorted at the beginning of the regular session. When compared to pre-session bars, all the bars in the beginning of the regular session look like high volume bars, which in turn leads to false signals. This behavior is corrected when the Better Volume indicator is applied to "relative volume" instead of "absolute volume". This version of the indicator allows for performing the Better Volume calculations on both absolute volume and relative volume.

Sound Alerts: The indicator comes with sound alerts.

Market Analyzer Column: I have included a market analyzer column with the install file. The market analyzer column will return bar codes for each type of signal: strong climax churn bar = 0, strong climax bar = 1, strong churn bar = 2, weak climax churn bar = 3, weak climax bar = 4, weak churn bar = 5, low volume bar = 6, upclose no signal bar = 7, downclose no signal bar = 8, doji no signal bar = 9. Based on these values you may define cell conditions and show the signals as text with background color on the market analyzer.

Update version 1.1: Bug removed. Sound alerts did not fire, because the path for the sound files had not been initialized.

Update version 1.3:: Holiday calendar updated for Relative Volume indicator, sound alerts now working on inactive charts.

Nota: The forum software has renamed the downloadable zip file to the false version number 1.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.
 
Suggest other entries I might like
Details: Better Volume (amaBetterVolume)


August 22nd, 2018
Size: 26.72 KB
Downloaded: 1481 times

Keywords: bettervolume churn climax climaxchurn volume vsa
PriceLineV1 5 *
This indicator merely draws a horizontal line at the current price, updating as price changes.

I find it kinda handy for noting when price is approaching previous turning points without drawing S/R lines all over the place.

NOTE:
Version 8.0.15.1 of Ninjatrader includes an indicator they cleverly called PriceLine. It will break this indicator, but provides the same functionality as this plus can show a Bid and an Ask line. rendering this indicator obsolete.
(10/4/18)
 
Suggest other entries I might like
Details: PriceLineV1


August 15th, 2018
Size: 1.42 KB
Downloaded: 384 times
BarsInARowV1 5 *
As requested, this indicator has been updated for NT8.

It merely counts the number of rising and falling bars that occur in succession, resetting the number every time a bar either goes the other way or closes at the same value as it opens.

This also includes an SMA of both rising and falling bars with a user-configurable SMA period.

Hope you find some use for it.
 
Suggest other entries I might like
Details: BarsInARowV1


August 15th, 2018
Size: 3.33 KB
Downloaded: 354 times
Market Replay CL 08-18 (NT8) 4 *
NT 8 Market Replay data for CL

Contract: CL 08-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 08-18 (NT8)


July 25th, 2018
Size: 242.10 MB
Downloaded: 82 times
Market Replay CL 07-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 07-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 07-18 (NT8)


July 22nd, 2018
Size: 220.04 MB
Downloaded: 74 times
Multiple Selections for Candlestick Patterns NT8 5 *
Version 1.0
Exported from NT 8.0.14.1 64 Bit

This is a modification to the existing candlestick pattern indicator included with NT 8. Their version only allows for selecting one pattern at a time. This version allows you to select all or each one individually. Otherwise it operates the same as the old version.

To allow each type to be selected, uncheck the box that says "Find_All" then check the boxes you want the indicator to find.

If you leave the check box "Find_All" checked it will find all regardless of how you have the others set.

I have a decent computer and I notice a little lag when "Find_All" is selected. Use with caution.
 
Suggest other entries I might like
Details: Multiple Selections for Candlestick Patterns NT8


July 19th, 2018
Size: 11.81 KB
Downloaded: 723 times

Keywords: candlestick pattern
Bar Timer Located At The Bar 5 *
Version 1.0
Exported from NinjaTrader 8.0.14.1

Modified the existing bar timer to move the time remaining next to the current bar.

If the time left is less than 1 hour it will only display minutes and seconds otherwise it will display hours, minutes and seconds remaining.
 
Suggest other entries I might like
Details: Bar Timer Located At The Bar


July 16th, 2018
Size: 2.49 KB
Downloaded: 747 times

Keywords: bartimer timer
Tick Counter Located At The Current Bar 4 *
Version: 1.0
Exported with NinjaTrader 8.0.14.1 64 bit.

Simple Tick Counter modification to the one included with NinjaTrader 8 that replaces the one located at the bottom right of the screen and places it next to the current bar.

The size of the text is determined by the font size you have set for the chart. The color is also automatically set based on the text color settings you have set for that chart.

This is my first indicator modification, please let me know if you have issues importing.
 
Suggest other entries I might like
Details: Tick Counter Located At The Current Bar


July 14th, 2018
Size: 139.65 KB
Downloaded: 504 times

Keywords: counter tick
Tick Counter Located At The Current Bar 5 *
Version: 1.0
Exported with NinjaTrader 8.0.14.1 64 bit.

Simple Tick Counter modification to the one included with NinjaTrader 8 that replaces the one located at the bottom right of the screen and places it next to the current bar.

The size of the text is determined by the font size you have set for the chart. The color is also automatically set based on the text color settings you have set for that chart.

This is my first indicator modification, please let me know if you have issues importing.
 
Suggest other entries I might like
Details: Tick Counter Located At The Current Bar


July 14th, 2018
Size: 139.65 KB
Downloaded: 139 times

Keywords: counter tick
CenTexFishTDiv 5 *
This indicator gives a choice for drawing the divergence lines for FisherTransform and also for the MacDhistograhm.

I want to give all the credit to Cory who made it possible for the FisherTransform to have the divergence lines work in this indicator. I added the ability for the indicator to count how many times divergence's occur because its handy sometimes to see how different time periods affect divergence.

Quantismo
 
Suggest other entries I might like
Details: CenTexFishTDiv


July 10th, 2018
Size: 13.45 KB
Downloaded: 500 times
TimeSlot 5 *
Hello Traders, there are several reasons to mark certain times. Perhaps you like to mark the 30 and 60 minute time slots, the open of the market, the volatility slots or news releases. This indicator will paint from your start time to your end time.
You can have several instances with different times and different colors and opacity.

I have used this indicator through several instances of NT 8 and several bar types with no issues. This was compiled on NT8 V 14.2

Let me know how you are using it.

Trade Well...
Bob
 
Suggest other entries I might like
Details: TimeSlot


July 4th, 2018
Size: 2.39 KB
Downloaded: 590 times
ATRback 5 *
Hello Traders, there are certain time slots during the day where the volatility increases. This could be due to news releases at certain times or institutional adjustments after the 'morning meetings'. This indicator is a modification of the ATR indicator that makes the average of the ATR 1 (range of one candle) and allows you to set how many candles back to evaluate. For simplicity the candles in the pic are set to 60minutes and the 4 instances of ATRback are set to look back 23, 46, 69, and 92 candles ( 1,2,3,4 trade days back) so you can spot the time slots where the range of the 1 hour candles tend to increase. Another application might be to set the lookback in intervals of a week, so you would be looking at that day of the week 1,2,3,4,weeks back.

This indicator has worked on several instances of NT 8 and several bar types. It was exported using NT8 v14.2

Let me know how it works for you...

Trade Well...
Bob
 
Suggest other entries I might like
Details: ATRback


July 4th, 2018
Size: 1.81 KB
Downloaded: 183 times
Volume - Colored Based on Volume
Volume - Colored Based on Volume

A Volume bar is colored the Volume Subgraph Primary color if its volume is higher or equal to the previous bar volume.
A Volume bar is colored the Volume Subgraph Secondary color if its volume is lower than the previous bar volume.

thanks to NinjaTrader_PatrickH
 
Suggest other entries I might like
Details: Volume - Colored Based on Volume


June 22nd, 2018
Size: 1.50 KB
Downloaded: 354 times
Connors RSI (amaConnorsRSI) 5 *
Version 1.0 March 6, 2017

Created by Larry Connors, this indicator is a composite of three separate components. Two of the three components utilize the Relative Strength Index (RSI) calculations developed by Welles Wilder in the 1970’s, and the third component ranks the most recent price change on a scale of 0 to 100.

In effect, the three components combine to form a momentum oscillator. The output value between 0 and 100 then identifies short-term overbought and oversold conditions.
 
Suggest other entries I might like
Details: Connors RSI (amaConnorsRSI)


June 21st, 2018
Size: 7.06 KB
Downloaded: 466 times

Keywords: momentum oscillator rsi connors
BarTimerPro 2 *
June 20th 2018 v1.0
This Indicator displays the duration of the current bar. Tested and works on time, tick , volume and range bars.

- Font Color
- Font Select
- Show Bar Timer Label
- Hide Indicator Name
- Show all tabs

I'm self taught and just starting to understand what's required to convert my NT7 indicators over to NT8 so let me know if this can be improved.
 
Suggest other entries I might like
Details: BarTimerPro


June 20th, 2018
Size: 3.59 KB
Downloaded: 444 times
Market Replay CL 06-18 (NT8)
NT 8 Market Replay data for CL

Contract: CL 06-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 06-18 (NT8)


June 13th, 2018
Size: 277.63 MB
Downloaded: 88 times
Market Replay CL 05-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 05-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 05-18 (NT8)


June 1st, 2018
Size: 290.24 MB
Downloaded: 100 times
TradeTimerPro - NT8 5 *
May 31st 2018 v1.0
This Indicator displays the time elapsed since last execution. Tested and works although I am still on NT7 so any feedback welcome.

- Font Color
- Font Select
- Show Trade Timer Label
- Hide Indicator Name
- Show all tabs

I'm self taught and just starting to understand what's required to convert my NT7 indicators over to NT8 so let me know if this can be improved.
 
Suggest other entries I might like
Details: TradeTimerPro - NT8


May 31st, 2018
Size: 3.94 KB
Downloaded: 360 times
Z-score (amaZScore) 5 *
Version 1.3 September 25, 2017

The Z-score or standard score is a numerical measurement of a value’s relationship to the arithemic mean of the data set. The Z-score is the signed number of standard deviations by which the current value of a data point is above the mean value or below the mean value as calculated for the selected lookback period.

For a normally distributed sample 95.8% of the z-scores of all data points fall within the range [-2, +2]. A Z-score of 0 indicates that the data point is identical with the arithmetic mean of the data set.

The Z-score is a normalized oscillator that can be used to identify extreme readings of the input series. The Z-score is calculated by dividing the absolute difference between a data point and the arithmetic mean by the standard deviation.

One of the main applications of the Z-score is that it can be used to normalize any oscillator. For example, the MACD is a non-normalized oscillator which does not pass the c-test introduced by William Eckhardt. However, when the Z-score is used to normalize the MACD, the resulting oscillator uses a normalized scale and will pass the c-test. The normalized MACD is obtained, when the MACD is used as the input series for the Z-score.
 
Suggest other entries I might like
Details: Z-score (amaZScore)


May 9th, 2018
Size: 2.54 KB
Downloaded: 602 times

Keywords: normalized oscillator standarddeviation volatility zscore
BetterBrick ChartStyle 5 *
This is the NinjaTrader 8 version of the BetterBrick ChartStyle, which is especially useful in conjunction with the BetterRenko Bar Type.

You can find the discussion thread here:

History:
v1 20100807 - @Aslan created to go with BetterRenko
v2 20100812- @Aslan changed to paint OHLC bar for live bar
v2 20150719 - @Dalebru converted to NT8. Exported with NinjaTrader 8.0.0.5
v2 20170102 = @shanmugs added missing "Open" line
v2 20180306 - @DaleBru changed ChartStyleType enum value that conflicted with recent NT8 update
v2 20180409 - @DaleBru exported with NinjaTrader 8.0.12.0
 
Suggest other entries I might like
Details: BetterBrick ChartStyle


April 9th, 2018
Size: 2.25 KB
Downloaded: 836 times

Keywords: betterbrick betterrenko chartstyle renko
Market Replay CL 04-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 04-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 04-18 (NT8)


March 18th, 2018
Size: 247.83 MB
Downloaded: 120 times
BVA Version 2 5 *
BVA Version 2 (Bar Volume Accumulation), is for spotting Divergences in Volume and Price Action.

Example:
Higher High with less BVA, upward trend is loosing momentum.
Lower Low with less BVA, downward trend is loosing momentum.

Version 2 has current and historical values included for use in back testing and strategies. The rest of the code is the same as Version 1 that's posted in the Elite Download Section.


Note:
The plot values for testing have been set to transparent. If you want to see them on your chart, you must select a color for each plot.

Compiled using NT 8.0.12.0 64-bit (Multi-Broker)
 
Suggest other entries I might like
Details: BVA Version 2


March 5th, 2018
Size: 4.87 KB
Downloaded: 1037 times
Market Replay CL 03-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 03-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation

of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 03-18 (NT8)


February 24th, 2018
Size: 256.02 MB
Downloaded: 107 times
SigmaSpikes 5 *
Here is an NT8 "SigmaSpikes" as described by Adam during the webinar.

His blog shows the formula's:
https://adamhgrimes.com/how-to-calculate-sigmaspikes/

Here is Adam Grimes' Webinar that discusses their use:
 
Suggest other entries I might like
Details: SigmaSpikes


February 15th, 2018
Size: 3.34 KB
Downloaded: 409 times

Keywords: adam grimes sigmaspikes sigma spikes
Chart ScreenShot to the Em@il indicator
Takes a screenshot of the chart and sends to email in PNG format.
From NinjaScript Editor set up the private email parameters then right click and compile.

https://ninjatrader.com/support/forum/showthread.php?t=45339

Take screenshot at the end of session or last bar on chart.

Thanks to the original creator marty087 from Ninjatrader forum.
Useful for autostrategies.
 
Suggest other entries I might like
Details: Chart ScreenShot to the Em@il indicator


February 1st, 2018
Size: 2.03 KB
Downloaded: 172 times
Multi Reverse EMA (REMA) 5 *
Exported with 8.0.12.0 64-bit

Minor Update -- Remove Print statement as noted by bobc635, thanks 2/2/2018

This is the NT8 version of NT7 MultiREMA which is described in full in the NT7 section here. There are no additional features or enhancements.

The indicator will be installed in a folder "Cheech". The REMA indicator will be installed in the Indicator folder.

Note: The default alpha setting for the Trend Plot is set to 0.1 to match the REMA setting as supplied by Ninjatrader. The default setting for the NT7 version for the same plot is 0.05 as was indicated in the article. Adjust accordingly.

















Change Log
Date --------- Description
1/31/2018 --- Initial Release
2/2/2018 --- Removed Debug Print statement
 
Suggest other entries I might like
Details: Multi Reverse EMA (REMA)


January 31st, 2018
Size: 5.06 KB
Downloaded: 522 times

Keywords: ehlers multirema rema
Market Replay CL 02-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 02-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a

folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 02-18 (NT8)


January 27th, 2018
Size: 190.73 MB
Downloaded: 105 times
PriceLineWH-NT8 4 *
Horizontal Line at Current Price.
Converted from NT7 ver 2.2 04/04/2011 photog53
 
Suggest other entries I might like
Details: PriceLineWH-NT8


January 26th, 2018
Size: 2.03 KB
Downloaded: 491 times
DayOftheWeek-NT8 4 *
Plot the day of the week into the chart.
Fixed issues regarding the indicator name. Renamed. Thanks to "Fat Tails" for the advise ...
 
Suggest other entries I might like
Details: DayOftheWeek-NT8


January 26th, 2018
Size: 1.57 KB
Downloaded: 660 times
Advanced Risk Reward Indicator Download Entry By bassam posted by NinjaTrader_Jim on Ninja Trader Support Forum 5 *
Exported using NT 8.0.9.0

Description
This is a port of the NinjaTrader 7 AdvancedRiskReward.v3 indicator by bassam. The original indicator can be found here.

Quote:
This indicator helps you define your entry, stop and target (1 or 3) visually on the chart with the help of horizontal lines, calculates your potential P/L ,unrealized P/L,Risk/Reward ratio and contracts sizing per account size.

Once started click on the chart 3 times there where you think your values will be appropriate , then shift the lines as needed and save the changes.

- Defines your Risk/Reward ratio using 1 or 3 targets
- Save & reload your values,be it minute,daily or weekly chart (One set of values per instrument)
- Interactive Mode: per-tick P/L based on the chosen contracts size
- Interactive Mode-Attached: per tick potential P/L
- Non-Interactive : Contract sizing is based on the defined risk per account size
- Hide/show the indicator as required & show/hide on start-up
- Extended or short lines
To Import
1. Download the attached file to your desktop
2. From the Control Center window select the menu Tools > Import > NinjaScript Add On.

Category Version 8 Indicators
 
Suggest other entries I might like
mahToolBar By Aligator 5 *
"Indicator by : Aligator
/// Revision 0 - April 4, 2017
/// Revised April 16, 2017 by Woody Fox too include all Drawing Tools and Chart Markers
/*
The mahToolBar indicator installs drawing object icons in the NinjaTrader Main Toolbar
for a one-click drawing.

This is a compilation of ideas and scripts from several people on this froum Including ChelseaB, Jessie, shuglu,
and AlanP - Thank you all.

The toolbar is a selection of draw objects placed in the chart main tool bar to save chart space. Other available
toolbar shortcut indicators around all plot inside the main chart area, and that seems to be a waste of the chart area.

I have included my favorites and the most frequently used draw objects by chart analysts. One can
certainly add, with minimal effort, as many objects from the draw object dictionary as one wishes.

Individual draw objects can be selected and the user can choose any or all objects to include in
the toolbar. Two icons (or objects) are very handy for changing the width of the bars by simply
clicking on the icons.

The script can use some cleaning for more efficiency. Until someone comes up with a prettier and more efficient
toolbar this one works great for me all day drawing lines, channels, fibs, etc.

Exported: NinjaTrader 8.0.5.2"
 
Suggest other entries I might like
Details: mahToolBar By Aligator


January 13th, 2018
Size: 6.92 KB
Downloaded: 449 times
Multiple Moving Average Crosses (amaMultiMACross) 5 *
Version 2.2 March 8, 2020

The Multiple MA Cross indicator plots a fast and a slow moving average and colors the area between the two moving averages. Both the fast and the slow moving average may be selected from a collection of over 30 different moving averages.

The indicator is primarily designed as a trend filter to show whether the market is in an uptrend or in a downtrend. The indicator comes with two different trend definitions - cross and thrust. The trend is exposed as a double series and can be accessed via the NinjaTrader strategy builder or the market analyzer. Directly accessing the trend via the market analyzer requires a separately coded market analyzer column, which is not yet included with the install file.

Trend definition "MA Cross": The current trend changes to "uptrend" when the fast moving average crosses the slow moving average from below. The current trend changes to "downtrend" when the fast moving average crosses the slow moving average from above.

Trend definition "Thrust": The current trend changes from “downtrend” to “uptrend” with the first bullish thrust bar that plots above the upper moving average. A bullish thrust bar is a bar that closes above the prior bar’s high and has a larger range than the prior bar. The current trend changes from “uptrend” to “downtrend” with the first bearish thrust bar that plots below the lower moving average. A bearish thrust bar is a bar that closes below the prior bar’s low and has a larger range than the prior bar.

Moving averages available as fast and slow moving average:

- Adaptive Laguerre Filter
- ADXVMA
- Butterworth Filter
- DEMA
- Distant Coefficient Filter
- Double Weighted Moving Average (DWMA)
- Exponential Hull Moving Average (EHMA)
- EMA
- Gaussian Filter
- HMA
- Holt EMA
- Laguerre Filter
- LinReg
- Moving Mean TPO
- Moving Mean VWTPO
- Moving Median
- Moving Median TPO
- Moving Median VWTPO
- Range Weighted Moving Average (RWMA)
- Sine Weighted Moving Average (SWMA)
- SMA
- SuperSmoother
- TEMA
- Tillson T3
- TMA
- Triple Weighted Moving Average (TWMA)
- VWMA
- Wilder's Average
- WMA
- ZerolagHATEMA
- ZerolagTEMA
- ZLEMA

Applying the Multi MA Cross to indicators: The Multi MA Cross is designed to be applied to other indicators which may be selected as input series. However, some of the moving averages listed above will not support this feature. In case that a selected moving average does not support the feature the indicator will display an error message asking you to select a different moving average for the fast or the slow moving average. These are the moving averages that may not be selected when an indicator is chosen as input series: Mean TPO, Mean VWTPO, Median TPO, Median VWTPO, RWMA, VWMA, ZerolagHATEMA. These moving averages may only be applied to price.

Paint Bars: The MultipleMA Cross indicator comes with paint bars. The paint bars are colored according to the trend, where the trend maybe determined via the "MA Cross" or the "Thrust" option. The paint bars may be displayed without the indicator plots.
 
Suggest other entries I might like
Details: Multiple Moving Average Crosses (amaMultiMACross)


January 8th, 2018
Size: 87.10 KB
Downloaded: 2469 times

Keywords: cross median movingaverage slingshot trend trendfilter
BzvVerticalLineAtTime Indicator NT8. Vertical Lines at times 4 *
Plots a vertical line at a specified time. BzvVerticalLineAtTime Indicator converted from NT7 to NT8.

Note (bug): For some reason when the time is changed into the indicator set up still allways the default time.
Code should be reviewed. Now the time only can be changed into the code. Help if anybody knows how fix it.


Fixed issue. New Version from Ninjatrader indicators Forum

https://ninjatrader.com/support/forum/local_links.php?s=&catid=7&filter=&sort=N&page=1&pp=15&keyid=265
 
Suggest other entries I might like
Details: BzvVerticalLineAtTime Indicator NT8. Vertical Lines at times


January 2nd, 2018
Size: 3.19 KB
Downloaded: 309 times
Trends by TMFT multiple MAs converted to NT8 V1 5 *
Chart will draw up to 3 MAs with selection of 7 diff MA to choose from. Note that you can modify the code to add more MAs if you have them. I have to comment out some of them as they are not converted to NT8 yet.
Export with 8.0.2.0
 
Suggest other entries I might like
Details: Trends by TMFT multiple MAs converted to NT8 V1


December 30th, 2017
Size: 17.87 KB
Downloaded: 1010 times

Keywords: ma multiple trend
Delta Bars (NT8) 5 *
This is a custom bar type which is based on the Bid Ask Delta (Ask Volume - Bid Volume).
A new bar is created when the Delta is greater than a given Threshold-Value defined in the Data Series Properties.

The archive also contains a custom Delta indicator specially coded to work with this bar type.

Updates:
- Added a cumulative Delta Mode
 
Suggest other entries I might like
Details: Delta Bars (NT8)


December 27th, 2017
Size: 4.74 KB
Downloaded: 2182 times

Keywords: ask bars bartype bid delta
Elder's Smoothed ROC 5 *
The ROC Smoothed indicator is a modification of the ROC, as described in Alexander Elder's book Trading for a Living. It plots two lines: ROC, which is the difference between the current price and the price x-time periods ago, and SROC which is the difference between an MA of price and the MA of price x-time periods ago.

This oscillator avoids the major flaw of ROC. Smoothed Rate of Change compares the values of an exponential moving average instead of prices at two points in time. It gives fewer trading signals, and the quality of these signals is better.






Excerpt from the book "Trading for a Living"
To create S-ROC you must first calculate an exponential moving average of closing prices. The next step is to apply Rate of Change to the EMA. S-ROC is not very sensitive to the length of its EMA or ROC parts. You can calculate a 13-day EMA of closing prices and then apply a 21-day Rate of Change to it. Some traders calculate the Rate of Change of prices first and then smooth it with a moving average. Their method produces a much jumpier indicator, which is less useful than S-ROC.

Crowd Behavior:
An exponential moving average reflects the average consensus of value of all market participants during the period of its window. It is like a composite photograph that reflects major features of the market crowd rather than its fleeting moods. S-ROC compares each reading of an EMA to a past reading from your selected period of time.
It compares the average mass consensus today to the average consensus in the past. S-ROC tracks major shifts in the bullishness and bearishness of the market crowd.

Trading Rules:
Changes in the direction of S-ROC often identify important market turns.
Upturns of S-ROC mark significant bottoms, and its downturns mark important tops.
Divergences between S-ROC and prices give especially strong buy and sell signals.

1. Buy when S-ROC turns up from below its centerline.
2. Sell when S-ROC stops rising and turns down. Sell short when S-ROC turns down from above its centerline.
3. If prices reach a new high but S-ROC traces a lower peak, it shows that the market crowd is less enthusiastic even though prices are higher. A bearish divergence between S-ROC and price gives a strong signal to sell short.
4. If prices fall to a new low but S-ROC traces a higher bottom, it shows that the market crowd is less fearful, even though prices are lower. It shows that the downside pressure has lessened, even though the market has fallen deeper than before. A bullish divergence gives a strong signal to cover shorts and buy.
 
Suggest other entries I might like
Details: Elder's Smoothed ROC


December 21st, 2017
Size: 15.00 KB
Downloaded: 443 times
Market Replay CL 01-18 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 01-18



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 01-18 (NT8)


December 16th, 2017
Size: 215.78 MB
Downloaded: 111 times
VixRSI - The Fear Indicator 5 *
The VixRSI which was presented in the January 2014 issue of the TASC magazine.

Several years ago, Larry Williams developed something he calls the VIX fix. What he developed was a simple calculation that closely emulates the performance of the original VIX using only price data, and which can therefore be applied to any tradable. In a nutshell, we take the highest close over the last 22 trading days, subtract today’s low price, and then divide the result by the highest close over the last 22 trading days.
https://www.marketcalls.in/wp-content/uploads/2014/12/VIXFix.pdf

Combining the VixFix with the RSI makes it even more powerful to detect Instrument bottoms and oversold areas. Detecting overbought VIX “greed areas” can also be useful if you try to catch a fast and profitable long trade on the VIX itself.

The calculation is simple:
VixRSI = ema3 of VixFix / ema3 of 14-day RSI
 
Suggest other entries I might like
Details: VixRSI - The Fear Indicator


December 9th, 2017
Size: 7.74 KB
Downloaded: 866 times
Market Replay CL 12-17 (NT8)
NT 8 Market Replay data for CL

Contract: CL 12-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation

of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 12-17 (NT8)


December 3rd, 2017
Size: 220.92 MB
Downloaded: 85 times
MiniChart (NT8) 5 *
As i am often trading from a laptop, i always wished to have some kind of a small chart in my actual trading chart to keep track of other instruments or a smaller tick or range chart of the same instrument.

This is pretty much what this rather simple indicator does.
I am fully aware that there are at least one thousand things that could be added to this indicator but as usual, it is what it is. You are free to use and edit the code but i am not gonna implement anything else as this is exactly what i need for my personal trading.

The indicator draws a rectangle to display the mini chart, which can be dragged and resized as every other rectangle in NT8.

the archive also includes a custom range bar type without gaps.

Cheers,
Mike


Updates:
- Value Area Zones added
- ChartTrader Orders are now visible
- Different ChartStyles are now available
- Added a few more indicators
- Code optimizations
- Display orders optimized
- MiniChart is now visible when markets are closed.
- Heiken Ashi added for Tick, Volume, Minute and Second Charts


The indicator is listed under an own folder: /Infinity/MiniChart
 
Suggest other entries I might like
Details: MiniChart (NT8)


December 1st, 2017
Size: 25.85 KB
Downloaded: 2218 times

Keywords: chart mini minichart
Multiple Keltner Channels (amaMultiKeltner) 5 *
Version 1.6 November 25, 2017

The Multiple Keltner Channels are a generalized version of the Keltner Channels.

Standard Keltner channels are built from a simple moving average (SMA) and two channels lines above and below. The two lines above and below are drawn at a distance from the center line, a distance which is a multiple of the simple moving average of the ranges of the past N bars.

The generalized concept has the SMA replaced with any of 30 moving averages. The volatility measure used to calculate the distance of upper and lower line from the center line can be derived from an average range (AR) or average true range (ATR). You may select different lookback periods for the moving average that serves as the center line and the moving average which is applied to the range or true range.

The Multiple Keltner Channels come with an additional smoothing option for center line and channel lines. The additional smoothing is obtained by further smoothing all plots with a 3-period simple moving average (SMA).



Moving averages available for calculating the center line:

- Adaptive Laguerre Filter
- ADXVMA
- Butterworth Filter
- DEMA
- Distant Coefficient Filter
- Double Weighted Moving Average (DWMA)
- Exponential Hull Moving Average (EHMA)
- EMA
- Gaussian Filter
- HMA
- Holt EMA
- Laguerre Filter
- LinReg
- Moving Mean TPO
- Moving Median
- Moving Median TPO
- Range Weighted Moving Average (RWMA)
- Sine Weighted Moving Average (SWMA)
- SMA
- SuperSmoother
- TEMA
- Tillson T3
- TMA
- Triple Weighted Moving Average (TWMA)
- Wilder's Average
- WMA
- ZerolagHATEMA
- ZerolagTEMA
- ZLEMA

Moving averages colored according to slope: You may also use this indicator to display any of the above listed moving averages and color them according to slope. The slope is not based on a geometrical concept, as this would not be compatible with the scalability of modern charting applications. The indicator adjusts slope to bar volatility such that the indicator may be used across all instruments and bar types with the same settings. The slope is shown as upsloping, downsloping or flat. The degree of flatness which is still considered as being flat may be adjusted via the neutral threshold parameter. When you set that parameter to zero, the slope will not show any flat sections, but the moving average will always be identified as upsloping or downsloping. Channel lines may be unselected, if you just wish to display the selected moving average.

Volatility measures: The standard Keltner channel uses the range. This indicator also for substituting the range with the average true range. The average true range is used as default option to facilitate the application of the Multiple Keltner Channels to other indicators.

Applying the Multiple Keltner Channels to indicators: When an indicator is used as input series, the range will always return the value 0. However, the average true range will return the absolute amount of the difference of two neighbouring data points of the selected input series. Therefore the indicator may only be applied to other indicators, as long as the offset formula is set to "True_Range".

Paint Bars: The Multiple Keltner Channel indicator comes with paint bars. The paint bars are colored according to the slope of the center line. The paint bars may be displayed without the indicator plots. The colors of the paint bar will then show the slope of the moving average selected as center line.

Sound Alerts: In case that the sound alerts are active, the indicator will alert you when the trend derived from the slope of the center line changes. Currently, there are no sound files included with the zip file, but it is easy to create them and copy them to the NinjaTrader sounds directory.
 
Suggest other entries I might like
Details: Multiple Keltner Channels (amaMultiKeltner)


November 25th, 2017
Size: 81.22 KB
Downloaded: 1289 times

Keywords: channel keltner keltnerchannel movingaverage range slope truerange volatility
Twiggs Money Flow 5 *
Colin Twiggs' Money Flow indicator is similar to the Chaikin Money Flow (CMF). Where Chaikin Money Flow uses CLV (Close Location Value) to evaluate volume (money flow) as bullish or as bearish, Twigs Money Flow, uses the TR (True Range). Twiggs Money Flow also relies on moving averages in its calculation while Chaikin uses cumulative volume.
 
Suggest other entries I might like
Details: Twiggs Money Flow


November 25th, 2017
Size: 3.44 KB
Downloaded: 488 times
Slow Relative Strength Index (amaSRSI) 5 *
Version 1.2 November 25, 2017

The Slow Relative Strength Index (SRSI) is an oscillator which was presented by Vitali Apirine in the April 2015 issue of Stocks & Commodities.

The SRSI is a momentum oscillator derived from the RSI developed by Welles Wilder in 1978. Where the RSI takes into account price moves relative to the prior bar's close, the SRSI compares the current price to an exponential moving average. The SRSI uses the same scale as the RSI. A value above 80 is considered as overbought, whereas a value below 20 indicates an oversold condition.

Compared to the RSI, the SRSI is supposed to generate stronger long term signals, but weaker short term signals. I have added a signal line to the indicator.

Nota: I saw that another version of the SRSI has already been posted. That version is not adapted to work with bar types that support RemoveLastBar() such as Renko bars or Linebreak bars.







Nota: There is another version of the SRSI posted, which will not work correctly with bar types that support RemoveLastBar().
 
Suggest other entries I might like
Details: Slow Relative Strength Index (amaSRSI)


November 25th, 2017
Size: 4.22 KB
Downloaded: 493 times

Keywords: oscillator rsi srsi wilder
Ehlers Quotient Transform - Early Trend Detection 5 *
The Quotient Transform which was presented in the August 2014 issue of the TASC magazine.

Ehlers Quotient Transform, which nonlinearly manipulates indicators to not only produce an early trend detection but also provides the ability to know how long to stick with the trend. A typical characteristic of the early-onset trend detector is that it remains above zero, indicating an uptrend, far too long after the uptrend is over. This characteristic can be mitigated by adding an additional indicator and rule set to exit a long trend trade. The early-onset trend indicator can be tuned at the trader’s preference by inputting a value for the low-pass period (LPPeriod) and the quotient parameter K.

The early-onset trend detector works in current market conditions because there is a decided upside bias to the market data. In fact, it is this upside bias that helps the nonlinear transfer response of the quotient transform work. In conditions where the market has a downside bias, negative values of K should be used in the quotient transform to take advantage of the bias in this direction.
 
Suggest other entries I might like
Details: Ehlers Quotient Transform - Early Trend Detection


November 25th, 2017
Size: 2.53 KB
Downloaded: 1213 times
Slow Relative Strength Index
The Slow Relative Strength Index (SRSI) is a price-following oscillator which was presented by Vitali Apirine in the April 2015 issue of the TASC magazine. It measures change in price movements relative to an exponential moving average (EMA). Like the relative strength index, it oscillates between zero and 100. SRSI is considered overbought when above 80 and oversold when below 20. SRSI can also generate signals by looking for divergences and centerline crossovers.

The SRSI is calculated using the following formula:
SRSI = 100 – [100/(1+SRS)]

SRS = Average positive difference/Average negative differencen

The SRSI measures the strength of a security relative to a sixday EMA. The closing price is used for this EMA. The difference is positive when the close is above the six-day EMA. Positive difference = [Close – Moving average]. Difference is negative when the close is below the six-day EMA. Negative difference = [Moving average – Close]. Negative difference values are expressed as positive values, not negative values. If the closing price equals the six-day EMA, then difference = 0 (no change). Smooth positive and negative difference values are based on Wilder’s smoothing technique.
 
Suggest other entries I might like
Details: Slow Relative Strength Index


November 24th, 2017
Size: 3.62 KB
Downloaded: 314 times
Wicks V1 5 *
It's common for people to look at how large the upper or lower 'wicks' or 'shadows' are in comparison to the range of a bar. In writing strategies that do so, I got tired of re-re-coding calculations to look for especially large ones.
So, I created an indicator that shows the upper and lower wick size as a percentage of the bar's range. So, now, if I want to specify a wick that's greater than 50% of the bar's range, I can just look for instances where the indicator values are UpperWick > 50 or LowerWick < -50.

If you find looking for negative numbers cumbersome, edit the indicator and reverse the LowerWick calculations, from either (Low[0] - Open[0]) or (Low[0] - Close[0]) to (Open[0] - Low[0]) or (Close[0] - Low[0]), respectively. Then, all the histogram bars will point upwards and you can make your code always look for positive values.

I hope some of you find this indicator handy.

Thanks go to jmont1, who graciously converted this indicator to NT8.
 
Suggest other entries I might like
Details: Wicks V1


November 16th, 2017
Size: 3.54 KB
Downloaded: 220 times
TickBarsReassembled V0.1 5 *
This is a first test of a TickBarChart style that will reassemble ticks at the same time and price into a single tick. This is really the same order but split up so it doesn't look like a big print.

I have only tested this chart on a ticksize of 1 (seems to make the most sense to me anyway) and putting it here for others to review.

You can see in the image the shaded area that combined all the ticks from the regular TickChart into a single tick. This is because all the ticks in the tape were at 18:37:43.093 with an open of 55.08. This was merged to a single tick of volume 20.
 
Suggest other entries I might like
Details: TickBarsReassembled V0.1


November 14th, 2017
Size: 1.38 KB
Downloaded: 132 times
mkHarmonics 5 *
converted to NT8

@mk77ch holds the code copyright
 
Suggest other entries I might like
Details: mkHarmonics


November 12th, 2017
Size: 17.01 KB
Downloaded: 643 times
Larry Williams Accumulation Distribution with SMA 5 *
Larry Williams Accumulation Distribution without a volume component using an SMA.
Converted to NT8.
 
Suggest other entries I might like
Details: Larry Williams Accumulation Distribution with SMA


November 8th, 2017
Size: 3.23 KB
Downloaded: 342 times
OrderFlow SnapShot (NT8) 5 *
This is just a handy tool i made for myself and thought that maybe other traders will find it useful. As i am usually trading from charts but like to keep an eye on the orderflow, specially on areas of interest for entries or exits.

The indicator is just kind of a simple Footprint SnapShot, which can be toggled by double clicking on the chart. By holding the Control-Key while double clicking, the SnapShot will be reset.

Happy Trading,
Mike

(i am not planning to add anything else to this indicator but everybody is free to use and edit the provided code)


Updates:

- Dynamic Font-Size
- Small fixes
- BugFix
 
Suggest other entries I might like
Details: OrderFlow SnapShot (NT8)


November 7th, 2017
Size: 6.61 KB
Downloaded: 1636 times

Keywords: orderflow snapshot
Market Replay CL 11-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 11-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 11-17 (NT8)


November 5th, 2017
Size: 217.45 MB
Downloaded: 82 times
Trigger Lines (amaTriggerLines) 5 *
Version 1.3 September 17, 2017

The Trigger Lines indicator is composed of two lines. The leading line is a linear regression indicator (LinReg). The lagging line or signal line is an exponential moving average (EMA) of the leading line.

This indicator comes with two different options for identifying and uptrend or downtrend:

Trigger line cross: When the leading regression line crosses above the signal line, this is the beginning of an uptrend. Vice-versa the indicator signals a downtrend, as long as the leading line remains below the signal line.

Thrust bars: An uptrend is detected via an upthrust bar that closes and has a median above both trigger lines. A downtrend follows a downthrust bar that closes and has a median below both trigger lines.

The second trend definition adapts faster to changing market conditions, but also produces a higher number of false signals. The trend can be shown via paint bars. The indicator further comes with sound alerts that will signal a trend change.
 
Suggest other entries I might like
Details: Trigger Lines (amaTriggerLines)


October 30th, 2017
Size: 11.42 KB
Downloaded: 1279 times

Keywords: ema exponential linreg regression triggerlines trigger
Zerolag HATEMA (amaZerolagHATEMA) 5 *
Version 1.1 July 17,2017

The ZerolagHATEMA and ZerolagTEMA were presented by Sylvain Vervoort in “THE QUEST FOR RELIABLE CROSSOVERS” Technical Analysis of Stocks & Commodities, May 2008. The Zerolag HATEMA is based on a TEMA that uses Heikin-Ashi candles as input series. In a second step Sylvain Vervoort applied zero-lag techniques to the HATEMA to compensate for its lag. For further details, please read the article by Sylvain Vervoort.

This indicator does not depend on the selected input series, as it uses open, high, low and close of each candle. As a consequence this indicator may not be used with any other input series than price.
 
Suggest other entries I might like
Details: Zerolag HATEMA (amaZerolagHATEMA)


October 30th, 2017
Size: 5.36 KB
Downloaded: 402 times

Keywords: average filter heikinashi iir moving tema zerolag hatema
Zerolag TEMA (amaZerolagTEMA) 5 *
Version 1.0 March 17, 2017

The Zerolag TEMA and Zerolag HATEMA were presented by Sylvain Vervoort in “THE QUEST FOR RELIABLE CROSSOVERS” Technical Analysis of Stocks & Commodities, May 2008. The Zerolag TEMA is a version of the triple smoothed moving average which is less smooth, but more responsive to market movements. For further details read article by Sylvain Vervoort.

Sylvain Vervoort suggested to use the typical price as input series for the Zerolag TEMA. I have not hardcoded the typical price as input series. Please select the typical price as input series via the indicator dialogue box.
 
Suggest other entries I might like
Details: Zerolag TEMA (amaZerolagTEMA)


October 30th, 2017
Size: 4.95 KB
Downloaded: 279 times

Keywords: filter iir movingaverage tema zerolag
Session Pivots Monthly (amaPivotsMonthly) 5 *
Version 2.6 July 4, 2018

The Session Pivots Monthly is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data depends on the data supplier and reflects the daily high, low and close as shown on a daily chart.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending month with a close near the highs or the lows. A narrow pivot range indicates that the prior month was a balancing month and closed near the central pivot.

Prior month high, low and close: The indicator also displays the high, low and close for the prior trading month. These levels often act as support or resistance during the current trading month. Moreover, prior month high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior month high, L = prior month low, C = prior month close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.
 
Suggest other entries I might like
Details: Session Pivots Monthly (amaPivotsMonthly)


October 21st, 2017
Size: 12.59 KB
Downloaded: 1113 times

Keywords: eth fibonacci floor floorpivots jackson monthly pivotrange pivots range rth session settlement
Session Pivots Weekly (amaPivotsWeekly) 5 *
Version 2.6 July 4, 2018

The Session Pivots Weekly is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data depends on the data supplier and reflecta the daily high, low and close as shown on a daily chart.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending week with a close near the highs or the lows. A narrow pivot range indicates that the prior week was a balancing week and closed near the central pivot.

Prior week high, low and close: The indicator also displays the high, low and close for the prior trading week. These levels often act as support or resistance during the current trading week. Moreover, prior week high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior week high, L = prior week low, C = prior week close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.
 
Suggest other entries I might like
Details: Session Pivots Weekly (amaPivotsWeekly)


October 21st, 2017
Size: 12.55 KB
Downloaded: 1238 times

Keywords: eth fibonacci floor floorpivots jackson pivotrange pivots range rth session settlement weekly
Session Pivots Daily (amaPivotsDaily) 5 *
Version 2.6 July 4, 2018

The Session Pivots Daily is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data only depends on the data supplier and will reflect the high, low and close as shown on a daily chart.

Workaround for displaying RTH pivots on a full session chart:

- Add a secondary bar series to your primary price panel with a RTH trading hours template.
- Set the colors for candle outlines, candle wicks, up and down bars to transparent.
- Apply the amaPivotsDaily indicator to the secondary bar series.

The indicator will now display RTH pivots on a full session chart. However, the pivots will only be displayed after the start of the regular session.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending day with a close near the highs or the lows. A narrow pivot range indicates that the prior day was a balancing day and closed near the central pivot.

Prior day high, low and close: The indicator also displays the high, low and close for the prior trading day. These levels often act as support or resistance during the current trading day. Moreover, prior day high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

CME holidays: There are six holiday sessions every year which are integrated with the following trading day. These holidays are Martin Luther King Day, President's Day, Memorial Day, Independence Day, Labor Day and Thanksgiving. The holiday sessions do not qualify as trade dates and there is no settlement. For this reason quality data feeds will not show daily bars. When "Input Data" is set to "DailyBars", the amaPivotsDaily will correctly calculate the pivots for both the holiday sessions and the trading day that follows the holiday. The NinjaTrader in-built pivots indicator will produce false values on the days after the holiday session. When "Input Data" is set to "Full Session", both indicators will calculate false values for the day after the holiday session.

Comparison to pivot indicators coded for NinjaTrader 7: For NinjaTrader 7 I had used subdivided session templates for calculating RTH pivots on full session charts. This approach was too complicated and mainly confused users. Subdivided session templates also truncate all bars at the session begin and the session end, which in turn distorts other indicators such as moving averages or oscillators. Therefore all our NT8 indicators are now compatible with the default trading hours template <instrument settings>. However, the new approach makes the task of coding RTH pivots for full session charts more complex. Such an indicator needs to add a third bar series with minute data and also come with a small data base containing the regular trading hours and holidays for the most liquid futures contracts. This can no longer be provided free of charge.

On the other hand the pivot indicators for NinjaTrader 8 have become more reliable. Preloading of daily data is no longer necessary, as the pivots indicator will load daily data automatically, when applied to a chart. This makes the pivots easier to use and less error prone.

Update version 2.1.: Bug removed. Indicator did not display pivots calculated from daily data, when the first day of the lookback period of the chart was a trading day without daily settlement (see six holiday sessions listed above).
Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.
 
Suggest other entries I might like
Details: Session Pivots Daily (amaPivotsDaily)


October 21st, 2017
Size: 12.29 KB
Downloaded: 2349 times

Keywords: daily eth fibonacci floor floorpivots jackson pivotrange pivots range rth session settlement
View the winning 'starred entries' ADXVMA (amaADXVMA) 5 *
Winning Entry October 1st, 2020 to November 1st, 2020 [1 votes]

Version 1.1 August 1, 2017

The Average Directional Index Variable Moving Average (ADXVMA) is a volatiltiy based moving average with the volatility being determined by the value of the ADX. The ADX provides levels of support during uptrends and resistance during downtrends. The indicator may also be used as a trendfilter. The trend can be positive, negative or neutral.

The ADXVMA that can be downloaded here may also be used with other input series than price. The trend can be shown via paint bars and is exposed as a public property.

Note: The ADXVMA has the trend exposed as a public property. This property can be accessed programmatically. However, it cannot be currently accessed via the market analyzer. In order to access the Trend series via the market analyzer, a specific MarketAnalyzerColumn is required. The MarketAnalyzerColumn is not yet included with the install file, as it has led to freezes with NT 8.0.8.0. The bug has been confirmed by NinjaTrader developers and only fixed with the latest release NT 8.0.9.0. (issue #12054). The market analyzer column and sound files for the ADXVMA will be availabe with a future update.
 
Suggest other entries I might like
Details: ADXVMA (amaADXVMA)


October 21st, 2017
Size: 11.37 KB
Downloaded: 1105 times

Keywords: adaptive adx movingaverage resistance support vidya vma volatility
SuperTrend U11 (amaSuperTrendU11) 5 *
Version 2.3*) November 16, 2017

The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties. It is a Stop-And-Reverse (SAR) indicator based on breakouts from a modified Keltner channel.

The SuperTrendU11 is an enhanced version of the original SuperTrend indicator that comes with the following modifications:

- You may select between 36 different moving averages for the baseline.
- The baseline is calculated one bar ago to avoid recalculating with each incoming tick.
- You may select from 4 different volatility measures - average true range, average range, residual mean absolute deviation and residual root mean square deviation
- Average true range and average range can be calculated from 30 different moving averages.
- All volatility measures are also calculated one bar ago.

In fact there is no point in moving a trailing stop towards the current price intra-bar. Therefore a trailing stop should always be calculated from the prior bar and not the last price.

When you import the install file to NinjaTrader, it will also install the following moving averages:

- Moving Median
- Moving Median TPO
- Moving Median VWTPO
- Moving Mean TPO
- Moving Mean VWTPO
- Adaptive Laguerre Filter
- ADXVMA
- Butterworth Filter
- Distant Coefficient Filter
- Double Weighted Moving Average (DWMA)
- Exponential Hull Moving Average (EHMA)
- Gaussian Filter
- Holt EMA
- Laguerre Filter
- Range Weighted Moving Average
- SuperSmoother
- Sine Weighted Moving Average
- Tillson T3
- Triple Weighted Moving Average (TWMA)
- ZerolagHATEMA
- ZerolagTEMA

It will also install debugged versions of MAX and MIN, as the in-built versions supplied with NT8 do not work correctly with Renko bars (RemoveLastBarSupported).

The SuperTrend U11 can be set to revert intra-bar or at the bar close. With default settings the stop line is only broken, when there is a bar close beyond the stop. The indicator further comes with paint bars and sound alerts.

The SuperTrend is a trend indicator, which can be used in various ways. It is best used as a trailing stop or as a trend filter. It can also be used as a stop-and-reverse indicator, but will only work as such in trending markets. Typically it will allow for profitable results while the market is trending and then give the money back in sideways markets.

Note: The SuperTrend U11 has the trend exposed as a public property. This property can be accessed programmatically. However, it cannot be currently accessed via the market analyzer. In order to access the Trend series via the market analyzer, a specific MarketAnalyzerColumn is required. The MarketAnalyzerColumn is not yet included with the install file, as it has led to freezes with NT 8.0.8.0. The bug has been confirmed by NinjaTrader developers and only fixed with the latest release NT 8.0.9.0. (issue #12054). The market analyzer column and sound files for the SuperTrend U11 will be available with a future update.

*) Unfortunately, the forum software always renames zip files to match the original file name. Therefore the zip file refers to a prior version of the amaSuperTrendU11. Be assured that the zip file contains the indicator version referenced in the headline.
 
Suggest other entries I might like
Details: SuperTrend U11 (amaSuperTrendU11)


October 21st, 2017
Size: 88.94 KB
Downloaded: 2562 times

Keywords: atr average averagetruerange mad median movingaverage movingmedian range rms sar supertrend trailing trailingstop
SuperSmoother Filter (amaSuperSmoother) 5 *
Version 1.0 March 12, 2017

These are the 2 pole and 3 pole Super Smoother Filters, which are derived from digital Butterworth Filters. They were first described by John F. Ehlers in his book "Cybernetic Analysis for Stocks and Futures". I have ported them from Easy Language to NinjaTrader.

The chart shows that the 2 pole super smoother filter (firebrick) gives a better approximation for price while the 3 pole filter (blue) offers superior smoothing.

To emulate the original SuperSmoother presented by John F. Ehlers, please select the PriceType "Median" as Input Series.
 
Suggest other entries I might like
Details: SuperSmoother Filter (amaSuperSmoother)


October 21st, 2017
Size: 2.71 KB
Downloaded: 391 times

Keywords: butterworth filter iir poles supersmoother
Sine Weighted Moving Average (amaSWMA) 5 *
Version 1.0 September 1, 2017

The Sine Weighted Moving Average (SWMA) is a FIR filter that applies weights to each bar of the lookback period in the shape of the bulge in a sine curve from 0 to pi. As a consequence the middle prices of the lookback period have the greatest weight.

The sine weighted moving average is quite similar to a triangular moving average.

I have coded it because it comes as a default moving average with other software packages and has been requested by users.
 
Suggest other entries I might like
Details: Sine Weighted Moving Average (amaSWMA)


October 21st, 2017
Size: 2.53 KB
Downloaded: 321 times

Keywords: average filter fir moving sine sineweighted
SuperTrend M11 (amaSuperTrendM11) 5 *
Version 2.0*) October 15, 2017

The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties. It is a Stop-And-Reverse (SAR) indicator based on breakouts from a modified Keltner channel.

The SuperTrendM11 is an enhanced version of the original SuperTrend indicator that comes with the following modifications:

- The moving average has been replaced with a more robust median.
- The median is calculated one bar ago to avoid recalculating with each incoming tick.
- The average true range (ATR) is calculated one bar ago to avoid recalculating with each incoming tick.

In fact there is no point in moving a trailing stop towards the current price intra-bar. Therefore a trailing stop should always be calculated from the prior bar and not the last price.

This version of the SuperTrend can be set to revert intra-bar or at the bar close. With default settings the stop line is only broken, when there is a bar close beyond the stop. The indicator comes with paint bars and sound alerts.

The SuperTrend is a trend indicator, which can be used in various ways. It is best used as a trailing stop or as a trend filter. It can also be used as a stop-and-reverse indicator, but will only work as such in trending markets. Typically it will allow for profitable results while the market is trending and then give the money back in sideways markets.

Note: The SuperTrend M11 has the trend exposed as a public property. This property can be accessed programmatically. However, it cannot be currently accessed via the market analyzer. In order to access the Trend series via the market analyzer, a specific MarketAnalyzerColumn is required. The MarketAnalyzerColumn is not yet included with the install file, as it has led to freezes with NT 8.0.8.0. The bug has been confirmed by NinjaTrader developers and only fixed with the latest release NT 8.0.9.0. (issue #12054). The market analyzer column and sound files for the SuperTrend M11 will be available with a future update.

*) Unfortunately, the forum software always renames zip files to match the original file name. Therefore the zip file refers to a prior version of the amaSuperTrendM11. Be assured that the zip file contains the indicator version referenced in the headline.
 
Suggest other entries I might like
Details: SuperTrend M11 (amaSuperTrendM11)


October 20th, 2017
Size: 15.15 KB
Downloaded: 778 times

Keywords: atr averagetruerange median sar supertrend trailing trailingstop
Moving Median (amaMovingMedian) 5 *
Version 2.0 October 15, 2017

The Moving Median is a central tendency which is calculated over a sliding window of price bars or indicator values. The median is the numeric value separating the higher from the lower half of the data set built from the input series over the selected window.

The moving median is a non-linear FIR (finite impulse response) filter that can be used like a moving average. Compared to all standard moving averages, it is a more robust central tendency, because it is less sensitive to outliers.

The moving median over a lookback period N is calculated by writing the last N values of the input series to an array, sorting the array and selecting the middle value of that array.
 
Suggest other entries I might like
Details: Moving Median (amaMovingMedian)


October 20th, 2017
Size: 2.47 KB
Downloaded: 396 times

Keywords: median moving movingmedian statistics
Range Weighted Moving Average (amaRWMA) 5 *
Version 1.0 March 12, 2017

The Range Weighted Moving Average (RWMA) is weighted moving average which uses the square of the range of the bar as weighting factor. The exact formula for the weighting factor has the bar range replaced with the number of tick levels covered by the bar.

Volatility is driven by volume and is approximately proportional to the square root of volume. Therefore it is possible to use the squared range as a proxy for volume. This is interesting when genuine volume figures are not available. This would be the case

- for FOREX data that comes without historical backfill for volume
- for instruments that are driven by other markets outside of the regular session

In these cases the VWMA may be distorted, whereas the RWMA will still return proper results.
 
Suggest other entries I might like
Details: Range Weighted Moving Average (amaRWMA)


October 20th, 2017
Size: 2.68 KB
Downloaded: 419 times

Keywords: average moving range rwma volatility vwma weighting
Opening Range (amaOpeningRange) 5 *
Version 2.2 January 31, 2018

The Opening Range is the range obtained from the highest and lowest price of a security during the first minutes of daily trading activity. For example the opening range can be calculated from the first 5, 15 or 30 minutes.

The opening period can be selected via the time zone, the start time and the end time of the opening period. For example if you wish to display a 30-minute opening range for ES, you would select Exchange_Time or US_Central_Standard_Time, a start time of 8:30 AM and an end time of 9:00 AM. The indicator will then display the regular open and the opening range high, low and midline.

You may also use this indicator to display the pre-session range. It is possible to display the entire pre-session range that covers the period from the start of the trading day until the regular open, or you may select a custom period for the pre-session.

The indicator will only return an accurate opening range, if it is calculated from minute bars that align to the start time and end time of the selected opening period. For example, if you wish to display an accurate 30-minute opening range for ES, you may only apply the indicator to 1-min, 2-min, 3-min, 5-min, 10-min, 15-min or 30-min bars. When selecting other bar periods or bar types, there will be overlapping bars in the beginning and the end of the opening period. This may result in a slightly inaccurate opening range.

If you wish to display a correct opening range on any bar type, please proceed as follows:

- Add a secondary bar series of 1-min*) bar to your primary price panel.
- Set the colors for candle outllines, candle wicks, up and down bars to transparent.
- Apply the indicator to the secondary 1-minute bars for an exact calculation.

*) When you add a minute bar series to a tick or volume chart, this will slightly distort the chart, as the bar spacing is adjusted to the duration of the bars. As a consequence of the law of large numbers, the distortion will be smaller, if you add a secondary bar series with a lower resolution. It is therefore recommended to use the highest bar period available that aligns to the start time and end time of the opening period. For a 30-min opening period for ES, you may therefore add 30-min bars instead of 1-min bars.

The chart attached shows the 30-min opening range on a 1000-tick chart to ES 12-17. The invisible secondary bars that were added are 30-min bars.

Update January 31, 2018: Version 2.1 did not properly calculate the opening range when the first bar of the opening range had a time stamp greater than the end time of the opening period (display of short period opening ranges on higher timeframe charts). Version 2.2 has the bug removed.
 
Suggest other entries I might like
Details: Opening Range (amaOpeningRange)


October 20th, 2017
Size: 10.60 KB
Downloaded: 2553 times

Keywords: globexsession open opening openingrange regular resistance session support overnightrange regularsession
Adaptive Laguerre Filter (amaAdaptiveLaguerreFilter) 5 *
Version 1.1 August 1, 2017

This is a four element Adaptive Laguerre Filter as described by John Ehlers in his paper "Time Warp - Without Space Travel".

The Laguerre Filter is a smoothing filter based on Laguerre polynomials. Its first term is an EMA, which is then further smoothened with a damping factor. The damping factor may take any value between 0 and 1. When the damping factor is set to 0, the Laguerre Filter becomes a finite impulse response (FIR) filter. When the damping factor is set to a value close to 1, the filter becomes dramatically smoother, but will have a significant lag.

The Adaptive Laguerre Filter is based on the simple Laguerre Filter, but uses a variable damping factor. The damping factor is adjusted such that low frequency components are delayed more than high frequency components. The resulting filter is an adaptive moving average and can be compared to the Kaufman Adaptive Moving Average (KAMA) or the Variable Index Dynamic Average (VIDYA).
 
Suggest other entries I might like
Details: Adaptive Laguerre Filter (amaAdaptiveLaguerreFilter)


October 20th, 2017
Size: 9.89 KB
Downloaded: 441 times

Keywords: adaptive damping filter iir laguerre polynomials
Laguerre Filter (amaLaguerreFilter) 5 *
Version 1.0 March 6, 2017

This is a four element Laguerre Filter as described by John Ehlers in his paper "Time Warp - Without Space Travel".

The Laguerre Filter is a smoothing filter based on Laguerre polynomials. Its first term is an EMA, which is then further smoothened with a damping factor. The damping factor may take any value between 0 and 1. When the damping factor is set to 0, the Laguerre Filter becomes a finite impulse response (FIR) filter. When the damping factor is set to a value close to 1, the filter becomes dramatically smoother, but will have a significant lag.

The indicator that can be downloaded here is a four element Laguerre Filter. I have replaced the damping factor with a synthetic lookback period which allows for adjusting smoothness and lag. A lookback period of 1 corresponds to a simple 4-period triangular moving average.

LaguerreFilter(1) = TMA(4)

When the synthetic lookback period is increased, the filter becomes smoother but has a slower response to price changes.
 
Suggest other entries I might like
Details: Laguerre Filter (amaLaguerreFilter)


October 20th, 2017
Size: 2.67 KB
Downloaded: 287 times

Keywords: damping filter iir laguerre polynomials
Market Replay CL 10-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 10-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.
 
Suggest other entries I might like
Details: Market Replay CL 10-17 (NT8)


September 24th, 2017
Size: 217.99 MB
Downloaded: 114 times
MurreyMath Lines for NT8 5 *
MMv1.5.1 from NT7 Converted to NT8 as a paid job, a friend and I had this done by member Sagor here and he was great to work with.

A few small additions such as the ability to change the frame period/lookback added. Uploaded here with thanks for all others' hard work on indicators and conversions provided - Japhro and Scotty
 
Suggest other entries I might like
Details: MurreyMath Lines for NT8


September 16th, 2017
Size: 8.59 KB
Downloaded: 1073 times
Traders Dynamic Index (amaTradersDynamicIndex) 5 *
Version 1.2 September 16, 2017

The Traders Dynamic Index (TDI) is a trend following momentum indicator based on the RSI. It was developed and presented by Dean Malone. The Traders Dynamic Index comes with the following plots

- the Priceline, which is a SMA(2) of RSI(13)
- the Signalline, which is a SMA(7) of RSI (13)
- the Midband, which is a SMA(34) of RSI (13)
- Bollinger Bands around the SMA(34) using a standard deviation multiplier of 1.62

The following combinations may be considered as trade rules:

- go long, if Priceline > 50
- go short if Priceline < 50
- consider an exit, if Priceline is above 68 or below 32

- go long if Priceline > Signalline
- go short if Priceline < Signalline
- exit if Priceline crosses Signalline

- trendfilter long, when Priceline > Midband
- trendfilter short, when Priceline < Midband

- add to long, when Priceline > upper Bollinger Band
- add to short, when Priceline < lower Bollinger Band

Detailed rules how to use the Traders Dynamic Index have been published by Dean Malone within the framework of the E.A.S.Y. trading method.
 
Suggest other entries I might like
Details: Traders Dynamic Index (amaTradersDynamicIndex)


September 16th, 2017
Size: 8.24 KB
Downloaded: 1100 times

Keywords: bollinger bollingerbands oscillator rsi tdi tradersdynamicindex
Gaussian Filter (amaGaussianFilter) 5 *
Version 1.1 September 5, 2017

Gaussian Filter as described by John Ehlers in his paper "Gaussian and Other Low Lag Filters".

https://www.mesasoftware.com/papers/GaussianFilters.pdf

You may set the number of poles in the filter to 1,2,3 or 4. A 1-pole filter will have a better approximation to price, whereas the 4-pole filter has superior smoothing.

To emulate the original Gaussian filter presented by John F. Ehlers, please select the PriceType "Median" as Input Series.
 
Suggest other entries I might like
Details: Gaussian Filter (amaGaussianFilter)


September 5th, 2017
Size: 2.84 KB
Downloaded: 362 times

Keywords: filter gaussian iir movingaverage
SessionVWAP Bimonthly/Quarterly/Annual (amaNMonthlyVWAP) 5 *
Version 2.0 August 11, 2017

The N-Monthly VWAP is the volume-weighted average price (VWAP) of a security for the selected N-month period. The VWAP gives a fair reflection of the market conditions throughout the selected period and is one of the most popular benchmarks used by large traders.

The N-Monthly VWAP can be set to calculate for the entireperiod or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.
 
Suggest other entries I might like
SessionVWAP Monthly (amaCurrentMonthVWAP) 5 *
Version 2.0 August 11, 2017

The Current Month VWAP is the volume-weighted average price (VWAP) of a security for the current month. The VWAP gives a fair reflection of the market conditions throughout the trading month and is one of the most popular benchmarks used by large traders.

The Current Month VWAP can be set to calculate for the entire trading month or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.
 
Suggest other entries I might like
Details: SessionVWAP Monthly (amaCurrentMonthVWAP)


September 5th, 2017
Size: 9.93 KB
Downloaded: 975 times

Keywords: monthly quarterrange session standarddeviation volatility volume volumeweighted vwap
SessionVWAP Weekly (amaCurrentWeekVWAP) 5 *
Version 2.0 August 11, 2017

The Current Week VWAP is the volume-weighted average price (VWAP) of a security for the current week. The VWAP gives a fair reflection of the market conditions throughout the trading week and is one of the most popular benchmarks used by large traders.

The Current Week VWAP can be set to calculate for the entire trading week or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current week.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.
 
Suggest other entries I might like
Details: SessionVWAP Weekly (amaCurrentWeekVWAP)


September 4th, 2017
Size: 9.89 KB
Downloaded: 1222 times

Keywords: session standarddeviation volatility volume volumeweighted vwap weekly
SessionVWAP Daily (amaCurrentDayVWAP) 5 *
Version 2.5 October 27, 2019

The Current Day VWAP is the volume-weighted average price (VWAP) of a security for the current day’s trading session. The VWAP gives a fair reflection of the market conditions throughout the trading day and is probably the most popular benchmark used by large traders.

The Current Day VWAP can be set to calculate for the entire trading day or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current session.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates. Therefore it is recommended to select an early anchor point and only use VWAP and volatility bands once they have stabilized.
 
Suggest other entries I might like
Details: SessionVWAP Daily (amaCurrentDayVWAP)


September 4th, 2017
Size: 9.72 KB
Downloaded: 2950 times

Keywords: quarterrange session standarddeviation volatility volume volumeweighted vwap
Holt EMA (amaHoltEMA) 5 *
Version 1.0 March 6, 2017

The Holt EMA is a trend corrected exponential moving average based on a double exponential smoothing model.

Holt’s paper, “Forecasting Seasonals and Trends by Exponentially Weighted Moving Averages” was published in 1957 in O.N.R. Research Memorandum 52, Carnegie Institute of Technology.

The tools developed by Holt & Winters are mainly used for forecasting time series.
 
Suggest other entries I might like
Details: Holt EMA (amaHoltEMA)


September 4th, 2017
Size: 2.56 KB
Downloaded: 334 times

Keywords: ema exponentialsmoothing forecast holtema movingaverage smoothing
Double Weighted Moving Average (amaDWMA) 5 *
Version 1.0 March 6, 2017

The Double Exponential Moving Average (DEMA) was first presented by Patrick Mulloy in "Stocks & Commodities" in 1994. It attempts to offer a smoothed average with less lag than a straight exponential moving average.

The Double Weighted Moving Average (DWMA) replicates the DEMA formula, applying it to the WMA (weighted moving average) instead of the EMA.
 
Suggest other entries I might like
Details: Double Weighted Moving Average (amaDWMA)


September 4th, 2017
Size: 3.89 KB
Downloaded: 241 times

Keywords: dema dwma exponential movingaverage weighted
Exponential Hull Moving Average (amaEHMA) 5 *
Version 1.1 July 30, 2017

The Hull Moving Average (HMA) was developed by Alan Hull and is mainly used to identify the current market trend. The HMA is composed of three weighted moving averages (WMA).

The Exponential Hull Moving Average (EHMA) has those weighted moving averages replaced with exponential moving averages.

The Exponential Hull Moving Average exhibits an excellent balance between smoothing and lag (also see "Moving Averages for Financial Data Smoothing" by Aistys Raudys, Edmundas Malčius, and Vaidotas Lenčiauskas – Vilnius University, Faculty of Mathematics and Informatics)
 
Suggest other entries I might like
Details: Exponential Hull Moving Average (amaEHMA)


September 4th, 2017
Size: 2.48 KB
Downloaded: 536 times

Keywords: ehma exponential hma hull movingaverage
Relative Ranges (amaRelativeRanges) 5 *
Version 1.1 July 21, 2017

Only to be used with minute or daily charts.

The Relative Ranges indicator measures the range of a minute bar or a daily bar against the average range for the same time of the day over the preceding n days. The indicator comes with two different options to calculate the relative range:

All_Days: Today's ranges are compared to the average ranges of the N preceding business days. The default value is N = 40. With the setting "All_Days" the indicator requires the use of proper trading hours templates which match the trading day of the instrument traded. Trading hours templates that cut the week into arbitrary sessions - such as the session template 24/7 - cannot be handled by the indicator and will trigger an error message.

Day_Of_Week: Today's ranges are compared to the average range calculated for the same day of the week over the N preceeding weeks. The default value is N = 8. With the setting "Day_Of_Week", all session templates can be handled.

Relative Ranges: The relative ranges are shown as a percentage of the average volume calculated over the reference period.

Cumulated ratio: Compares the cumulated ranges of the current day to the average ranges of the selected reference period.

Holidays: Holidays as selected via the indicator dialogue box may be excluded from all calculations.

Default settings: Relative range bars between 80% and 120% of the normal range are shown as white bars. Higher relative range bars are shown as blue bars, lower relative range bars are shown as red bars.
 
Suggest other entries I might like
Details: Relative Ranges (amaRelativeRanges)


September 4th, 2017
Size: 12.43 KB
Downloaded: 563 times

Keywords: cumulated range relativeranges
Relative Volume (amaRelativeVolume) 5 *
Version 1.1 July 21, 2017

Only to be used with minute or daily charts.

The Relative Volume indicator measures the volume of a minute bar or a daily bar against the average volume for the same time of the day over the preceding n days. The indicator comes with two different options to calculate the relative volume:

All_Days: Today's volume is compared to the average volume of the N preceding business days. The default value is N = 40. With the setting "All_Days" the indicator requires the use of proper trading hours templates which match the trading day of the instrument traded. Trading hours templates that cut the week into arbitrary sessions - such as the session template 24/7 - cannot be handled by the indicator and will trigger an error message.

Day_Of_Week: Today's volume is compared to the average volume calculated for the same day of the week over the N preceeding weeks. The default value is N = 8. With the setting "Day_Of_Week", all session templates can be handled.

Relative Volume: The relative volume is shown as a percentage of the average volume calculated over the reference period.

Cumulated ratio: Compares the cumulated volume of the current day to the average cumulated volume of the selected reference period.

Holidays: Holidays as selected via the indicator dialogue box may be excluded from all calculations.

Default settings: Relative volume bars between 80% and 120% of the normal volume are shown as white bars. Higher relative volume bars are shown as blue bars, lower relative volume bars are shown as red bars.
 
Suggest other entries I might like
Details: Relative Volume (amaRelativeVolume)


September 4th, 2017
Size: 11.32 KB
Downloaded: 1068 times

Keywords: cumulated relativevolume volume
Market Replay CL 09-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 09-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 09-17 (NT8)


August 21st, 2017
Size: 262.01 MB
Downloaded: 97 times
Wilder's Moving Average 4 *
Wilder's Moving Average (Tested on NT8.0.8.0)

Wilder’s Smoothing indicator was developed by Welles Wilder and mentioned in his book” New Concepts in Technical Trading”. Wilder used the Smoothing indicator as a component in several of his other indicators including the RSI. Wilder’s Smoothing indicator can be used in the same capacity as other moving averages. The smoothing indicator is used as an input in Wilder’s other indicators such as the RSI, Wilder’s Swing Indicator and Wilder’s Volatility Indicator.
 
Suggest other entries I might like
Details: Wilder's Moving Average


August 6th, 2017
Size: 1.44 KB
Downloaded: 225 times
Market Replay CL 08-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 08-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 08-17 (NT8)


July 29th, 2017
Size: 234.07 MB
Downloaded: 96 times
Ribbon Trader NT8 5 *
This is the NT 8 Version of https://futures.io/download/ninjatrader-7/indicators/1637-download.html?view

I made a slight visual modification so that up/down arrows are painted once a trend stays with 4 blocks of the same color. The code logic hasn't been changed at all.
 
Suggest other entries I might like
Details: Ribbon Trader NT8


July 18th, 2017
Size: 3.44 KB
Downloaded: 1215 times

Keywords: ribbontrader
HMA Color MTF 5 *
Hello Traders, the is an NT8 indicator(exported from 8.0.7.0) that is a colored HMA. The HMA can be calculated from any chart type and period (Multi Time Frame). In the picture is a 15M CL chart. It has two instances of this indie. One is an HMA21 calculated from a 10 min chart and the second is a HMA21 calculated from a 10Range. The indie title displayed on the chart shows the type and period info, as does the title in the user configuration panel. The HMA is completely configurable for color, drawing type HMA Period, Chart Type and Chart Period. There is a label in the right margin of the chart that identifies the indicator. Depending on the timeframes of the chart vs the HMA, you may need to enable Tick Replay in the Data Series. Let me know what you think!

Thanks to Ninja Jim D for his suggestions.

Trade Well
Bob
 
Suggest other entries I might like
Details: HMA Color MTF


July 8th, 2017
Size: 6.79 KB
Downloaded: 550 times
CamsVpR4 Volume Profile for NT8 5 *
CamsVp is a volume profile indicator for NinjaTrader 8 with added features of delta, footprint and imbalance. CamsVp has great flexibility in the selection of chart regions from which to generate a profile. The start and end of regions may be defined as window, date, current, bar and daily. There is also a handy mouse drawing tool to define regions. A region may be as small as one bar or as large as computer memory capacity. There is no limit as to the number of regions that can be drawn. Granularity can be chosen to minimize computer load especially for large time span profiles. CamsVp automatically configures itself according if a chart's Tick Replay feature is enabled. Calculation mode and bid/ask delta are affected. Scales may be mixed, for instance a volume profile can be shown with a Delta scale.

Detailed instructions and discussion thread is here:
https://futures.io/elite-circle/42467-camsvp-volume-profile-indicator-discussion-thread.html#post645383

R4: added Enable CamsVpRegion to control cross talk using multiple instantiations on same chart. 11/8/2017
R3: added volume imbalance, changed display to Bid/Ask, value area boundary line, improved text alignment, scale and bar opacity, 8/6/2017
R2: fixed granular bar offset, added Day and Volume granularity, improved value area calculation, added VA smoothing, fixed Right orientation for regions Bar and Daily, 07/07/2017
R1: initial release, 6/19/2017
 
Suggest other entries I might like
Details: CamsVpR4 Volume Profile for NT8


June 20th, 2017
Size: 11.45 KB
Downloaded: 3192 times

Keywords: ask bid delta footprint imbalance market profile volume
Market Replay CL 07-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 07-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 07-17 (NT8)


June 16th, 2017
Size: 224.77 MB
Downloaded: 126 times
Market Replay CL 06-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 06-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 06-17 (NT8)


June 5th, 2017
Size: 217.49 MB
Downloaded: 105 times
NT8 Hull Moving Average Color Change 5 *
Hello All,

Like many others, in migrating over to NT 8 many indicators are not available yet. I use the HMA often and prefer when color changes if rising or falling.

Here's my conversion using the script found on the NT Forums here: https://ninjatrader.com/support/forum/showthread.php?t=79551&page=7

Enjoy.
 
Suggest other entries I might like
Details: NT8 Hull Moving Average Color Change


May 29th, 2017
Size: 4.81 KB
Downloaded: 537 times

Keywords: change color hma
Spread 5 *
Shows the difference between two instruments. Particularly useful for treasury spreads like FYT, FOB, NOB, etc. You must specify the front and back leg and the ratios. The CME lists current ratios here: https://www.cmegroup.com/trading/interest-rates/intercommodity-spread.html

Example: NOB spread
FrontRatio: 3
BackRatio: 1
FrontLeg: ZN 06-17
BackLeg: ZB 06-17

Note that it adds a separate data series for each leg of the spread so you don't need either leg to be the main chart data series (IE you could add NOB spread to an ES chart).

Video tutorial: https://www.youtube.com/watch?v=hX-ETZhi2Sg&feature=youtu.be

Version 1.0
 
Suggest other entries I might like
Details: Spread


May 23rd, 2017
Size: 1.83 KB
Downloaded: 540 times
Horizontal Ray DrawingTool 5 *
This drawing tool is coded as a native NT DrawingTool class rather than within an indicator wrapper. There have been many requests over the years for NT to add a native horizontal ray tool but it has still yet to be implemented. This tool was created based on the original NT Lines.cs file.

I've yet to experience any issues, however, it is not advised that any trading actions be based on this add-on (i.e. alert to trigger a live market order if this horizontal ray is crossed). Hot-key activation is also supported through the standard NT selection dialog.

Exported using NT Version 8.0.12.0 64-bit (Standard)

Edit (04/02/18): version 4 has been uploaded which fixes price label code that would sometimes display the wrong price

Version: 4.0
 
Suggest other entries I might like
Details: Horizontal Ray DrawingTool


May 12th, 2017
Size: 3.92 KB
Downloaded: 965 times
Round Numbers V2 5 *
This code allows lines to be drawn at regular price levels. I had this converted professionally from a NT7 indicator so I cannot assist with support.
The lines are customisable with the usual line options as well as the line length.
I hope someone else finds it helpful.
 
Suggest other entries I might like
Details: Round Numbers V2


May 10th, 2017
Size: 2.62 KB
Downloaded: 583 times

Keywords: levels price
'NoGaps' ChartStyle - eliminate intraday candle gaps 5 *
This chart style is identical to the standard NinjaTrader candlestick style except that it uses the previous candle's closing value for the current candle's open value (except when the current bar is the first bar of a session). This eliminates single tick gaps between intraday bars when the last price changes on the first tick of a new bar. As a result, charts appear smoother and are easier to read and interpret, without any price data truly being modified. See attached example of ES.

Exported using NT Version 8.0.6.1 64-bit (Standard)

edit: The file has been updated to display doji bodies in the same color as the wick (NT default behavior is to display dojis with the candle outline color, but this becomes a problem when you try to display candles with no outline.)
 
Suggest other entries I might like
Details: 'NoGaps' ChartStyle - eliminate intraday candle gaps


May 10th, 2017
Size: 1.50 KB
Downloaded: 224 times

Keywords: candlesticks chartstyle ohlc ninjascript
HIGH VOLUME ALERT 4 *
A simple indicator that shows the high volume. You can change the volume alert depending the time frame used.
Converted from NT7. I found this indicator useful in this forum some years ago. I use it in time frames of one and five minutes.
 
Suggest other entries I might like
Details: HIGH VOLUME ALERT


May 7th, 2017
Size: 2.27 KB
Downloaded: 745 times
MACD Color and Stochastic Color 5 *
This is an NT8 conversion of my MACDColor and Stochastic Color indicators. Both have user definable OB/OS levels, and alert capability.
 
Suggest other entries I might like
Details: MACD Color and Stochastic Color


May 5th, 2017
Size: 25.92 KB
Downloaded: 771 times

Keywords: macd ob os stochastic
Market Replay CL 05-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 05-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 05-17 (NT8)


April 23rd, 2017
Size: 169.68 MB
Downloaded: 123 times
Market Replay CL 04-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 04-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 04-17 (NT8)


April 23rd, 2017
Size: 185.78 MB
Downloaded: 99 times
Market Replay CL 03-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 03-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 03-17 (NT8)


April 23rd, 2017
Size: 171.91 MB
Downloaded: 91 times
Market Replay CL 02-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 02-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 02-17 (NT8)


April 23rd, 2017
Size: 113.73 MB
Downloaded: 85 times
Market Replay CL 01-17 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 01-17



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.




Note: this is Market Replay data for NinjaTrader 8. The format is different from NT7.

Also note, these downloads are likely not to include Sundays data.
 
Suggest other entries I might like
Details: Market Replay CL 01-17 (NT8)


April 23rd, 2017
Size: 185.91 MB
Downloaded: 93 times
Market Replay CL 12-16 (NT8)
NT 8 Market Replay data for CL

Contract: CL 12-16



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-16 (NT8)


April 23rd, 2017
Size: 161.13 MB
Downloaded: 30 times
LBR Oscillator 5 *
Shows the difference between fast and slow SMA. The dots show momentum from previous highs or lows.

Converted from LBR 3/10 Oscillator by Keith.


Enjoy!
 
Suggest other entries I might like
Details: LBR Oscillator


March 26th, 2017
Size: 3.88 KB
Downloaded: 754 times
Fractal Pivots 4 *
Converted from NT7 Fractals_Mike indicator. Based on this definition.

https://www.investopedia.com/terms/f/fractal.asp

Hope you enjoy!

UPDATE: 3/26/17 Fixed bugs where you could not save in a chart template and so its less sluggish on chart.

Its been brought to my attention this indicator may or may not use excessive RAM. Word of caution if you have issues using this indicator. I personally have not had issues besides sluggishness moving the x-axis.

PM me for issues.
 
Suggest other entries I might like
Details: Fractal Pivots


March 26th, 2017
Size: 2.65 KB
Downloaded: 1193 times
SwingInfoPro 4 *
Mar 17th 2017 Version 1
This Indicator displays the swing information at cursor position, useful for quickly gauging the current swing duration and distance in ticks within the Toolbar with options to customize including:

- Font Color
- Font Select
- Show Swing Information Label
- Hide Indicator Name

I'm self taught and just starting to understand what's required to convert my NT7 indicators over to NT8 so let me know if this can be improved.
 
Suggest other entries I might like
Details: SwingInfoPro


March 17th, 2017
Size: 3.44 KB
Downloaded: 342 times

Keywords: swing info
NT8 Workspace Startup tool 5 *
NT8 Workspace Startup tool

I built this little tool to help reset my _WorkSpace.xml file.

Example of use:

Upon coding an indicator you forget to dispose of a resource so when pressing F5, NT8 crashes. The problem is NT8 will reload that last workspace....only to crash again....and again. You want to restart with another workspace loaded so you can fix the problem, right?

Well, the old and tedious way is to open your _WorkSpaces.xml file, search for OpenWorkspaces and delete the entries, replacing them with one/some default templates. After doing this a hundred times...I decided enough is enough

(I believe you can safe load NT8 to do a similar job, but I like the flexibility of choosing my own workspaces to load.)

When NT8 is closed just run the .exe file and drag and drop which workspaces you want to load up upon the next restart. Instructions are inside the zip file. Do not import into NinjaTrader!

If you wish to see inside the .exe file just use any decompiler like DotPeek.

*** The NT7 version is here

 
Suggest other entries I might like
Details: NT8 Workspace Startup tool


March 9th, 2017
Size: 34.18 KB
Downloaded: 476 times
Center of Gravity / Polynomial Regression Channel / Belkhayate COG 5 *
This is the Belkhayate COG (Center of Gravity) indicator. Also known as a polynomial regression channel with 3 std deviations and many other names. I transported this code directly from here.

If anybody has any useful information regarding the usability of the indicator I'd appreciate the feedback. The fact that it repaints takes a lot away from it, but here it is in case someone has use for it!
 
Suggest other entries I might like
Details: Center of Gravity / Polynomial Regression Channel / Belkhayate COG


March 6th, 2017
Size: 2.89 KB
Downloaded: 951 times

Keywords: center channel cog gravity of polynomial regression belkhayate
ADXVMA_Color_Bands 5 *
R4: 4/10/2020 - NT made some changes that caused errors with some indies. I took care of the error with this rev. When the button hides the indie, you need to hit f5 to hide the background color. If someone knows how to fix this... let me know.
R3:12/20/2018 - I added a switch to show or hide the indicator. I renamed it to ADXVMAButtonBand.
R2: 9/23/2018- I noticed a small error when displaying the Period in the title block.
R1: 2/22/2018- I found an error in how larger user inputs were being handled for the volatility band multipliers. If you were using < 4 multiplier, then you will not see a difference.

Hello Traders, I have added color and Volatility (Keltner-esk) Channels to the popular ADXVMA. You can select your colors for an Up trend, Down trend or Neutral. The Keltner Bands can be colored and set to the multipliers that you prefer. In the picture, the ADXVMA is set to 5 periods and the bands are set to 1.5 for the inner band and 2.5 for the outer band.

Many Thanks to Zondor for the original NT8 coding of the ADXVMA.

Trade Well
Bob
 
Suggest other entries I might like
Details: ADXVMA_Color_Bands


March 5th, 2017
Size: 20.32 KB
Downloaded: 930 times
SMA Slope Color 5 *
Simple Moving Average changing slope color.
 
Suggest other entries I might like
Details: SMA Slope Color


March 2nd, 2017
Size: 1.98 KB
Downloaded: 879 times
Delete your NinjaTrader 8 cache 5 *

Run the console app to delete all files and folders within the 'NinjaTrader 8> db> cache' folder.

The NT8 data cache folder saves pre-formatted data to suit your bars types, the purpose of which is to enable faster startup times.
Sometimes in certain circumstances your chart bars will be full of errors, so it doesn't hurt to clear the cache once in a while, or every day if you are having issues.

Use only if you are having problems with data, tick replay indicators or if you have modified your bars types.

This will NOT make a backup of your cache files, so use carefully!
It WILL, however, check for NT8 being open and advise you as such. It WILL check for your cache folder being empty and advise you as such.

This was built using an English speaking culture on Windows 10. It directs the delete command to:
'yourDocumentsFolder\NinjaTrader 8\db\cache'. This will not work on XP. Although I have tried to use code to work on all cultures, I have not tested it as such.

Thanks to bobc635 for suggesting this simple concept.

Tips:

* Extract the file to the desktop and run from there.
* If you wish to see inside the .exe file just download a free decompiler like DotPeek.

 
Suggest other entries I might like
Details: Delete your NinjaTrader 8 cache


February 26th, 2017
Size: 26.20 KB
Downloaded: 956 times
BidAskSpread 5 *
Converted this indicator from NT7 to NT8. Displays the live spread updates in corner and draws dots on bars of the bid and ask. Its works on ticks, on live data only, on forex and futures only. Bring the good karma!
 
Suggest other entries I might like
Details: BidAskSpread


February 25th, 2017
Size: 2.28 KB
Downloaded: 438 times

Keywords: ask bid nt8 spread
DValue Area Profile Indicator 5 *
This is a conversion of the DValueArea developed by Ben L. and originally coded for the NinjaTrader 7 platform by DeanV. I found it on the Ninjatrader Support Forum, converted by Ninjatrader Support.

It shows the developing value area and POC, also pre-session. Profile types are VOC, TPO, VWTPO and VTPO. You have the option of showing a realtime POC.

Please contact the original author for any questions or comments.
 
Suggest other entries I might like
Details: DValue Area Profile Indicator


February 23rd, 2017
Size: 12.67 KB
Downloaded: 2008 times
EdsLevel2Dom 5 *
EdsLevel2Dom_V2.0.1
A simple histogram indicator of depth of market (DOM) data also known as standing, limit and stop orders. Displays along side the price scale with a handy adjustable margin to avoid other price scale indicators. Written for simplicity and speed of execution. A performance test has been added to evaluate the Refresh Delay parameter.
This is EdsLevel2Dom_V1.0 (NT7) rewritten for NT8.

Discussion thread: https://futures.io/elite-circle/30977-edslevel2dom-discussion-thread.html


V2.0 Initial release
V2.0.1 fixed lock function
 
Suggest other entries I might like
Details: EdsLevel2Dom


February 22nd, 2017
Size: 5.32 KB
Downloaded: 1690 times
A notice to all downloaders 5 *
This is not a download, this is a

Notice to all Downloaders

As at NT8.0.4, Feb 2017, Ninja Trader LLC has been struggling to contain errors and memory leaks on some indicators. It may not be the code itself but something internal within NT8. It seems to be due to the multi-threaded nature of NT8, ie. multiple cores being used to make calculations. In regards to 'memory leaks', I refer to NT8 sharply escalating it's use of memory, causing NT8 to crash eventually. This is often caused by objects in code being created in one thread and the indicator goes looking for it in another thread.

Please be patient and use indicators carefully, especially on tick replay.

The way to monitor/help your NT8 is thus:

1. Hold down Ctrl & Alt and then press Delete. This will open up your task manager. You can observe NT8's memory usage. If you see NT8 memory sharply increase then you may have a 'memory leak'. You should shut it down by clicking on NT8 in the task manager and then 'End Task'. Keep in mind this will not save your latest workspace.

2. Keep your 'Log' tab open to see for any warnings. They will usually appear in orange. If you have an OnRender DirectX warning then chances are NT8 will have a memory leak and will crash a period of time later. Shut down as above.

3. I always open NT8 now with ONLY a simple workspace (all else should be closed) with only a couple of naked minute/tick charts on it. Connect to your broker, let the data load, then open your complicated workspaces. This seems to solve most memory leaks. The change from Historical state to Realtime seems to cause NT8 some grief with the OnRender method.

I do feel that NT8 has kept us in the dark with communication, so that's why I'm giving you some tips that work for me. I'm interested if you have any other ideas that work for you
 
Suggest other entries I might like
Details: A notice to all downloaders


February 19th, 2017
Size: 1.10 KB
Downloaded: 85 times
MacdBB V4.0.2 NT8.0.4 + gradient + pullback setting 5 *


MacdBB V4.0.2 NT8.0.4 + gradient + pullback setting

22 Feb: Fixed alert message. Added file selector for sounds.

Includes:

* Paint bars.
* Candle outlines.
* Paint background of panel and chart.
* Standard option.
* New pullback option. If the dots are above/below the average then the dominant trend colors the dots.
* Gradient option with improved gradient methods.
* Radial gradient 'bling' for your dots.
* Custom audio alert.
* Gapless option. Use intraday to ignore the opening gap. Useful for determining the opening trend.
* Chart signals for entry and exit, based on crossing of the zero line, average or bollingers.
* New SignalIntSeries using +1 for uptrend, -1 for downtrend to use in your strategies.
* Choice between standard deviations or mean absolute deviation (MAD).

** I plan to make a version soon that will accept several smoothers for calculation and I'm looking into Text to Speech for audio alerts, something NT should have done.

Make sure you extract the .zip file first to show the files. Inside you will find the .zip to import!

Make sure you insert the included audio files here: C:\Program Files (x86)\NinjaTrader 8\sounds

All new coding done according to NT8 best practices here.

As usual, let me know if something ain't quite right.

 
Suggest other entries I might like
Details: MacdBB V4.0.2 NT8.0.4 + gradient + pullback setting


February 19th, 2017
Size: 115.70 KB
Downloaded: 1866 times
ToolBarClock 5 *
Feb 16th 2017 Version 1
This Indicator displays a clock within the Toolbar with options to customize including:

- Font Color
- Font Select
- Format Select
- Culture Select
- Show Clock
- Display All Tabs

Feb 18th 2017 Version 1.1
Culture enum update now includes additional languages:
- French
- German
- Dutch
- Finnish
- Hungarian
- Italian
- Portuguese
- Russian
- Spanish
- Swedish

Mar 3rd 2017 Version 1.2
Error resolved within State.Terminated that resulted in clock disappearing from toolbar when connecting to an account.


I'm self taught and just starting to understand what's required to convert my NT7 indicators over to NT8 so let me know if this can be improved.
 
Suggest other entries I might like
Details: ToolBarClock


February 16th, 2017
Size: 3.96 KB
Downloaded: 920 times