Search

Categories

Show

Help

Search Results

Submitted by greenr
Found 3 matching entries

Entries

Full IB range bands - ryanIBbands

Exported using NT Version 7.0.1000.11

Indicator will only run on NT 7.0.1000.5 or later

This is a modified version of Fat Tail IB bands V38

It has added deviation for a full 4 standard of deviations

""Use at own risk as i am not a professional programmer""

The indicator displays the current open, the initial balance (IB) and upper and lower range bands that are calculated by adding and subtracting fractions of the initial balance to the IB high and IB low.

You can only use this indicator with an appropriate session template. The opening time will align itself to the start time of the RTH session, as specified via session template. The hybrid setting assumes that you want to use the 3rd intraday session as RTH session for FOREX and currency futures and the second session for all other instruments.

Example ES: Select a session template with the following sessions: Session 1 (night session) 15:30 - 8:30 Central Time, Session 2 (RTH) 8:30 - 15:15 Central Time. Select second session for opening range.

Select length of opening period: The length of the opening range can be selected via indicator dialogue box The default setting is 60 minutes.

Multipliers for range bands: The multipliers for the upper and lower range bands can also be changed. The default settings for the bands are 0.5, 1 and 2, meaning that the first upper band is built from the IB high by adding half of the IB range, and similar for the other bands.

Developing range: Prior to the completion of the initial balance, the indicator plots the developing ranges in gray to show that the ranges are still unstable.

Night session or pre-session range: The indicator also has an option to display the full night session, European or Asian session range. This feature is not used with the default settings. I did not add it on purpose, it was already part of the opening range indicator, and it was easier to leave it than to remove it.

European Session Range: You can select start and end time of the European Session in CET (Central European Time). The European Session is pre-configured for the time between 8:00 AM and 1:00 PM CET.

Asian Session Range: You can select start and end time of the Asian Session in TST (Tokyo Standard Time). The Asian Session is pre-configured for the time between 9:00 AM and 3:00 PM TST.

Update June 2, 2011: New signature for GetNextBeginEnd() implemented.
Update June 11, 2011: Small bug removed, indicator did not display opening range and pre-session range correctly during the training period (first bars of the chart, after scrolling to the left horizontally).
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 25, 2011: Serialization of the plots and indicator dialogue box changed.
Update January 24, 2012: Offset added, opening period no longer needs to be aligned to session start.
Update February 19, 2012: Option added to cut off the opening range at the next session break.

Category NinjaTrader 7 Indicators

Details: Full IB range bands - ryanIBbands
Category: NinjaTrader 7 Indicators

February 8th, 2013
Size: 9.75 KB
Downloaded: 790 times

Current Week Vwap Bands - ryanCurrentWeekVwapV40

Exported using NT Version 7.0.1000.11

Indicator will only run on NT 7.0.1000.5 or later

This is a modified version of Fat Tail SessionVWAP Week V40

It has Half Deviation bands and more colour control over the individual bands

""Use at own risk as i am not a professional programmer""

Exported using NT Version 7.0.1000.8

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Last: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method has two advantages. It corrects for a trend and it is much faster to calculate. It is therefore the default method of the indicator, and should always be used on high resolution charts built from ticks.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

For further details on update, also see the SessionVWAP Week V40.

Update January 25, 2012: Minor enhancements. Small bug removed, which had affected the plot colors.

Category NinjaTrader 7 Indicators

Details: Current Week Vwap Bands - ryanCurrentWeekVwapV40
Category: NinjaTrader 7 Indicators

February 5th, 2013
Size: 8.19 KB
Downloaded: 464 times

Current Day Vwap Bands - ryanCurrentDayVwapV40

Exported using NT Version 7.0.1000.11

Indicator will only run on NT 7.0.1000.5 or later

This is a modified version of Fat Tail SessionVWAP Daily V40

It has Half Deviation bands and more colour control over the individual bands

""Use at own risk as i am not a professional programmer""

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Last: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method has two advantages. It corrects for a trend and it is much faster to calculate. It is therefore the default method of the indicator, and should always be used on high resolution charts built from ticks.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update Jan 23, 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (High + Low + Open + Close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex Holiday Calendar for 2012 added. Small bug removed, which had affected the plot colors.

Category NinjaTrader 7 Indicators

Details: Current Day Vwap Bands - ryanCurrentDayVwapV40
Category: NinjaTrader 7 Indicators

January 29th, 2013
Size: 8.68 KB
Downloaded: 1003 times