For my trading i make a lot of use of the $TICK. Sadly though.. ninja brokerage does not supply a really good $TICK index.
So until now i always had a web browser open showing tradingview's $TICK in the bottom left corner of my screen.
It worked.. but i had to open the web browser every trading session, scale it and move it to the correct location on my screen.
So to make life easier , i created this add on.
This add-on adds new menu item to New menu called $TICK.
When you selected it a new ninja trader window opens which shows the $TICK from tradingview.com.
Since it's a ninja window , its part of your workspace and ninja will automaticly open & position it the next time you startup ninja again.
Note.. by default you will see the light skin (white color) of trading view.
But since the $TICK window is just hosting IE as a webbrowser you can interact with, and login into tradingview right from the $TICK window it self. After logging in with your credentials you can right click on the chart to choose the dark skin as you see in the screenshot
November 1st, 2018
Size: 1.89 KB
Downloaded: 801 times
2011
erwinbeckers
Is there anyone that can code the Ninjatrader7 indicator named "RulerV4" by MBAgearhead. He did a fantastic job
and this indicator is invaluable. It is exactly what many of us were looking for. If you havent used it, everyone should
take a look. However, I am also transitioning to Ninjatrader 8 and would very much love it if someone could code that
indicator for Ninjatrader 8....that would be so awesome !!!
October 31st, 2018
Size: 94.71 KB
Downloaded: 536 times
2010
PhxEagle
Version 1.3 October 30, 2018
The MACDBBLines indicator is built from a standard MACD indicator with Bollinger Bands added to the signal line. The MACD values are shown as dots. This indicator is typically used to generate with-trend entries when the upper or lower Bollinger Band is violated.
Minor trend: The minorlower timeframe trend is up when the MACD is rising. It is down when the MACD is falling.
Major trend: The higher timeframe trend may be taken from the MACD itself. An major uptrend is signaled when MACD > 0, while MACD < 0 stands for a major downtrend.
Public Properties: The indicator comes with a few public Series<double> that can be accessed via other indicators or automated strategies. These will also be shown in the strategy builder. The series "Trend" may be used to detect the minor trend. "Trend" will show the value +2 when the MACD is rising and above the upper Bollinger Band, +1 when it is rising and below the upper Bollinger Band, -1 when it is falling and above the lower Bollinger Band, -2 when it is falling and below the lower Bollinger Band. You will further find two Series<double> "LongSignal" and "ShortSignal". "LongSignal" will return +2 for an upper band violation in a major uptrend (strong signal), +1 for an upper band violation in a major downtrend (weak signal) and 0 for no signal. Accordingly, "ShortSignal" will return +2 for a lower band violation in a major downtrend (strong signal), +1 for an lower band violation in a major uptrend (weak signal) and 0 for no signal.
Market Analyzer Column: The indicator comes with two separate market analyzer columns. The first column will simply indicate the trend and return values based on rising and falling MACD above or below the Bollinger Bands as described above. The second column will return entry signals, where +2 stand for a strong long signal, + 1 for a weak long signal, 0, for no signal, -1 for a weak short signal and - 2 for a strong short signal. For the market analyzer I have squeezed long and short signals into a single column, as there is little space on a market analyzer. For the Series<double> objects, I have separated the LongSignal and ShortSignal series, as they are designed to return positive values or 0 for no signal only. Please pay attention to the difference.
Paint Bars: The indicator comes with paint bars that reflect the minor trend. The colors are similar to the colors for the MACDBB dots, but you may differentiate between upcloses and downcloses.
Sound Alerts: The indicator comes with sound alerts that will be triggered when the upper or lower band is violated, or when the major trend changes.
This indicator compares current rolling volume for a user selected time frame and compares it to an expected volume for a user selected time frame over a user selected n period in days.
The standard settings are set to 10 minute rolling and 10 minute expected with a 13 day lookback period. So, basically the bar plot shows the current continuous rolling 10 minute volume and compares it to the line plot that is an average of every 10 minute time slot over the last 13 days.
You also have and option to exclude user selected days from the lookback period.
I find this works well with range or tick bars, but also works with time based bars.
I have the latest version before this awesome tool was deleted and the site was taken down.
Sad to see, i really like the CTRL and Alt function to be able to see SL and Targets preview before i took the trade.
I wish there was a way to convert this to NT8, i really miss this tool.
It has some bugs, like the built in drawing calc tool, it calcs wrong of 1 Tick, not a big deal but still.
Tried it again now and it doesn't seem to work as well as it did in earlier versions of NT7
IF someone could get a hold of the source code to this that would be a killer to convert for NT8, would really love to see that happen. IF SO PM RIGHT AWAY
Apologies for this upload. I have found that there is something in the calculations that is incorrect, but haven't been able to track it down. It almost always says the current volume is more than the average, even when that seems unlikely or impossible.
I have uploaded a new indicator, RVOL (relative volume), that has accurate calculations in it, based on my manual gathering of values and performing the calculations. You can find it here:
If I figure out what's wrong with this one, I'll upload a repaired version. In the meantime, please use the RVOL indicator mentioned above.
Thank you!
*******************************
This indicator is inspired by Pete from JigSaw Trading. He likes to call it the Cumulative Sheep Index, but it actually compares volume on the current bar to the average volume for the same time of day, calculated over the last X number of days.
You can set the number of days and use it on bars of any duration. I have no idea what it will do with non-time-based bars, so be prepared for it to blow up, if you try that.
Please be aware that the smaller the bar duration and the larger the number of days being averaged, the longer it'll take to complete the plot. 1-min bars and 60 days, for example, take several minutes to complete.
There is an option to have some of its data sent to the Output Window, so you can assure yourself it's working, in case you choose bars and days that take a very long time to calculate.
Yours to download.
(In answer to the question posted in the 2nd 'thanks', yes. The values in the right column show the difference in volume between the current bar volume and the average volume for that bar for the previous X number of days.)
October 25th, 2018
Size: 3.46 KB
Downloaded: 343 times
2006
DavidBodhi
Custom drawing tool which allows you to draw Elliot Waves in NT 8
Supported waves are:
12345
ABC
ABCDE
WXY
WXYXZ
For each wave you can select if you just want to see the labels, or also the wave lines itself and
the degree of the wave.
After installing you can find the elliot wave tools under the drawing tools menu.
Note you can assign keyboard shortcuts to any of the elliott drawing tools using the tools->Hot Keys menu.
28-10-2018: Updated.. fixed memory leak and some other small changes
September 11th, 2019 03:08 PM Gianni78bari Too bad, it doesn't work
Is there a way to fix it?
January 14th, 2019 01:02 PM Tangotx The indicator is not working for me anymore.... anybody experiencing the same problem?
October 28th, 2018 07:54 PM runit Hey do the delta indicators only work with NT lifetime license to access orderflow? I'm not seeing anything. Is there a
July 15th, 2022 08:17 AM daviddube How do I get the Sound Alerts to work? I have placed .WAV files in the NT8 Sound Folder but they do not sound-off Love
the indie...Thanks
July 12th, 2020 09:34 PM rickr
June 18th, 2020 12:34 PM MARKETPLACE
April 29th, 2020 04:38 PM 4X77 thanks, I am grateful for your efforts and for sharing.
January 23rd, 2020 06:27 PM hobbys11 very nice, thank you Fat Tails
January 29th, 2020 02:33 PM mangustas I'm having an error saying that the browser is not supported. I've checked the settings, my default browser is chrome an
d TW is working fine on chrome but it's having trouble with this one.
April 11th, 2019 06:13 PM Malthus Great
November 7th, 2018 10:00 AM brettji Thanks for the submission. works great
November 7th, 2018 02:01 AM Ratdog So cool. Now I can see when my TV strategies fire and won't have to track via Chrome, hahahah awesome man thanks!!