Search
futures io


Categories Help    

Search Results
Searching for entries matching monthly, looking in keywords for any words
Found 4 matching entries

Sort by

Entries
Session Pivots Monthly (amaPivotsMonthly) 5 *
Version 2.6 July 4, 2018

The Session Pivots Monthly is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data depends on the data supplier and reflects the daily high, low and close as shown on a daily chart.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending month with a close near the highs or the lows. A narrow pivot range indicates that the prior month was a balancing month and closed near the central pivot.

Prior month high, low and close: The indicator also displays the high, low and close for the prior trading month. These levels often act as support or resistance during the current trading month. Moreover, prior month high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior month high, L = prior month low, C = prior month close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.


Category NinjaTrader 8 Indicators and More 
 
Suggest other entries I might like
SessionVWAP Bimonthly/Quarterly/Annual (amaNMonthlyVWAP) 5 *
Version 2.0 August 11, 2017

The N-Monthly VWAP is the volume-weighted average price (VWAP) of a security for the selected N-month period. The VWAP gives a fair reflection of the market conditions throughout the selected period and is one of the most popular benchmarks used by large traders.

The N-Monthly VWAP can be set to calculate for the entireperiod or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.


Category NinjaTrader 8 Indicators and More 
 
Suggest other entries I might like
SessionVWAP Monthly (amaCurrentMonthVWAP) 5 *
Version 2.0 August 11, 2017

The Current Month VWAP is the volume-weighted average price (VWAP) of a security for the current month. The VWAP gives a fair reflection of the market conditions throughout the trading month and is one of the most popular benchmarks used by large traders.

The Current Month VWAP can be set to calculate for the entire trading month or it can be set to calculate for custom hours such as the regular session only. The VWAP further comes with volume-weighted standard deviation bands or quarter range bands. Although the VWAP uses volume information, it is best set to “Calculate” = “On price change”. It is not necessary to recalculate it with each incoming tick.

Trading hours template: The trading hours template should be set to <instrument settings> or any other trading hours template that reflects the contractual trading hours of the instrument.

Full_Session: The VWAP will be calculated for the full session as selected per trading hours template.

Custom_Hours: You may select custom hours for calculating the VWAP in different time zones.

Standard_Deviation: The volatility bands are calculated as a selectable multiple of the standard deviation, where the standard deviation is calculated for the selected session and week.

Quarter_Range: The volatility bands are calculated as a selectable multiple of the quarter range for the current month.

Accuracy: The indicator calculates both VWAP and volatility bands from the primary bars shown on the chart. All data points of each bar are used for the calculation in order to obtain the best possible result. However, accuracy also depends on the chart resolution. Accuracy increases as trading volume accumulates.


Category NinjaTrader 8 Indicators and More 
 
Suggest other entries I might like
SessionPivots V43 5 *
Exported using NT Version 7.0.1000.26

Indicators will only run on NT 7.0.1000.5 or later.

Family of 6 indicators to display daily, weekly and monthly pivots and OHL of current day, current week and current month. The package includes

- anaPivotsDailyV43
- anaPivotsWeeklyV43
- anaPivotsMonthlyV43

Options for the Pivot indicators: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the prior session

- anaCurrentDayOHLV43
- anaCurrentWeekOHLV43
- anaCurrentMonthOHLV43

Options for the OHL indicators: Open, high and low of the current period, Fibonacci retracement levels calculated from current high and low, noise bands, target bands based on the average daily/weekly/monthly range.

Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are adapted to dark chart backgrounds.

Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template only ETH pivots, ETH OHL and ETH noise and target bands can be displayed. For displaying RTH pivots, it is recommend to use a multi-session template that divides the day into the night session, regular session and after-session.

Use of daily data on intraday charts: The 3 pivot indicators are designed to load daily data, if the option for "Calculate from session" is set to “Daily Bars”. This the data used by the indicator:

"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.

Auto setting for the 3 pivot indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.

VWAP: The VWAP of the prior day is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.

Auto setting for the 3 OHL indicators: The Auto setting will preselect the third intraday-session as the regular session for FOREX & currency futures, but preselect the second intraday-session for all other instruments.

Noise Bands: The OHL indicators can be used to display noise bands. The noise is determined by averaging the smaller move Min (High – Open, Open – Low) over N1 & N2 days. The average values are displayed in a data table. The noise is added to and subtracted from the current open.

Target Bands: The OHL indicators can be used to display target bands. The targets can be determined in two different ways: Either the average daily range over N1 & N2 days is added to the current low (high projection) or subtracted from the current high (low projection), or the daily expansion from the open Max(High – Open, Open – Low) is averaged over N1 & N2 days and added to and subtracted from the open. The average daily range or average daily expansion is shown in the data table.

GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President’s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.

Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update May 24, 2011: Due to a bug, the new signature for GetNextBeginEnd() is only implemented for OnBarUpdate() but not for Plot() Override.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 11, 2011: Indicator reshaped, small bug removed that affected weekly ETH pivots after a holiday that fell on a Monday.
Update July 20, 2011: Serialization of the plots changed.
Update December 12, 2011: Levels R5, S5 added. Some labels changed. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update January 6, 2012: Holiday fields added for anaCurrentDayOHLV38
Update June 20, 2012: Shading added for Pivot Range and Jackson Zones
Update February 16, 2013: Indicators entirely redesigned. Holiday calendar added for 2013. The former SessionNoiseBands & Session Volatility Bands have now been integrated into the CurrentOHL indicators.
Update March 11, 2013: No added features, but 2 bugs removed that had affected the plots with specific settings.
Update March 13, 2013: Bug removed, RTH pivots did not work, when data table was unselected.
Update April 10, 2013: Plot modified for compatibility with charts built from multiple bar series
Update May 10, 2013: Regular close can now be displayed for the remaining hours of the trading day. Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update January 22, 2013: CurrentDayOHLV42 did not display pivots for prior days when set to RTH. Bug removed.
Update September 17, 2014: With indicator setting "RTH" current day's range is now displayed as 0 during the night session.
Update September 20, 2014: Minor update, data table for ADR/ADN now plots on top of the indicator plots. Indicator plots can now be accessed via SHIFT + mouse wheel to change the Z-Order of the indicator.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Update February 11, 2015: Minor update. Formatting of ATR/Noise improved for currency pairs with quote currency JPY.

Detailed explanations how to use the indicator can be found here:

https://futures.io/elite-circle/25791-toolbox-2013-trading-session.html
https://futures.io/elite-circle/3790-ninjatrader-7-toolbox-floor-pivots.html


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
 


 
Category
 



Copyright © 2021 by futures io, s.a., Av Ricardo J. Alfaro, Century Tower, Panama, +507 833-9432, info@futures.io
All information is for educational use only and is not investment advice.
There is a substantial risk of loss in trading commodity futures, stocks, options and foreign exchange products. Past performance is not indicative of future results.