1. Added new SPLIT session mode, that will show AH and RTH profiles together in one chart. Works with other types as well.
2. Added Display profile levels such as Trading Session High, Trading Session Low, Mid, VPOC, Value Area High and Value Area Low
3. Added IB minutes parameter to allow you to set initial balance of your preference. IB parameter is turned off for AH session. IB won’t show if you have bar set to more than IB minutes.
4. Enhanced Developing VPOC function. Displays now straight progressing line for clear visibility.
5. Added Naked Vpoc levels with an option to display closed naked vpocs
6. Added Naked Close (GAP) levels with an option to display closed GAPS
7. Added option to display the naked level date and price level to the right panel
8. Added Summary section below the Profile that displays total profile volume with an option to format kilo, million and no formatting.
9. Added Summary section below the Profile that also display Initial Balance range and Daily range.
10. Added option to compute profiles for all bars on the chart vs on screen bars. This is important for naked levels in the past computation and display on screen without a need to squeeze the chart to naked level day.
Updated 05/21 :
Fixed IB settings for 24/7 & RTH Template;
[IB] summary level display adjustment dynamically to the top of the range.
Updated 05/22 :
Upgraded to GOMi's 4.6 version- Thanks to TimeTrade@BMT
Added a separate Pen style for dVPOC.
Updated 05/23 :
Fixed issue with the price display for currency and Bond markets
Updated 05/25 :
Added option to turn the status message off <8.13>
For this to work, additionally download and compile Hot Key Manager file from here GomHotKeyManager
Updated 05/26 :
Fixed Serialization problem for Fonts
Updated 05/27 :
Added toolbar buttons to set profile attributes.
Added option to show IB for overnight session
Added option to set color for summary text
Added option to set color for naked level text
Added option to show Continuous VA/VPOC/VWAP
Updated 05/28 :
Fixed the screen flicker issue
Updated 08/21 :
Attempt to fix performance problem reported during the RTH session start
The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.
You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.
ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.
RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.
RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.
Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.
Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.
Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.
Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.
Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.
Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.
Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Please download the new Supertrend U11 (Universal), which allows to calculate the stop line from median, mode and 27 other moving averages.
This is a new implementation of the TradeStation SuperTrend indicator for NinjaTrader 7. The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties.
The SuperTrend M11 is particularly stable and has a few advantages over other SuperTrend indicators:
It uses a moving (statistical) median of the arithmetic mean (High + Low)/2 of the bars instead of a moving average. The (statistical) median is known to be more robust than any average.
It calculates both the Median and the ATR (average true range) 1 bar ago, whereas the original SuperTrend indicator takes the ATR and moving average of the current bar. If you use the current bar's ATR, the current bar's breakout is partly measured against its own range. This is particularly true, if the ATR period is short.
Accessing the trend: The indicator comes with a BoolSeries that holds the trend. This BoolSeries can be accessed by other indicators or automated strategies.
Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the close of the signal bar has taken out the stop line. The position may be reversed at the open of the next bar. The paint bars will only change colors for the bar after the signal bar. The arrow will be also plotted for the entry bar.
Reverse Intra-bar = true: This is an unusual setting for the SuperTrend. The signal will be generated with the first tick that has plotted on the other side of the stop line. In this case the position may be reversed intra-bar for the signal bar. Paintbars and arrows will already plot for the signal bar.
Paintbars: The indicator has an option to display the current trend via paintbars. Downclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.
Arrows: The indicator has an option to display trend changes via an arrow.
Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.
Comparison between SuperTrend M1 and SuperTrend M11:
The SuperTrend M11 calculates both the average true range and the median 1 bar ago. This results in a considerable saving in CPU load, if you use the indicators in CalculateOnBarClose = false mode. The SuperTrend M11 does the median calculation only once per bar, while the SuperTrend M1 recalculates it with every incoming tick. If you use the indicator with CalculateOnBarClose = true setting, you can also continue to use the SuperTrend M1. There will be no significant difference in performance.
Changed formula: The Supertrend M11 will give slightly different results, when compared with the Supertrend M1. If you want to reproduce the settings of your Supertrend M1, you should use the same value for the ATR period and the ATR multiplier, but reduce the value for the median period by 1. The result will still not be identical. Also for both indicators a minimum size for the ATR values has been imposed, the ATR may not be smaller than the ticksize. This is only important for lower timeframes during low volatility and prevents the SuperTrend from changing the trend too often.
SuperTrend M1: The indicator package contains an updated version of the SuperTrend M1. However, I recommend to switch to SuperTrend M11.
Update August 10, 2011 : Visual design improved. The new indicator version can also be called by other indicators and strategies.
Update May 23, 2012: Entirely recoded version, which uses Median and ATR 1 bar ago to avoid recalculation with every tick. Sound alerts added that trigger intra-bar and which can be used on replay. Smaller improvements added.
Update May 24, 2012: Bug removed, upclose candles were not plotting properly.
Update June 30, 2012: New SuperTrend U11 "Universal" released, this is a new indicator - see link for more information
Update October 2, 2012: Indicator simplified. Trend state can no longer change intra-bar.
Update October 3, 2012: Indicator now allows for displacement. BoolSeries modified for accessing the trend. Trend change intra-bar is possible with option reverse intra-bar and COBC = false.
Update March 5, 2013: Arrows now plotting one bar earlier for the option Reverse intra-bar = true.
Please remove old version before installing this one.
Current version is V7
This indicator tries to detect price/indicator divergence.
Any indicator in Ninja can be used and detection is possible on historical and real time charts.
To set the user indicator : goto ECIDiv parameters / Data / Input Series and choose your indicator.
When the user indicator data uses multiple periods, the Plot input is used.
ECIDiv was designed for standard Ninja period types. Usage of other period types is not guaranteed nor supported.
The divergence computation uses local turning points (called pivots) calculated on the price and the user indicator input.
When price and indicator diverge (regular or hidden divergences) an audio and visual signal is given.
Size of pivot (number of bars to the left and right) is adjustable (default size is 1).
Reminder :
Regular Divergence occurs when :
* Long signal : price makes LL and indicator HL.
* Short signal: price makes HH and indicator LH.
Hidden Divergence occurs when :
* Long signal: price makes HL and indicator LL.
* Short signal : price makes LH and indicator HH.
(LL = Lower Low, HL = Higher Low, HH = Higher High, LH = Lower High).
ECIDiv draws the input indicator. If you don't want it to be drawn, simply set it to transparent.
The input method introduced in the V7 is based on the one used by the indicator DivergenceInputSeries (that you can also find in Big Mike Forum).
TODO :
* Continue watching Big Mike Trading users feedback.
Changelog
V7 : November 1st 2013
* Major Change/Enhancement : new input method. any indicator is accepted.
* Removed : Divergence target (buggy).
V6 :
* Change : CalculateOnBarClose default is now false
* Change : Removed dots from divergence drawings (users request)
V5 :
* Added Divergence logging for internal compatibility checks
* Added Logging for internal performance logging
V4 : December 7th, 2012 + Update March 3 2013
* Added TSI, RSI, MACD
* Enhanced variable periods : slow, fast, smooth
V3 : November 21, 2012
* Added adjustable sound alert file path.
* Enhanced signal colors (separate colors for HD/RD, divergence line width).
* Added divergence price target helper.
V2 : October 3rd, 2011
* Added REGULAR Divergence detection
* Added RSI indicator to the compatible indicators list
* Added adjustable pivot left and right size
* Added adjustable signal colors
V1 : September 30th, 2011
* Initial release with HIDDEN Divergence signals for CCI/Momentum/DoubleStochastics.
March 9th, 2023 05:21 PM MONICAP hello, and thanks for your time developing and sharing this indicator. i want to ask if this could be available for NT8
also. thank you
September 16th, 2022 07:30 PM TomTownsend Very helpful, thank you, and for all you do!!!
February 19th, 2019 06:43 AM Anand Jagdeo good morning. I am fairly new to trading and would like to use this indicator. am i supposed to change the dates for the
se holidays to the current year. Please advise. Seems like a pretty good indicator if applied properly. Thanks
Anand
June 9th, 2017 11:10 AM mercyj does anyone know why I can't set the autoscale to FALSE? it's greyed out. and the pivots are all wacko on the chart
February 25th, 2017 12:27 PM essiar Not sure what I am doing wrong here, I have imported .cs files previously. I am trying to install ALTOGomMP.cs. I alread
y have GomCD, GomCDSMA_UpDown, GomDeltaVol_UpDown and GomRecorderIndicator in my list of indicators. I keep getting erro
r msg CS0246 which states there is a dll file missing. So when I try to install GomMP2.1 I get an error msg stating I ha
ve custom ninjascript files on my pc that have programming errors. So I delete ALTOgom.cs from the bin. I go to import G
omMP2.1 again and I get another error msg saying Archive may contain duplicate method names that already exist or there
is a required file missing. I have been using Ninja for 10 years now and have never run into this issue. Suggestions?
October 13th, 2016 03:28 PM CoCo
August 7th, 2016 07:37 AM dalebru Outstanding, thanks to both you and gomi.