Downloads

Categories

Show

Help

Search Results

Entries suggested by "gradient bar."

Entries

SessionPivots V43

Exported using NT Version 7.0.1000.26

Indicators will only run on NT 7.0.1000.5 or later.

Family of 6 indicators to display daily, weekly and monthly pivots and OHL of current day, current week and current month. The package includes

- anaPivotsDailyV43
- anaPivotsWeeklyV43
- anaPivotsMonthlyV43

Options for the Pivot indicators: Floor pivots, pivot range, midpivots, floor pivots wide, Jackson Zones, Fibonacci pivots, Camarilla pivots, VWAP of the prior session

- anaCurrentDayOHLV43
- anaCurrentWeekOHLV43
- anaCurrentMonthOHLV43

Options for the OHL indicators: Open, high and low of the current period, Fibonacci retracement levels calculated from current high and low, noise bands, target bands based on the average daily/weekly/monthly range.

Chart settings: Please set the right side margin under chart properties to 200 to allow for correct display of the labels. The colors are adapted to dark chart backgrounds.

Session templates: The indicators require the use of a correct session template for the instrument shown on the chart. With an ETH template only ETH pivots, ETH OHL and ETH noise and target bands can be displayed. For displaying RTH pivots, it is recommend to use a multi-session template that divides the day into the night session, regular session and after-session.

Use of daily data on intraday charts: The 3 pivot indicators are designed to load daily data, if the option for "Calculate from session" is set to �Daily Bars�. This the data used by the indicator:

"Calculate from session" = "DailyBars": Pivots are entirely calculated from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "DailyBars": High and low are taken from the full intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "RTH" & "Settlement/Close" = "DailyBars": High and low are taken from the regular intraday sessions. The close or settlement price is taken from daily data.
"Calculate from session" = "ETH" & "Settlement/Close" = "Intraday Close": High and low are taken from the full intraday sessions. The close is the last price traded for the full session.
"Calculate from session" = "RTH" & "Settlement/Close" = "Intraday Close": High and low are taken from the regular intraday sessions. The close is the last price traded for the regular session.

Auto setting for the 3 pivot indicators: The Auto setting will preselect ETH for FOREX and all CME currency futures, but preselect RTH for all other instruments.

VWAP: The VWAP of the prior day is always calculated from intraday data. Depending on the chart resolution it can be a few ticks off the correct value.

Auto setting for the 3 OHL indicators: The Auto setting will preselect the third intraday-session as the regular session for FOREX & currency futures, but preselect the second intraday-session for all other instruments.

Noise Bands: The OHL indicators can be used to display noise bands. The noise is determined by averaging the smaller move Min (High � Open, Open � Low) over N1 & N2 days. The average values are displayed in a data table. The noise is added to and subtracted from the current open.

Target Bands: The OHL indicators can be used to display target bands. The targets can be determined in two different ways: Either the average daily range over N1 & N2 days is added to the current low (high projection) or subtracted from the current high (low projection), or the daily expansion from the open Max(High � Open, Open � Low) is averaged over N1 & N2 days and added to and subtracted from the open. The average daily range or average daily expansion is shown in the data table.

GLOBEX holiday sessions with settlement next day: The indicators are preconfigured for Globex holiday sessions without settlement for trade date next day or later. These trade dates are President�s Day, Martin-Luther-King Day, Memorial Day, Independence Day, Labour Day and Thanksgiving. The indicators will display double day sessions for these days for all GLOBEX and NYMEX traded instruments.

Update Jan 23 2011: Globex Holiday Calendar for 2011. Holiday sessions will only be applied to Globex instruments. Price markers are now correctly formatted for US interest rate futures and FOREX.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update May 24, 2011: Due to a bug, the new signature for GetNextBeginEnd() is only implemented for OnBarUpdate() but not for Plot() Override.
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 11, 2011: Indicator reshaped, small bug removed that affected weekly ETH pivots after a holiday that fell on a Monday.
Update July 20, 2011: Serialization of the plots changed.
Update December 12, 2011: Levels R5, S5 added. Some labels changed. Label size is now adjustable. Globex Holiday Calendar for 2012 added.
Update January 6, 2012: Holiday fields added for anaCurrentDayOHLV38
Update June 20, 2012: Shading added for Pivot Range and Jackson Zones
Update February 16, 2013: Indicators entirely redesigned. Holiday calendar added for 2013. The former SessionNoiseBands & Session Volatility Bands have now been integrated into the CurrentOHL indicators.
Update March 11, 2013: No added features, but 2 bugs removed that had affected the plots with specific settings.
Update March 13, 2013: Bug removed, RTH pivots did not work, when data table was unselected.
Update April 10, 2013: Plot modified for compatibility with charts built from multiple bar series
Update May 10, 2013: Regular close can now be displayed for the remaining hours of the trading day. Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update January 22, 2013: CurrentDayOHLV42 did not display pivots for prior days when set to RTH. Bug removed.
Update September 17, 2014: With indicator setting "RTH" current day's range is now displayed as 0 during the night session.
Update September 20, 2014: Minor update, data table for ADR/ADN now plots on top of the indicator plots. Indicator plots can now be accessed via SHIFT + mouse wheel to change the Z-Order of the indicator.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.
Update February 11, 2015: Minor update. Formatting of ATR/Noise improved for currency pairs with quote currency JPY.

Detailed explanations how to use the indicator can be found here:

https://nexusfi.com/elite-circle/25791-toolbox-2013-trading-session.html
https://nexusfi.com/elite-circle/3790-ninjatrader-7-toolbox-floor-pivots.html

Category NinjaTrader 7 Indicators

Details: SessionPivots V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 79.16 KB
Downloaded: 18017 times

Keywords: camarilla dailyrange eth fibonacci floorpivots jackson midpivots monthly noise ohl open pivotrange pivots range rth session settlement stretch target vwap weekly

Market Strength/Weakness Snapshot Indicator

This indicator provides a quick visual of key market strength price concepts (various metrics contained in a table at the top middle of the screen). It is useful for determining the relative strength and weakness of different instruments using price relative to the following:

- Key volume profile concepts (price relative to the current day value area and POC and yesterdays value area and POC).

- vwap

- Initial balance range including extensions

- Retail Open (RTO) and yesterday's high and Low (YHL)

Attached picture shows a weak market.

See thread below for more details:

https://nexusfi.com/elite-circle/26322-volume-profile-market-profile-snapshot-indicator.html

update 1/14/2014

- Added initial balance and range extensions
- Added price relative to the Retail Open (RTO) above RTO open green up arrow, below retail open red down arrow.
- Added price relative to yesterday's high or low(YHL), price above yesterdays high green arrow and below yesterday's low red arrow and in between yellow dot.

To operate make sure the following supporting indicators are installed:

anaCurrentDayVWAPV42
anaIBRangeBandsV38
anaCurrentDayOHLV42
anaPivotsDailyV42

Category The Elite Circle

Details: Market Strength/Weakness Snapshot Indicator
Category: The Elite Circle

March 7th, 2013
Size: 42.50 KB
Downloaded: 3671 times

Line Alerts On Price & Indicators V3

Exported using NT 7.0.1000.25

This indicators allows you to enter user defined values, display them as horizontal lines and trigger alerts within a zone of several ticks or units around these lines.

The package includes two indicators:

- anaLineAlertsOnPrice
- anaLineAlertsOnIndicator.

Line Alerts On Price:

The indicator will automatically show up on the price panel. It can display up to 10 different alert lines. Each of the lines can be activated individually via the indicator dialogue box.

Sound alerts: When sounds are enabled, the indicator will generate sound alerts when one of the lines is approached. Sound files can be selected individually for each of the 10 alert lines.
E-mail alerts: When e-mails are enabled, the indicator will generate e-mail alerts when one of the lines is approached. For the e-mail feature you need to enter the sending and the destination e-mail via indicator dialogue box, and NinjaTrader should be enabled for sending e-mails under Tools -> Options -> Misc
Enabling lines: First enter an alert level and a label, then activate the line. Each line can be activated individually.
Trigger options: Cross_Above, Cross_Below & Cross_Above_Or_Below.
Offset in ticks: Allows to trigger an alert prior to the crossing of the line.
Rearm time: Can be set to avoid permanent triggering of alerts.

Line Alerts On Indicator:

The indicator can be used on other indicators and triggers an alert when the indicator value approaches the alert level. The referenced indicator should be used as the input series, and anaLineAlertsOnIndicator should be applied to the appropriate indicator panel manually.

Sound alerts: When sounds are enabled, the indicator will generate sound alerts when one of the lines is approached. Sound files can be selected individually for each of the 10 alert lines.
E-mail alerts: When e-mails are enabled, the indicator will generate e-mail alerts when one of the lines is approached. For the e-mail feature you need to enter the sending and the destination e-mail via indicator dialogue box, and NinjaTrader should be enabled for sending e-mails under Tools -> Options -> Misc
Enabling lines: First enter an alert level and a label, then activate the line. Each line can be activated individually.
Trigger options: Cross_Above, Cross_Below, Cross_Above_Or_Below, Larger_Than, Smaller_Than. The last two options should be used with histogram indicators such as volume.
Offset value: Allows to trigger an alert prior to the crossing of the line. The offset amount refers to the indicator scale.
Rearm time: Can be set to avoid permanent triggering of alerts.

Update July 28, 2011: Value 0 will be no longer displayed, if no values are entered for the second line. Number of lines reduced to 10. This is no restriction, as the indicator can be applied several times.
Update July 29, 2011: As lots of users tried to apply the lines to other indicators, I have added a version adapted for use with indicators.
Update August 3, 2011: Alert logic modified. Alert will fire when line is touched (offset = 0), or when a value is printed within the alert range (offset > 0).
Update December 7, 2011: A different sound file can now be selected for each of the lines. The user interface is improved.
Update September 20, 2012: For LineAlertsOnPrice option added to differentiate between Cross_Above and Cross_Below, for LineAlertsOnIndicator further option added for histograms, that is Larger_Than or Smaller_Than, new option added for e-mail alerts.
Update March 21, 2014: Small bug removed, indicator occasionally threw exceptions.
Update April 20, 2014: Values for price labels are now correctly display for interest futures in '16 / '32.
Update July 19, 2014: LineAlertsOnIndicator did not display all lines, when some of the alerts were disabled. Bug removed. LineAlertsOnPrice was not affected.

Category NinjaTrader 7 Indicators

Details: Line Alerts On Price & Indicators V3
Category: NinjaTrader 7 Indicators

July 19th, 2014
Size: 14.80 KB
Downloaded: 5952 times

Keywords: alerts horizontal lines resistance support

VolumeLadderMetroEdition

Its enhanced version of Volume Ladder with new features.
For more detail see following post.

https://nexusfi.com/elite-circle/2100-volume-ladder-highlight-addition-56.html

Changelog
Update: 17-May-2013

Its now VolumeLadderMetroEditionV1Extn1 with new features over V1.
New Center Ladder Type and New Cell Color Schemes introduced.

For more detail see

https://nexusfi.com/elite-circle/2100-volume-ladder-highlight-addition-69.html

Category NinjaTrader 7 Indicators

Details: VolumeLadderMetroEdition
Category: NinjaTrader 7 Indicators

May 17th, 2013
Size: 148.37 KB
Downloaded: 5310 times

Supply Demand Zones for NT8 (MTF)

The indicator plots supply and demand based zones from various time frames on the chart. It also adds a context menu item to the default Ninjatrader context menu to hide and show active and broken zones.

Version: 1.2 | Dec. 2016

Category NinjaTrader 8 Indicators and More

Details: Supply Demand Zones for NT8 (MTF)
Category: NinjaTrader 8 Indicators and More

November 6th, 2016
Size: 13.33 KB
Downloaded: 7509 times

Keywords: demand supply zones