What's New

Due to a breaking change in NT 8.0.17.0 I have re-released all of the indicators described elsewhere as there are a number of inter-dependencies. This seems far easier than breaking them apart - for me anyway (hope you agree). There are a number of sub-indicators, but the main ones are:

• smaCDCycleMTF
• smaDeltaMomentum
• smaCDMomentum
• smaVacuumBars
• smaProAm
• smaZiggetyZag
• smaSineWave

All described:

• Delta
• ProAM
• SineWave

I have included MathNet DLL in the ZIP to make things a little easier. And remember most need Tick Replay.

Enjoy.

Version 1.01 February 10, 2019

Exported with NT Version 8.0.17.1 (note this has been changed)

Notice(posted on 2/10/2019 at 1:45 PM MST)

It appears that something has changed in the latest NT update (8.0.17.1) that effected this indicator. The version here has been recompiled and re-exported using the latest release. No code changes were made. The version date (2/10/2019) and number (1.01) in the indicator parameters section reflect this change. If you have updated to the latest NT version and are having a problem or getting error messages either recompile the indicator or download and install the latest version.

I apologize for any confusion.


Summary

This indicator is an enhanced version of the NT8 BuySellVolume indicator. The enhancements are as follows:

• 1. Buys and Sells are show above and below the zero line,
• 2. The Net Volume (Buys-Sells) is plotted accordingly,
• 3. Total volume is displayed using a separate color and is shown accordingly,
• 4. A divergence marker (Bar close is opposite the Net Volume) can be indicated (not enabled by default),
• 5. Tick Replay (TR) is supported and defaults to display a different color for the TR Net Volume bars,
• 6. The width of the Buy/Sell, total, and Net histogram bars can be set individually, and
• 7. Option to reverse the Histogram Buy/Sell and Net widths so that the Net bar displays on the inside of the Buys/Sell bar.

Notes:

1. At times the Net volume is so small it can not be seen with the indicator region parameter set in Linear Mode. This can be rectified by setting it to Log mode as shown in the screenshot.
2. When changing the histogram bar sizes use odd numbers as the bars are painted from the midpoints.
3. For a divergence to be detected in addition to the Net number and bar direction being opposite it must pass a percentage check. If too many (too few) divergences are detected the percentage can be changed to reduce (increase) the number detected.
4. When using the Tick Replay with a large number of historical days (Days to Load) there may be a delay in the time it takes to initialize.
5. The indicator is installed in a folder named “Cheech”.

Please PM me with either problems or questions instead of using the comments/rating section.


Change Log

Date_______Description
2/2/2019..........Initial release
2/10/2019........Recompiled and exported using NT 8.0.17.1

NT 8 Market Replay data for CL

Contract: CL 02-19



Download instructions:

dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.

Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.

Version 1.00 January 28 2019

This is a fib channel tool I designed to help measure patterns I encountered.

More info and a template can be found at this thread
https://futures.io/elite-circle/46104-market-geometry-exploratory.html#post704789

Enjoy

Exported using Ninja Trader 64-Bit 7.0.1000.39

It's been a while since I've uploaded anything here as I've been distracted by moving my indicators over to NT-8,

As I work through that learning curve, I wanted to share one of the updates to a NinjaTrader-7 indicator I posted here some time ago.

The attached indicator was based on combining the irSessionSupportAndResistance indicator and the irLabel indicator that gave us the ability to show a price on a hand drawn "Ray"

I originally posted those here and here.

The previous version was downloaded some +1,300 times so I thought it was time to send along the updated version.

In keeping with my pet peeve, the indicator will correctly display fractional pricing when used on Treasuries contracts.

I'll be working on an NT-8 version of this in the next few days/weeks as it gets closer to the top of my list.

Trade well,

Version 1.0 January 14, 2019

The Hourly Pivots indicator applies the calculation used for daily floor pivots to intraday time frames. The indicator displays pivots for any selectable period of N minutes. All pivots are calculated from the high, low and close of the prior N-minute period. The pivots can be displayed as floor pivots, wide pivots or Fibonacci pivots. The indicator further plots the pivot range, which is a value area derived from the prior N-minute period.

The default setting of the indicator is 60 minutes. With default settings the indicator will display hourly pivots including the Main Pivot PP, Central Pivot CP, Directional Pivot DP, Pivot Range, R1, R2, R3, R4 S1, S2, S3 and S4. The first period always starts with the daily session break. Depending on the period selected, the last period of the session may terminate before completion. It will not carry over to the first period of the next session.

Pivot range: The pivot range is the range between CP and DP. It is a symmetrical range around the main pivot PP.

Prior high, low and close: The indicator also displays the high, low and close for the prior N-minute period. These levels often act as support or resistance for the consecutive N-minute period.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

This script installs as an indicator and allows users to drag their charts in any direction with a mouse. It is a feature of eSignal charting which I used for many years and simply could not live without when I moved to NinjaTrader. It is basically a rewrite of the NT7 version with the same name on this site and has been around for some time.

In truth NT8 provides this functionality already ( by holding down the Ctrl key ) but this indicator makes it that much easier by enabling it all the time.

I don't have much screen time last few years and I don't check in here that often but I will try and monitor for awhile to see that it works as expected. Leave comments in the original thread provided below.


Some Notes:

- If a chart has the Price Scale located on the Left side instead of the Right side of the chart as is normal, then you must configure ScrollsRite Scale Justification to the Left side also.

- To disable it temporarily simply uncheck the "Visible" checkbox in the ScrollsRite properties screen.

- If the Market suddenly shoots off the screen then hit the "F" icon at the top of the Price Scale to bring it back quickly.

Link to original thread:

Scrolls_Lite ( Vertical Drag/AutoScroll)
https://futures.io/ninjatrader/24723-scrolls_lite-vertical-drag-autoscroll.html