Zombie Pack 6 includes Zombie BarTimer, Zombie Candles, Zombie DM LineI/II Zombie EMA, Zombie NetPriceChange, Zombie PowerLine, Zombie PriceInfo, Zombie Setup Alerts, Zombie WaveI/II, and Zombie ZigZag indicators. Zombie DMLine, and Zombie ZigZag had significant contributions from other authors.
- Zombie6BarTimer shows the remaining time on the current bar before it closes.
- Zombie6Candles help visually identify the "buy/sell zone" as well as strong pullbacks.
- Zombie6DMLineI/II helps identify support & resistance and can draw attention early to structure change
- Zombie6EMA includes 5 different EMA period lines (8, 10, 21, 50, 200) which help identify levels and entries using the speedlines
- Zombie6NetPriceChange shows the percentage difference from previous session close price
- Zombie6PowerLine identifies the middle of a range and can draw attention early to a structure change
- Zombie6PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie6SetupAlerts shows dots for "the 50" entry setup and diamonds for the "High/Low" entry setup
- Zombie6WaveI/II shows the pullback and rollover areas
- Zombie6ZigZag highlights the market structure
September 22nd, 2021
Size: 66.03 KB
Downloaded: 409 times
2430
icedfrosty
I started an attempt here to connect UniRenko BarType with Heikin Ashi. Currently, there still seem to be problems with the calculation of the Open/Close, maybe someone can help and find the error.
Some traders use a lot of static levels that are sometimes far from current price.
Other want to always be reminded of Big Round Numbers, or quarters, halfs, etc.
Some want a mix of both.
BigConstantLines will use a starting price value (CenterLineValue) and automatically create lines 16 levels above, and 16 levels below using the AddPointsValue increments. OR, just enter each level manually leaving the CenterLineValue and AddPointsValue properties blank/zero.
One can also autopopulate and then override any level with a manually entered price. This may be a S/R level, Pivot, All Time High/Low, whatever. The indi can be added more than once in case there are some numbers from say daily/weekly/month charts that are significantly out of the current trading range, but that you want on the chart if you get there, or if you just want more than 33 levels.
Some instruments tend to move in pretty reliable patterns, say 25 handles. Pick a starting price
for CenterLineValue and enter 25 in the AddPointsValue, voila.
Note: Line17 is the CenterLine, and cannot be manually overridden when using the autopopulate mode.
(This is hack of the standard Constant Lines indicator. It's prolly gonna make your machine explode, create a new COVID variant, cause constipation, and remove all hope for whirled peas. Use at your own risk.)
Update: I've received some good suggestions. However I don't plan to implement any new features or changes, it does a certain thing well. Perhaps others will take this and add features to it, go nuts!
More than one request was for line color/thickness control. For this I suggest you add the indi to a chart, make whatever changes you want, and then save the Default template for the indi. Your custom settings will forever be saved and used on any chart you add the indi to moving forward.
Enjoy!
August 25th, 2021
Size: 4.42 KB
Downloaded: 397 times
2422
BeMoreFree
BigConstantLines v1.1
Some traders use a lot of static levels that are sometimes far from current price.
Other want to always be reminded of Big Round Numbers, or quarters, halfs, etc.
Some want a mix of both.
BigConstantLines will use a starting price value (CenterLineValue) and automatically create lines 16 levels above, and 16 levels below using the AddPointsValue increments. OR, just enter each level manually leaving the CenterLineValue and AddPointsValue properties blank/zero.
One can also autopopulate and then override any level with a manually entered price. This may be a S/R level, Pivot, All Time High/Low, whatever. The indi can be added more than once in case there are some numbers from say daily/weekly/month charts that are significantly out of the current trading range, but that you want on the chart if you get there, or if you just want more than 33 levels.
Some instruments tend to move in pretty reliable patterns, say 25 handles. Pick a starting price
for CenterLineValue and enter 25 in the AddPointsValue, voila.
Note: Line17 is the CenterLine, and cannot be manually overridden when using the autopopulate mode.
(This is hack of the standard Constant Lines indicator. It's prolly gonna make your machine explode, create a new COVID variant, cause constipation, and remove all hope for whirled peas. Use at your own risk.)
August 25th, 2021
Size: 4.42 KB
Downloaded: 79 times
2421
BeMoreFree
gbATRxMTF, Ver 1.0, TraderGB, August 15, 2021
Description:
Plots the average true range of an alternative periodicity than that of the chart (requested by jmont1).
Parameters:
* BarType : Month, Week, Day, Minute, Second, Tick, Volume, Delta (default = Minute)
* BarValue: Value to be used for BarType (default = 15)
* Period : Lookback for ATR
Zombie Pack 5 includes Zombie BarTimer, Zombie Candles, Zombie Plain Candles, Zombie CCI, Zombie DMLine, Zombie EMA, Zombie KeltnerATR, Zombie NetPriceChange, Zombie Power Line, Zombie PriceInfo, Zombie Setup Alerts, Zombie TMA Bands, and Zombie ZigZag indicators. Zombie DMLine, Zombie TMA Bands, and Zombie ZigZag had significant contributions from other authors.
- Zombie BarTimer shows the remaining time on the current bar before it closes.
- Zombie Candles help visually identify the "buy/sell zone" as well as strong pullbacks
- Zombie Plain Candles provide classic candle colors with the ability to change to candle outline and body colors
- Zombie CCI helps identify the "buy/sell zone" as well as divergence
- Zombie DM Line helps identify support & resistance and can draw attention early to structure change
- Zombie EMAs includes 5 different EMA period lines (8, 21, 50, 100, 200) which help identify the major trend and potential levels of support & resistance
- Zombie KeltnerATR shows 3 line levels above and below the 21-EMA at a distance of 1 average true range(ATR) each
- Zombie NetPriceChange shows the percentage difference from previous session close price
- Zombie Power Line identifies the upper and lower levels of a range
- Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie Setup Alerts identify Spike setups with diamonds and Bump setups with dots plus Zombie setups with dots and HalfLife setups with diamonds
- Zombie TMA Bands help with trend identification and overbought vs oversold (my preference over Keltner Bands)
Ninjatrader 8 version of my 'True Slope Indicator V5", which was for NT 7.
This indicator plots the angle between two points, in degrees, so a normal human can understand it.
In this image, one instance is plotting the slope of an implied line connecting the current close, Close[0], with the close 10 bars ago, Close[10].
The other instance is plotting the slope of an implied line connecting the current value of a simple moving average, SMA(14)[0], to its value 10 bars ago, SMA(14)[10].
Use of the indicator should be pretty self-explanatory, but I do want to mention that any negative value means slope is downward. Likewise any positive value means slope is upwards. So, even where the slope curve is rising, if it's still below zero, the slope you're measuring is descending, just not as steeply. Where the value is zero, whatever you're plotting should be horizontal at that point.
April 3rd, 2024 04:20 PM deandavis Thanks for your indicators. I can only imagine the hours you put into coding them I am looking for your gbMACD can y
ou give me a clue as to where I may find it?
Thanks
Dean
December 3rd, 2022 02:47 PM candy Very useful! Thanks!
May 9th, 2022 05:01 AM Leafcutter thanks for sharing - I´ve been looking for that since a long time - works great even with unirenko Bars.
August 19th, 2021 04:51 PM zohar thanks
August 16th, 2021 08:51 PM MrTrader Nice Indie, thanks TraderGB!!
December 9th, 2022 10:05 AM Chof So often the simplest things are some of the most helpful.. That's certainly the case with your indicator - exactly wh
at I was looking for - thank-you.
February 24th, 2022 12:46 PM j77777 Thanks so much
August 28th, 2021 09:09 PM romus Fantastic!
Especially for currencies - e.g. setting levels every 50 or 100pips
Thank you!
August 26th, 2021 05:03 AM guidoisot Thank you. An instrument with 25 points could perhaps be the case for NQ and also DAX. Maybe you can add also one plot-p
roperty for setting all plots thickness and color with one single instruction.