NinjaTrader 8 Indicators and More
futures io


Categories Help    

NinjaTrader 8 Indicators and More
Indicators and Files in this section are compatible with NinjaTrader 8


Sort by
Filter

Show full/short entries Entries
SQN - System Quality Number optimization type
This is a new optimizer type for comparing strategies in the Strategy Analyzer called System Quality Number originally devised by Van Tharpe. The formula is

SQN = sqrt(N) * average("Profit") / stddev("Profit")

where N is the number of trades, which encourages a large number of trades, a large average profit, and a small standard deviation.

To install, take SQN.cs and

1. Copy this to My Documents/NinjaTrader 8/bin/Custom/OptimizationFitnesses
2. Recompile any of your indicators or strategies -- this will cause the optimizer type to be compiled as well
3. "SQN - System Quality Number" will show up in your list of optimizer types
4. The SQN value shows up in the Performance column on the grid
 
Suggest other entries I might like
Details: SQN - System Quality Number optimization type


December 7th, 2021
Size: 2.90 KB
Downloaded: 5 times

Keywords: sqn van tharpe
SidiDailyHighsLows (v1.2)
All daily highs/lows and the intraday open are displayed with an adjustable labeled line. Already touched, previous day lines, will be removed.

The number of days to be loaded is not dependent on the loaded chart bars. This can be set by user in the UI.












--------------------------------------Update v1.1-------------------------------------------

10.Jul.2021 - OnStateChange() ⇾ State.Realtime ⇾ Order of method call changed, now triggered historical highs/lows are removed even without data connection
17.Jul.2021 - Added (IntradayHigh > dailyHighHistorical[i] / IntradayLow "greater" dailyLowHistorical[i]), now already triggered highs/lows are added to the list of highs/lows to be removed if the current day has a higher daily high/lower daily low than previous days.
21.Jul.2021 - Changed string tradingHoursName = TradingHours.Name.Contains("<Instrument") ? "Default 24 x 5" : TradingHours.Name; to string tradingHoursName = TradingHours.Name.Contains("smaller") ? "Default 24 x 5" : TradingHours.Name;
10.Aug.2021 - In realtime/replay mode, triggered dailyHighs/Lows were redrawn again on a new day. Now not only the line will be deleted from the chart, the value is also deleted from the list. RemoveTouchedHistoricalHighLow

--------------------------------------Update v1.2-------------------------------------------

02.Dec.2021 - Revise calculating intraday session values via Series now.
- Revise drawing highs/lows now via OnRender instead of using DrawingTool.
- Add some properties (ZAxis, X-Offset, Session LineWidth etc.).
- Fix problem in "AddHistoricalDailyHighLowToList()". Todays highs/lows are no longer added to the list of historical highs/lows. These were otherwise drawn twice because they are already in the list of today's daily highs/lows.

Please report bugs!!!

The *.dll reference files required to use the indicator can be loaded here ⇾
https://drive.google.com/drive/folders/12dPHQwVfGIH0naoQUIG3e35gswER4jEy?usp=sharing

Simply copy the seven*.dll into the standard directory BEFORE the *.zip file is imported.

*MyDocuments*>NinjaTrader 8>bin>Custom>Dao.ConcurrentDictionaryLazy.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>System.Management.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>netstandard.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Collections.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Essentials.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Interfaces.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>C5.dll

Important: Only for those who have installed NinjaTrader_Jim's additional drawing tool called Labeled Lines Drawing Tool
https://ninjatraderecosystem.com/use...-drawing-tool/

I have already implemented this file in my own file "SidiDrawings.cs". So if a file with the name "LabeledLines.cs" exists in the NT8 folder, please delete it, otherwise there will be an error message during the installation that says that duplicate method names are present.
 
Suggest other entries I might like
Details: SidiDailyHighsLows (v1.2)


December 4th, 2021
Size: 38.95 KB
Downloaded: 40 times

Keywords: daily dailyhigh dailylow dailyrange high highs low lows ohl ohlc open opening
ZombiePack8 Indicators 5 *
Zombie Pack 8 includes Zombie BarTimer, Zombie Candles Plain, Zombie Keltner ATR, Zombie Levels, Zombie NetPriceChange, Zombie PriceInfo, Zombie Trail, and Zombie ZigZag indicators. Zombie ZigZag had significant contributions from other authors.

- Zombie BarTimer shows the remaining time on the current bar before it closes.
- Zombie Candles Plain provide classic candle colors with the ability to change to candle outline and body colors
- Zombie Keltner ATR to help with trend identification and overbought vs oversold
- Zombie Levels includes horizontal lines for Pivot Points and Previous H/L/C
- Zombie Net Price Change shows the percentage difference from previous session close price
- Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie Wave 1 & 2 identifies pullback areas often of supply & demand zones
- Zombie Trail 1 & 2 helps to identify new micro trends (includes setup alerts and sound file)
- Zombie ZigZag helps identify swing highs & lows

Zombie8BarTimer v1.001
Zombie8CandlesPlain v1.001
Zombie8KeltnerATR v1.001
Zombie8Levels v1.001
Zombie8NetPriceChange v1.001
Zombie8PriceInfo v1.001
Zombie8Trail1 v1.001
Zombie8Trail2 v1.001
Zombie8Wave1 v1.001
Zombie8Wave2 v1.001
Zombie8ZigZag v1.001


Change Log
12/03/2021 v1.001 - Initial release


For further discussion:
ZombiePack Discussion
 
Suggest other entries I might like
Details: ZombiePack8 Indicators


December 3rd, 2021
Size: 55.81 KB
Downloaded: 47 times
Label Remover 5 *
Removes the label from all other indicators attached to that chart. Makes it so that there's no text at the top of your chart covering things up.  
Suggest other entries I might like
Details: Label Remover


December 2nd, 2021
Size: 1.37 KB
Downloaded: 27 times
SidiFootprint (v1.1) 5 *
This is a footprint chart combined with a volume profile. Most settings should be self-explanatory.
If not, or if you have any problems, please report it.

NOTES: No Tick Replay is needed! When Tick Replay is switched on, it does not work!











  • --------------------------------------Version 1.0-------------------------------------------

  • 25.Oct.2021 - Revise the whole indicator
  • - Add FootprintBarColor == VolumeProfile ⇾ in this mode, we can see a volumeprofile from left to right with color saturation based on volume.
  • - Add FootprintBarSeparatorStyle ⇾ Separator style in the fottprint bar can set between "Off", "Line", "l", "o", "x".
  • - Fixed ⇾ Footprint bar wick now no longer drawn inside the bar body.
  • 26.Oct.2021 - Add total bar volume in statistic.
  • 10.Oct.2021 - Add stacked imbalances, show in chart as rectangle, and when is broken delete it.
  • 12.Nov.2021 - Broken stacked balances can now still be displayed if selected. Own colors and transparency for active and broken levels.
  • 16.Nov.2021 - Add ZAxis property (used to assign a unique identifier representing the index in which chart objects are drawn on the chart's Z-axis (front to back ordering).

  • --------------------------------------Update v1.1-------------------------------------------

  • 01.Dec.2021 - Add some props (X-Offset canvas right, realtime render, max days to load etc.).
  • - Add intraday volume profile on the right side (each price level with total vol, bid vol, ask vol).
  • - Add vp value area values (poc, vah, val).
  • - Add price maker (price line for lastprice).

Please report bugs!!!

The *.dll reference files required to use the indicator can be loaded here ⇾
https://drive.google.com/drive/folders/12dPHQwVfGIH0naoQUIG3e35gswER4jEy?usp=sharing

Simply copy the seven*.dll into the standard directory BEFORE the *.zip file is imported.

*MyDocuments*>NinjaTrader 8>bin>Custom>Dao.ConcurrentDictionaryLazy.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>System.Management.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>netstandard.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Collections.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Essentials.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Interfaces.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>C5.dll

Important: Only for those who have installed NinjaTrader_Jim's additional drawing tool called Labeled Lines Drawing Tool
(https://ninjatraderecosystem.com/use...-drawing-tool/)

I have already implemented this file in my own file "SidiDrawings.cs". So if a file with the name "LabeledLines.cs" exists in the NT8 folder, please delete it, otherwise there will be an error message during the installation that says that duplicate method names are present.
 
Suggest other entries I might like
Details: SidiFootprint (v1.1)


December 1st, 2021
Size: 54.08 KB
Downloaded: 78 times

Keywords: ask bid bidask delta footprint imbalance profile sidi stackedimbalance volume volumeprofile vp
Market Replay CL 12-21 (NT8) - 4 of 4 1 *
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 12-21 (NT8) - 4 of 4


November 20th, 2021
Size: 7.65 MB
Downloaded: 9 times
Market Replay CL 12-21 (NT8) - 3 of 4
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 12-21 (NT8) - 3 of 4


November 20th, 2021
Size: 99.00 MB
Downloaded: 6 times
Market Replay CL 12-21 (NT8) - 2 of 4
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 12-21 (NT8) - 2 of 4


November 20th, 2021
Size: 99.00 MB
Downloaded: 6 times
Market Replay CL 12-21 (NT8) - 1 of 4
NT 8 Market Replay data for CL

Contract: CL 12-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 12-21 (NT8) - 1 of 4


November 20th, 2021
Size: 99.00 MB
Downloaded: 7 times
ZombiePack7 Indicators 5 *
Zombie Pack 7 includes Zombie BarTimer, Zombie Candles Plain, Zombie Levels, Zombie NetPriceChange, Zombie PowerLine1/2, Zombie PriceInfo, Zombie TMA Bands, Zombie Trail, and Zombie ZigZag indicators. Zombie TMA Bands and Zombie ZigZag had significant contributions from other authors.

- Zombie BarTimer shows the remaining time on the current bar before it closes.
- Zombie Candles Plain provide classic candle colors with the ability to change to candle outline and body colors
- Zombie Levels includes horizontal lines for Pivot Points and Previous H/L/C
- Zombie Net Price Change shows the percentage difference from previous session close price
- Zombie PowerLine 1/2 identifies the middle of a range and can draw attention early to a structure change
- Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie TMA Bands help with trend identification and overbought vs oversold (my preference over Keltner Bands)
- Zombie Wave 1/2 identifies pullback areas often of supply & demand zones
- Zombie Trail helps to identify new micro trends (includes setup alerts and sound file)
- Zombie ZigZag helps identify swing highs & lows

Zombie7BarTimer v1.006
Zombie7CandlesPlain v1.006
Zombie7Levels v1.006
Zombie7NetPriceChange v1.006
Zombie7PowerLine1 v1.006
Zombie7PowerLine2 v1.006
Zombie7PriceInfo v1.006
Zombie7TMABands v1.006
Zombie7Trail v1.006
Zombie7Wave1 v1.006
Zombie7Wave2 v1.006
Zombie7ZigZag v1.006


Change Log
11/17/2021 v1.006 - removed two unused files
11/16/2021 v1.005 - updated TMABand settings
11/14/2021 v1.004 - added Wave1/2
11/09/2021 v1.003 - Initial release
11/09/2021: Removed version no. on request


For further discussion:
ZombiePack Discussion
 
Suggest other entries I might like
Details: ZombiePack7 Indicators


November 9th, 2021
Size: 55.93 KB
Downloaded: 207 times
Modification of the NT* RiskReward drawing tool: display risk and reward ticks
Attached is a modification of the Risk Reward drawing tool from NT8. In addition to the functions of the tool, it also displays reward and risk in points/ticks. You may want to consider replacing the default RiskReward drawing tool in order to add this function. In order to achieve this, just add the few code lines in the render section commented "//take to RiskReward app" and copy and paste them into the script Riskreward at the respective locations. The Riskreward script is in the folder C:\Users\<user name>\Documents\NinjaTrader 8\bin\Custom\DrawingTools. Please note that this functionality will get lost with a program update, because @apps are system apps.
 
Suggest other entries I might like
Details: Modification of the NT* RiskReward drawing tool: display risk and reward ticks


October 31st, 2021
Size: 7.52 KB
Downloaded: 65 times

Keywords: drawing reward risk tool
Market Replay CL 11-21 (NT8) - 3 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 11-21 (NT8) - 3 of 3


October 26th, 2021
Size: 85.01 MB
Downloaded: 12 times
Market Replay CL 11-21 (NT8) - 2 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 11-21 (NT8) - 2 of 3


October 26th, 2021
Size: 99.00 MB
Downloaded: 12 times
Market Replay CL 11-21 (NT8) - 1 of 3
NT 8 Market Replay data for CL

Contract: CL 11-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 11-21 (NT8) - 1 of 3


October 26th, 2021
Size: 99.00 MB
Downloaded: 12 times
SidiEconomicNews (v1.2) 5 *
This is a variation of the popular jtEconNews2a -> https://ninjatraderecosystem.com/user-app-share-download/jteconnews2a/

I have adapted in to my needs, maybe others can use it to. Currently, everything works perfectly, if you have problems, please report.

Biggest changes:
  • Remove all from OnBarUpdate() and put into OnTimerTick(), now the calculations are no longer bar dependent, but time-dependent.
    Total revision layout and US/non US time format.
    Alignment now from the upper left chart window (Offset X/Y in pixel adjustable in settings).
    Button for hiding the news in the menu bar
    Holidays are now separately selectable.
    Title may or may not be displayed.
    Priority for news and alert separately selectable.
    Priority for the news/alert is now: Only highest, highest and medium, or all together.
    Fonts and colors can be set.

Update v1.1

12.Aug.2021 - Optionally, the alert message box is closed automatically or manually
16.Aug.2021 - Shows some properties only when others are enabled (RefreshProperties).
27.Aug.2021 - Problem solved, if only one news in the list and the news was outdated, the list was not deleted, so the calendar was still displayed in the chart
20.Sep.2021 - Draw vertical lines on chart for every news event, at the event date and with the event text and color.
07.Oct.2021 - Add debug mode, mode for testing only! With this mode, we can set the news event time manually.
09.Oct.2021 - We overwrite the incoming impact of the ForexFactory calendar with our own impact rules (if needed).

Update v1.2

06.Nov.2021
  • Implement new enum for selecting showing news event. Toggle through ⇒ both ⇒ only box ⇒ only lines ⇒ none.
  • Remove OnConnectionUpdate event ⇒ now the news shows also when not connected to a data provider.
  • Fix: When using a time zone (NT intern) other than the system time zone (PC), the News lines were not drawn correctly.
  • Button background color can be selected by the user depending on visibility. Left and right spacing in the taskbar can be set by the user.
16.Nov.2021
  • Add ZAxis property, used to assign a unique identifier representing the index in which chart objects are drawn on the chart's Z-axis (front to back ordering).

The *.dll reference files required to use the indicator can be loaded here ->
https://drive.google.com/drive/folders/12dPHQwVfGIH0naoQUIG3e35gswER4jEy?usp=sharing

Simply copy the six*.dll into the standard directory BEFORE the *.zip file is imported.

*MyDocuments*>NinjaTrader 8>bin>Custom>Dao.ConcurrentDictionaryLazy.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>System.Management.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>netstandard.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Collections.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Essentials.dll
*MyDocuments*>NinjaTrader 8>bin>Custom>Loyc.Interfaces.dll

Important: Only for those who have installed NinjaTrader_Jim`s additional drawing tool called Labeled Lines Drawing Tool
(https://ninjatraderecosystem.com/use...-drawing-tool/)

I have already implemented this file in my own file "SidiDrawings.cs". So if a file with the name "LabeledLines.cs" exists in the NT8 folder, please delete it, otherwise there will be an error message during the installation that says that duplicate method names are present.
 
Suggest other entries I might like
Details: SidiEconomicNews (v1.2)


October 11th, 2021
Size: 47.19 KB
Downloaded: 176 times

Keywords: eco econews economicnews news newsguard sidi sidieco sidieconews
jprBollingerBands 5 *
This is an add on to the standard Bollinger Bands Script. The enhancement allows the user to choose from any of the following Moving Averages.

EMA,
SMA,
HMA,
WMA,
DEMA,
TMA,
TEMA,
VWMA,
ZLEMA
 
Suggest other entries I might like
Details: jprBollingerBands


October 3rd, 2021
Size: 16.63 KB
Downloaded: 117 times

Keywords: average bands bollinger moving deviation
Market Replay ES 09-21 (NT8) 9 of 9 5 *
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 9 of 9


September 27th, 2021
Size: 149.57 KB
Downloaded: 49 times
Market Replay ES 09-21 (NT8) 8 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 8 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 39 times
Market Replay ES 09-21 (NT8) 7 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 7 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 39 times
Market Replay ES 09-21 (NT8) 6 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 6 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 39 times
Market Replay ES 09-21 (NT8) 5 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 5 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 38 times
Market Replay ES 09-21 (NT8) 4 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 4 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 38 times
Market Replay ES 09-21 (NT8) 3 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 3 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 36 times
Market Replay ES 09-21 (NT8) 2 of 9
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 2 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 37 times
Market Replay ES 09-21 (NT8) 1 of 9
NT 8 Market Replay data for ES

Contract: ES 09-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading ES 06-21 part 4 of 11, once that file has finished downloaded, you need to rename it into "ES 06-21.7z.004"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-21 (NT8) 1 of 9


September 27th, 2021
Size: 99.00 MB
Downloaded: 44 times
Market Replay CL 10-21 (NT8) - 3 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 10-21 (NT8) - 3 of 3


September 27th, 2021
Size: 34.30 MB
Downloaded: 21 times
Market Replay CL 10-21 (NT8) - 2 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 10-21 (NT8) - 2 of 3


September 27th, 2021
Size: 99.00 MB
Downloaded: 21 times
Market Replay CL 10-21 (NT8) - 1 of 3
NT 8 Market Replay data for CL

Contract: CL 10-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 10-21 (NT8) - 1 of 3


September 27th, 2021
Size: 99.00 MB
Downloaded: 19 times
ZombiePack6 Indicators 5 *
Zombie Pack 6 includes Zombie BarTimer, Zombie Candles, Zombie DM LineI/II Zombie EMA, Zombie NetPriceChange, Zombie PowerLine, Zombie PriceInfo, Zombie Setup Alerts, Zombie WaveI/II, and Zombie ZigZag indicators. Zombie DMLine, and Zombie ZigZag had significant contributions from other authors.

- Zombie6BarTimer shows the remaining time on the current bar before it closes.
- Zombie6Candles help visually identify the "buy/sell zone" as well as strong pullbacks.
- Zombie6DMLineI/II helps identify support & resistance and can draw attention early to structure change
- Zombie6EMA includes 5 different EMA period lines (8, 10, 21, 50, 200) which help identify levels and entries using the speedlines
- Zombie6NetPriceChange shows the percentage difference from previous session close price
- Zombie6PowerLine identifies the middle of a range and can draw attention early to a structure change
- Zombie6PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie6SetupAlerts shows dots for "the 50" entry setup and diamonds for the "High/Low" entry setup
- Zombie6WaveI/II shows the pullback and rollover areas
- Zombie6ZigZag highlights the market structure


Zombie6BarTimer v1.002
Zombie6Candles v1.002
Zombie6CandlesPlain v1.002
Zombie6DMLineI v1.002
Zombie6DMLineII v1.002
Zombie6EMA v1.002
Zombie6NetPriceChange v1.002
Zombie6PowerLine v1.002
Zombie6PriceInfo v1.002
Zombie6SetupAlerts v1.002
Zombie6WaveI v1.002
Zombie6WaveII v1.002
Zombie6ZigZag v1.002


Change Log
09/22/2021 v1.002 - Fixed reference issue with DM Line indicators
09/17/2021 v1.001 - Initial release


For further discussion:
ZombiePack Discussion
 
Suggest other entries I might like
Details: ZombiePack6 Indicators


September 22nd, 2021
Size: 66.03 KB
Downloaded: 233 times
UniRenko HA BarsType V1.0 4 *
I started an attempt here to connect UniRenko BarType with Heikin Ashi. Currently, there still seem to be problems with the calculation of the Open/Close, maybe someone can help and find the error.
 
Suggest other entries I might like
Details: UniRenko HA BarsType V1.0


September 21st, 2021
Size: 2.06 KB
Downloaded: 110 times

Keywords: heikinashi unirenko barstypes
BigConstantLines v1.1 5 *
BigConstantLines v1.1

Some traders use a lot of static levels that are sometimes far from current price.
Other want to always be reminded of Big Round Numbers, or quarters, halfs, etc.
Some want a mix of both.

BigConstantLines will use a starting price value (CenterLineValue) and automatically create lines 16 levels above, and 16 levels below using the AddPointsValue increments. OR, just enter each level manually leaving the CenterLineValue and AddPointsValue properties blank/zero.

One can also autopopulate and then override any level with a manually entered price. This may be a S/R level, Pivot, All Time High/Low, whatever. The indi can be added more than once in case there are some numbers from say daily/weekly/month charts that are significantly out of the current trading range, but that you want on the chart if you get there, or if you just want more than 33 levels.

Some instruments tend to move in pretty reliable patterns, say 25 handles. Pick a starting price
for CenterLineValue and enter 25 in the AddPointsValue, voila.

Note: Line17 is the CenterLine, and cannot be manually overridden when using the autopopulate mode.

(This is hack of the standard Constant Lines indicator. It's prolly gonna make your machine explode, create a new COVID variant, cause constipation, and remove all hope for whirled peas. Use at your own risk.)

Update: I've received some good suggestions. However I don't plan to implement any new features or changes, it does a certain thing well. Perhaps others will take this and add features to it, go nuts!

More than one request was for line color/thickness control. For this I suggest you add the indi to a chart, make whatever changes you want, and then save the Default template for the indi. Your custom settings will forever be saved and used on any chart you add the indi to moving forward.
Enjoy!
 
Suggest other entries I might like
Details: BigConstantLines v1.1


August 25th, 2021
Size: 4.42 KB
Downloaded: 147 times
Market Replay CL 09-21 (NT8) - 3 of 3 5 *
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 09-21 (NT8) - 3 of 3


August 22nd, 2021
Size: 46.56 MB
Downloaded: 22 times
Market Replay CL 09-21 (NT8) - 2 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 09-21 (NT8) - 2 of 3


August 22nd, 2021
Size: 99.00 MB
Downloaded: 17 times
Market Replay CL 09-21 (NT8) - 1 of 3
NT 8 Market Replay data for CL

Contract: CL 09-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 09-21 (NT8) - 1 of 3


August 22nd, 2021
Size: 99.00 MB
Downloaded: 22 times
gbATRxMTF 5 *
gbATRxMTF, Ver 1.0, TraderGB, August 15, 2021

Description:
Plots the average true range of an alternative periodicity than that of the chart (requested by jmont1).

Parameters:
* BarType : Month, Week, Day, Minute, Second, Tick, Volume, Delta (default = Minute)
* BarValue: Value to be used for BarType (default = 15)
* Period : Lookback for ATR
 
Suggest other entries I might like
Details: gbATRxMTF


August 15th, 2021
Size: 3.56 KB
Downloaded: 126 times

Keywords: atr mtf
ZombiePack5 Indicators 5 *
Zombie Pack 5 includes Zombie BarTimer, Zombie Candles, Zombie Plain Candles, Zombie CCI, Zombie DMLine, Zombie EMA, Zombie KeltnerATR, Zombie NetPriceChange, Zombie Power Line, Zombie PriceInfo, Zombie Setup Alerts, Zombie TMA Bands, and Zombie ZigZag indicators. Zombie DMLine, Zombie TMA Bands, and Zombie ZigZag had significant contributions from other authors.
  • - Zombie BarTimer shows the remaining time on the current bar before it closes.
  • - Zombie Candles help visually identify the "buy/sell zone" as well as strong pullbacks
  • - Zombie Plain Candles provide classic candle colors with the ability to change to candle outline and body colors
  • - Zombie CCI helps identify the "buy/sell zone" as well as divergence
  • - Zombie DM Line helps identify support & resistance and can draw attention early to structure change
  • - Zombie EMAs includes 5 different EMA period lines (8, 21, 50, 100, 200) which help identify the major trend and potential levels of support & resistance
  • - Zombie KeltnerATR shows 3 line levels above and below the 21-EMA at a distance of 1 average true range(ATR) each
  • - Zombie NetPriceChange shows the percentage difference from previous session close price
  • - Zombie Power Line identifies the upper and lower levels of a range
  • - Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
  • - Zombie Setup Alerts identify Spike setups with diamonds and Bump setups with dots plus Zombie setups with dots and HalfLife setups with diamonds
  • - Zombie TMA Bands help with trend identification and overbought vs oversold (my preference over Keltner Bands)
  • - Zombie ZigZag helps identify swing highs & lows

Zombie5BarTimer v1.007
Zombie5Candles v1.007
Zombie5CandlesPlain v1.007
Zombie5CCI v1.007
Zombie5DMLine v1.007
Zombie5EMA v1.007
Zombie5EMAHisto v1.007
Zombie5KeltnerATR v1.007
Zombie5MACD v1.007
Zombie5NetPriceChange v1.007
Zombie5PowerLine v1.007
Zombie5PriceInfo v1.007
Zombie5RSI v1.007
Zombie5SetupAlerts v1.007
Zombie5SpeedLines v1.007
Zombie5TMABands v1.007
Zombie5ZigZag v1.007


Change Log
09/08/2021 v1.007 - Added EMAHisto, MACD, RSI, SpeedLines
08/19/2021 v1.003 - Added TMA bands
08/14/2021 v1.002 - Initial release

For further discussion:
ZombiePack Discussion
 
Suggest other entries I might like
Details: ZombiePack5 Indicators


August 14th, 2021
Size: 71.59 KB
Downloaded: 280 times
SlopeAngleV1
Ninjatrader 8 version of my 'True Slope Indicator V5", which was for NT 7.

This indicator plots the angle between two points, in degrees, so a normal human can understand it.

In this image, one instance is plotting the slope of an implied line connecting the current close, Close[0], with the close 10 bars ago, Close[10].
The other instance is plotting the slope of an implied line connecting the current value of a simple moving average, SMA(14)[0], to its value 10 bars ago, SMA(14)[10].

Use of the indicator should be pretty self-explanatory, but I do want to mention that any negative value means slope is downward. Likewise any positive value means slope is upwards. So, even where the slope curve is rising, if it's still below zero, the slope you're measuring is descending, just not as steeply. Where the value is zero, whatever you're plotting should be horizontal at that point.
 
Suggest other entries I might like
Details: SlopeAngleV1


July 26th, 2021
Size: 1.75 KB
Downloaded: 170 times
ZombiePack3 Indicators 5 *
Zombie Pack 3 includes Zombie BarTimer, Zombie Candles, Zombie EMA, Zombie NetPriceChange, Zombie PowerLine, Zombie PriceInfo, Zombie Setup Alerts, and Zombie SMI indicators.
- Zombie3BarTimer shows the remaining time on the current bar before it closes.
- Zombie3Candles help visually identify the "buy/sell zone" as well as strong pullbacks.
- Zombie3EMA includes 5 different EMA period lines (8, 10, 21, 50, 200) which help identify levels and entries using the speedlines
- Zombie3NetPriceChange shows the percentage difference from previous session close price
- Zombie3PowerLine identifies the middle of a range and can draw attention early to a structure change
- Zombie3PriceInfo provides PnL for any open positions and pricing for the current instrument
- Zombie3SetupAlerts shows dots for "the 50" entry setup and diamonds for the "High/Low" entry setup
- Zombie3SMI can draw attention early to a momentum shift

Zombie3BarTimer v1.004
Zombie3Candles v1.004
Zombie3EMA v1.004
Zombie3NetPriceChange v1.004
Zombie3PowerLine v1.004
Zombie3PriceInfo v1.004
Zombie3SetupAlerts v1.004
Zombie3SMI v1.004


Change Log
07/23/2021 v1.004 - Added new High/Low scenario to Zombie3SetupAlerts
07/22/2021 v1.003 - Added Zombie3SetupAlerts
07/21/2021 v1.002 - Fixed Zombie3Candle condition issue
07/20/2021 v1.001 - Initial release


For further discussion:
ZombiePack Discussion
 
Suggest other entries I might like
Details: ZombiePack3 Indicators


July 20th, 2021
Size: 29.24 KB
Downloaded: 350 times
Market Replay CL 08-21 (NT8) - 3 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 08-21 (NT8) - 3 of 3


July 18th, 2021
Size: 9.81 MB
Downloaded: 18 times
Market Replay CL 08-21 (NT8) - 2 of 3
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay CL 08-21 (NT8) - 2 of 3


July 18th, 2021
Size: 99.00 MB
Downloaded: 17 times
Market Replay CL 08-21 (NT8) - 1 of 3 5 *
NT 8 Market Replay data for CL

Contract: CL 08-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 08-21 (NT8) - 1 of 3


July 18th, 2021
Size: 99.00 MB
Downloaded: 19 times
PCI Indicator 5 *
Percentage Chance Indicator V1.0

Plots a PPO and smoothed line normalized.




When the plots are above the 50% line, the price short term is swinging up. Vise Versa for below the line.

If the PPO is above the smoothed line, the color is Up Color otherwise Down Color.

If you see any errors, please let me know so that I can fix them!

Thanks
 
Suggest other entries I might like
Details: PCI Indicator


July 13th, 2021
Size: 8.29 KB
Downloaded: 370 times

Keywords: pci ppo
Market Replay ES 06-21 (NT8) 11 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 11 of 11


June 27th, 2021
Size: 91.09 MB
Downloaded: 49 times
Market Replay ES 06-21 (NT8) 10 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 10 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 39 times
Market Replay ES 06-21 (NT8) 9 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 9 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 36 times
Market Replay ES 06-21 (NT8) 8 of 11 5 *
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 8 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 36 times
Market Replay ES 06-21 (NT8) 7 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 7 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 35 times
Market Replay ES 06-21 (NT8) 6 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 6 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 33 times
Market Replay ES 06-21 (NT8) 5 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 5 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 32 times
Market Replay ES 06-21 (NT8) 4 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 4 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 34 times
Market Replay ES 06-21 (NT8) 3 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 3 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 37 times
Market Replay ES 06-21 (NT8) 2 of 11
Please check part 1 for full download and extract instructions.  
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 2 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 39 times
Market Replay ES 06-21 (NT8) 1 of 11 5 *
NT 8 Market Replay data for ES

Contract: ES 06-21 - Multipart download ( why are these in chunks?)









Download and extract instructions:

Note this is a multi-part download.
  • You will need to download all parts before extraction.
  • Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
  • For example, if you are downloading ES 06-21 part 4 of 11, once that file has finished downloaded, you need to rename it into "ES 06-21.7z.004"
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-21 (NT8) 1 of 11


June 27th, 2021
Size: 99.00 MB
Downloaded: 47 times
Market Replay CL 07-21 (NT8) - 3 of 3
NT 8 Market Replay data for CL

Contract: CL 07-21 - Part 3 of 3 ( why are these in chunks?)



Download instructions:

Note this is a multi-part download. Here's why

After download and before extracting you need to rename this file to
"CL 07-21.7z.003"
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.

If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 07-21 (NT8) - 3 of 3


June 27th, 2021
Size: 21.79 MB
Downloaded: 15 times
Market Replay CL 07-21 (NT8) - 2 of 3
NT 8 Market Replay data for CL

Contract: CL 07-21 - Part 2 of 3 ( why are these in chunks?)



Download instructions:

Note this is a multi-part download. Here's why

After download and before extracting you need to rename this file to
"CL 07-21.7z.002"
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.

If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 07-21 (NT8) - 2 of 3


June 27th, 2021
Size: 99.00 MB
Downloaded: 17 times
Market Replay CL 07-21 (NT8) - 1 of 3
NT 8 Market Replay data for CL

Contract: CL 07-21 - Part 1 of 3 ( why are these in chunks?)



Download instructions:

Note this is a multi-part download. Here's why

After download and before extracting you need to rename this file to
"CL 07-21.7z.001"
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.

If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay CL 07-21 (NT8) - 1 of 3


June 27th, 2021
Size: 99.00 MB
Downloaded: 18 times
gbDWAP 5 *
gbDWAP, Ver 1.0, TraderGB, June 24, 2021

Description:
gbDWAP is the Delta Volume Weighted Average Price. I was interested in what it would look like if regular volume in VWAP was replaced with the 'absolute value' of the delta volume. Note, since delta volume can be either positive or negative, the absolute value is used rather than the signed value. The Typical price is used in the calculation for this indicator.

The attached chart shows VWAP (Yellow), DWAP-BidAsk (Cyan), and DWAP-UpDownTick (Pink) side-by-side so you can see how they appear relative to one another. At this point, this indicator is only an experiment born out of curiosity and I have not studied it much to determine what value it may have, if any. My initial thought is that it adds no additional value over VWAP.

Notes:
1) Make sure you enable Tick Replay for this indicator.
2) This indicator requires that you have the NT8 OrderFlowCumulativeDelta indicator. If you have the NinjaTrader Lifetime license you should have this.

Parameters:
* DeltaType: Base the DWAP on either BidAsk or UpDownTick
 
Suggest other entries I might like
Details: gbDWAP


June 25th, 2021
Size: 2.49 KB
Downloaded: 234 times
gbPriceReferenceATR 4 *
gbPriceReferenceATR, Ver 1.0, TraderGB, June 24, 2021

Description:
Shows current price in relation to ATR reference points. The anchor point where the ATR calculations are pinned to can be the Close, High, Low, Median, Open, Typical or Weighted price of the current bar or any bar in the past. ATR calculations are always made from the prior bar to the current bar. No matter what price and bar is selected, the upper/lower reference lines are calculated by adding/subtracting half the ATR factor (ATR * MultipleATR) from the given price/bar anchor point.

Parameters:
* LookbackATR: Length for the ATR calculation (default=10)
* MultipleATR: Multiple used for ATR calculation (default=1)
* AnchorPoint: Price to use to anchor ATR calculations to (default=Median)
* BarsBack: Bar to use for anchor ATR calculations to (default=0)
 
Suggest other entries I might like
Details: gbPriceReferenceATR


June 24th, 2021
Size: 4.43 KB
Downloaded: 140 times

Keywords: atr reference
View the winning 'starred entries' gbMajorBar 5 *
Winning Entry November 1st, 2021 to December 1st, 2021 [1 votes]

gbMajorBar, Ver 1.0, TraderGB, June, 24 2021

Description:
Highlights bars with above normal range and volume.

Notes:
1) This indicator is designed to be used on bars that vary in range and volume. Thus, it is not intended to be used with bars with constant range or volume (for example, range bars or volume bars).

2) WAV files are within included zip file. You'll have to manually copy and paste these files to your sound folder within NT8 (for example, C:\Program Files (x86)\NinjaTrader 8\sounds).





Parameters:
* AverageLookback: Lookback period to determine what is normal or typical.
* DevType: Deviation type: ATR or StdDev (default=StdDev)
* RangeMultiple: Threshold multiple above normal range (min=1, default=2)
* VolumeMultiple: Threshold multiple above normal volume (min=1, default=2)

MajorBar Plot Values:
0 = not a major bar
1 = major bar up
-1 = major bar down

Included sound files for alerts (place in NT sound folder):
MajorBarUp.wav
MajorBarDown.wav
 
Suggest other entries I might like
Details: gbMajorBar


June 24th, 2021
Size: 166.88 KB
Downloaded: 226 times
Coppock indicator 5 *
NT8 Version of the Coppock indicator. This is a WMA of two ROCs.

I had to fix a path in the source. Let me know if you see any problems.
 
Suggest other entries I might like
Details: Coppock indicator


June 11th, 2021
Size: 4.63 KB
Downloaded: 114 times
gbBuySellPressure 5 *
gbBuySellPressure, Ver 1.0, TraderGB, June 4, 2021

Make sure you have Tick Replay on when using this indicator.

Description: This is the stock NT8 BuySellPressure indicator with the following modifications (requested by cshrum):
1) Re-scaled between -100 and +100 (was between 0 and 100)
2) Buy pressure appears above zero and sell pressure appears below zero
3) Changed line sytle from line to bar
4) Added addtional reference lines (+50 to +100 and -50 to -100)
5) Added divergence marker on price panel (optional)
6) Added divergence marker on pressure panel (optional)
 
Suggest other entries I might like
Details: gbBuySellPressure


June 4th, 2021
Size: 3.25 KB
Downloaded: 219 times
HorizontalTick
HorizontalTick, Ver 1.0, TraderGB, June 4, 2021

Description:
Drawing tool that draws a short horizontal line. I use this to mark off confirmed swing highs and lows, but you may find it useful for other purposes.
 
Suggest other entries I might like
Details: HorizontalTick


June 4th, 2021
Size: 3.89 KB
Downloaded: 142 times
gbStochRSIv2 5 *
gbStochRSIv2, Ver 2.0, TraderGB, July 7, 2021

Description:
This is the Stochastic RSI oscillator by Chande and Kroll. Most implementations of this indicator use only a single length for both RSI and Stochastic calculations. This implementation allows separate input for each. In addition, an input is included for weighted smoothing of the results, which is actually double smooth. The results are adjusted to range between +100 and -100. A common calculation used by Ehlers to do signal lines is employed here.

References:
* The New Technical Trader, Tushar S. Chande and Stanley Kroll, 1994, p 124-133

Updates:
2021-05-30: Added opacity for plots.
2021-07-07: (Ver 2.0) Made updates on color/opacity/alerts per request.
 
Suggest other entries I might like
Details: gbStochRSIv2


May 30th, 2021
Size: 11.57 KB
Downloaded: 204 times
gbRevEngRSITrend 5 *
gbRevEngRSITrend, Ver 1.0, TraderGB, May 29, 2021

Description:
Uses the Reverse Engineered RSI indicator to determine trend. Fifty on the RSI marks the point where the average of up closes is equal to the average of down closes. If the RSI is above this point the average of the up closes is greater that the down closes and vice versa. Instead of using 50 as the point of demarcation, this indicator accounts for noise by defining upper and lower boundaries above and below 50 (default of 52 for upper and 48 for lower). An uptrend is signaled when a low is printed above the upper boundary plot and a downtrend when a high is printed below the lower boundary plot.

Plots for standard deviation or ATR bands are an additional option that can be employed. The upper deviation plot is a multiple of the StdDev or ATR added to the upper boundary plot. The lower deviation plot uses this same deviation value and subtracts it from the lower boundary plot.
 
Suggest other entries I might like
Details: gbRevEngRSITrend


May 30th, 2021
Size: 10.87 KB
Downloaded: 373 times

Keywords: reverse rsi trend engineered
gbWRBHiddenGap 5 *
gbWRBHiddenGap, Ver 1.0, TraderGB, May, 27 2021

Description:
Wide Range Body/Bar (WRB) Hidden Gap indicator by M. A. Perry of TheStrategyLab.com (wrbtrader on Futures.io)

Note, WRB can stand for either "Wide Range Body" or "Wide Range Bar", but they are separate items:
* Wide Range Bar interval represents the price area between the High and Low...often called the range of the interval.
* Wide Range Body interval represents the price area between the Close and Open...often called the body of the interval.

Only a small percentage of WRB Hidden GAP intervals qualify as a WRB Zone.
Following the instructions in chapter 2 in the WRB Analysis Free Study Guide. -M.A. Perry






Parameters:
* Lookback: Number of bars to evaluate for wide-ness (default = 3, Range: 3 to 20 max)
* WRBType: Look for wide-ness based on: body range, bar range, or both body and bar range (default = Body)
* GapType: If a hidden gap is found, draw rectangle around: BarRange, BodyRange, or GapRange (Default = GapRange)

From Chapter 1 of the Tutorial:
WRB Analysis is an analysis of changes in volatility and supply/demand. Simply, WRB helps traders to understand and exploit changes in volatility as a way to identify key price areas where there has been an important change in supply/demand between buyers and sellers prior to the appearance of any trade signals. Thus, WRB Analysis is primarily designed to improve the understanding of the price action prior to the appearance of any trade signal and improve the performance of a trade signal strategy. In addition, WRB Analysis is not a trade signal and it must be embedded (merged) within a trade signal strategy if you want to improve the performance of your trade signal strategies.

Included sound files for alerts (place in NT sound folder):
HiddenGapUp.wav
HiddenGapDown.wav

Notes:
* Version 1.0 of this indicator is based off chapters 1-3. I don't have the advanced section of this tutorial and any additional items from there are not included.

References:
* WRB Analysis Tutorials, M. A. Perry, 2014, chapters 1-3 (free download at TheStrategyLab.com).
* There are also chapters 4-12 which are for sale at TheStrategyLab.com (advanced section of tutorial).
 
Suggest other entries I might like
Details: gbWRBHiddenGap


May 27th, 2021
Size: 126.59 KB
Downloaded: 246 times
gbAvgHiLoPivot (Important Update Ver 1.1) 5 *
gbAvgHiLoPivot, Ver 1.1, TraderGB, June, 1 2021 Thanks to BobC for testing [ Important Update Ver 1.1...see updates below ]

Description:
This is an original indicator born out of curiosity and experimentation. It simply averages the pivot swing highs as one plot and does the same for the pivot swing lows. Once adjusted, the two plots should provide a solid reference to compare price action against. The swing size is adjustable and you get to choose how many of the most recent pivots you want to average. Itís a SMA of two of the most important data points of the price structure, the swing highs and swing lows.

Parameters:
* Span: defines the swing size (default = 7). The smaller the number the smaller the swings and the larger the number the larger the swings.
* PivotsToAvg: the number of the most recent pivots to average (default = 5, range from 1 to 99).

Plots:
* AvgPivotHi is the average of the last N swing pivot highs.
* AvgPivotLo is the average of the last N swing pivot lows.
* AvgPivotHiLo is the average of both the last N swing pivot highs and lows.



If trend shading is enabled, the following trend rules apply:
* To change to an UP trend: 2 consecutive lows must print above the average swing high plot, AvgPivotHi.
* To change to an DOWN trend: 2 consecutive highs must print below the average swing low plot, AvgPivotLo.

Suggestion:
* Set Span and PivotsToAvg to where the indicator hugs the price action in an up/down trend.
* Play around with the settings to discover the indicators benefits and limitations.

Included sound files for alerts (place in NT sound folder):
AvgHiLoSwingTrendUp.wav
AvgHiLoSwingTrendDown.wav

Updates:
2021-06-01 (Ver 1.1): Corrected bug in script where array list disallowed duplicate pivot values for both pivot highs and lows. This would cause the average to be incorrect if there was say two or more pivot highs or lows with the same value within the number of PivotsToAvg.
2021-06-24: Up loaded missing WAV files (look within zip file for WAV files).
 
Suggest other entries I might like
Details: gbAvgHiLoPivot (Important Update Ver 1.1)


May 24th, 2021
Size: 243.89 KB
Downloaded: 584 times
gbVolumeReversal 5 *
gbVolumeReversal, Ver 1.1, TraderGB, May 23, 2021 [ Updated ]

Description: This was my attempt to reverse engineer through trial-and-error Mark Leibovitís volume reversal and volume sequential indicator. The calculations for this are unpublished and remain proprietary. This was first done about six years ago when I had access to the indicator with recent price action and simply messed around with price and volume until matching all the signals. Within this indicator I put a divergence signal, which is not part of Leibovitís work. I personally donít use this indicator, but some may find it useful.

References:
The Traderís Book of Volume, The Definitive Guide to Volume Trading, Mark Leibovit, 2011, p 255-262
The Encyclopedia of Technical Market Indicators, Robert W. Colby, CMT, 2003, p 778-780

Updates:
Ver 1.1, 2021-05-27: Included options for each of the two text labels be optional (requested by chartman). Note, if you have 'Show Sequential VR Text' checked but not "Show Sequential VR", Sequential VR text will not appear.
 
Suggest other entries I might like
Details: gbVolumeReversal


May 23rd, 2021
Size: 4.71 KB
Downloaded: 512 times
Market Replay CL 06-21 (NT8)
NT 8 Market Replay data for CL

Contract: CL 06-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 06-21 (NT8)


May 20th, 2021
Size: 225.43 MB
Downloaded: 32 times
gbPriceActionSwingKeltnerTrend 5 *
gbPriceActionSwingKeltnerTrend, Ver 1.0, TraderGB, May 19, 2021

Description: This is a modified version of gbPriceActionSwing requested by TraderG so it could be used in Market Analyzer. It provides a single plot called KeltnerTrend to indicate trend direction. It also colors the background based on trend direction. In addition, it provides sound alerts as an option.

If KeltnerTrend = 1 the trend is up
If KeltnerTrend = -1 the trend is down

Note, the option 'Show Plot' must be checked to show this on a chart or if using Market Analyzer.

Important Notes:
1) If you use this indicator with Market Analyzer, make sure you check 'Show Plot'.
2) If you use this indicator on a sub-panel of a chart and want to see the plot, check 'Show Plot'.
3) If you use this indicator for background color only, uncheck 'Show Post' and put it on the price-panel.

This comes with two wav files: KeltnerTrendUp.wav and KeltnerTrendDown.wav
If you choose to use these wav files, place them in the NT sound folder.
 
Suggest other entries I might like
Details: gbPriceActionSwingKeltnerTrend


May 19th, 2021
Size: 282.74 KB
Downloaded: 360 times
gbCloseOverCloseTrendMap 5 *
gbCloseOverCloseTrendMap, Ver 1.0, TraderGB, May 19, 2021

Description: Compares the current close to the closes of each of the last N-bars, where N is the number entered for Lookback. The top line of the trend map is colored green if the current close closed above the close one bar back and red if it closed below. The second line of the trend map follows the same color scheme but for two bars back, etc. This is done for N-bars back. I don't really care about a close that's the same as a close N-bars ago so I just assigned these to the downtrend.

The separate plot above the trend map is an indication of the trend. It switches to an uptrend if the current close is above all N previous closes and switches to a downtrend if the current close is below all N previous closes.

There is a separate transparent plot called TrendValue that can be used for those wanting to include this in Market Analyzer. A value of 1 indicates an uptrend and a value of -1 indicates a downtrend.






This script is dynamic with respect to the number of plots that appear in the trend map. If you enter 5 for the Lookback, you will get 5 lines in the trend map. If you enter 10, you get 10 lines, etc. The indicator allows a Lookback of 20 max, which I consider more than enough. But, if you do want more plots, feel free to modify the code to allow Lookback to take a higher max value. Keep in mind that there will be a plot for whatever number you choose. For example, if you change it to a max of 100 and enter 100 as the Lookback, you'll get 100 plots. I wouldn't go to crazy here so use whatever you think makes sense for your application of the indicator.

The order of the closes in the trend map are in descending order from the top down. This means that the top line of the trend map will be the Close status 1 bar back. The second line will be the Close status for 2 bars back, etc. The last line will always be the most distant Close. For example, if you enter 10 for the Lookback, the last line of the trend map will be the status of the current Close relative to the Close 10 bars back.

Special Note: Although this indicator has in its name "CloseOverClose" it actually uses 'Input' rather than 'Close' as the input series. What this means is that you can feed most indicators into gbCloseOverCloseTrendMap to get a trend map of that indicator. For example, instead of using Close as the input series, letís say we use the Fisher transform to get a trend map of the Fisher transform. You can do this same thing with a moving average or any other indicator that seems logical for doing this. In a generic sense, the indicator is just comparing the current output with the output of 1-bar ago, 2-bars ago...N-bars ago. The detail of all these comparisons is shown in the trend map and summarized in the overall trend plot.
 
Suggest other entries I might like
Details: gbCloseOverCloseTrendMap


May 19th, 2021
Size: 3.66 KB
Downloaded: 319 times
gbFisherTransformMTF 5 *
gbFisherTransformMTF, Ver 1.0, TraderGB, May 17, 2021

Description: Multiple timeframe Fisher transform. Option to blend chart and additional timeframes and assign weighting.

Paramters:
Period - Period for Fisher transform on both timeframes (chart and additional timeframe).

Timeframe Paramters:
Enable - Enables additional timeframe Fisher transform (default = true). If false, it uses only chart timeframe.
Bar Type - Type of bar to use: Month, Week, Day, Minute, Range, Second, Tick, Volume, Renko, Delta (default = Range)
Bar Value - Bar value to use (default = 6)
Avg with Chart Timeframe - If true, averages the chart and addition timeframe Fisher transforms (default = true)
Weight for MTF - Weight given to additional Fisher transform when blending with chart timeframe (range: 0 to 1, default = .5 which gives equal to both)

Notes:
1) Delta bars are included in this indicator but can only be used if you have them installed.
 
Suggest other entries I might like
Details: gbFisherTransformMTF


May 18th, 2021
Size: 7.92 KB
Downloaded: 215 times
gbHiLoIntradayDaily 5 *
gbHiLoIntradayDaily, Ver 1.0, TraderGB, May 11, 2021

Description: Plot of daily high, low, midpoint, and upper/lower quarters. Sounds alert when a new daily high or low is made.

Includes two WAV files: NewDailyHigh.wav and NewDailyLow.wav
This is to be placed in the NT8 sound folder (usually C:\Program Files (x86)\NinjaTrader 8\sounds).
 
Suggest other entries I might like
Details: gbHiLoIntradayDaily


May 11th, 2021
Size: 122.25 KB
Downloaded: 236 times
gbHiLoIntradayWeekly 5 *
gbHiLoIntradayWeekly, Ver 1.0, TraderGB, May 11, 2021

Description: Plot of weekly high, low, midpoint, and upper/lower quarters. Sounds alert when a new weekly high or low is made.

Includes two WAV files: NewWeeklyHigh.wav and NewWeeklyLow.wav
This is to be placed in the NT8 sound folder (usually C:\Program Files (x86)\NinjaTrader 8\sounds).
 
Suggest other entries I might like
Details: gbHiLoIntradayWeekly


May 11th, 2021
Size: 136.00 KB
Downloaded: 147 times
TickHunter Trade Bot Indicator 5 *
TickHunter is a very powerful trade bot or trade assistant that provides many features including a trade panel with several buttons useful for managing trades. Have you ever wanted to place a pending order 1 tick above or below the previous candle? Have you ever wanted to move your stop-loss to break-even and then automatically trail your stop-loss? With TickHunter, it's easy!
  • Button 1: AB.OFF (toggle auto break-even types - button color hot pink when active)
  • Button 2: Rev (reverse market position)
  • Button 3: Close/Flat (Close chart instrument pending and market orders while Flat will close all account market and pending orders)
  • Button 4: AC.OFF (toggle auto close types - button color hot pink when active)
  • Button 5: TP+ (take-profit plus moved take-profit away from market price)
  • Button 6: BE+ (break-even plus moves stop-loss to break-even initial ticks in position favor)
  • Button 7: SL+ (stop-loss plus moves stop-loss closer to market price)
  • Button 8: Pop+ (pop plus - opens buy stop order above price)
  • Button 9: Pop- (pop minus - opens sell stop order below price)
  • Button 10: Drop- (drop minus - opens sell limit order above price)
  • Button 11: Drop+ (drop plus - opens buy limit order below price)
  • Button 12: V(1) (toggle volume/contract options 1 through 5 - volume/contracts to use when using snap+/- or pop+/-)

TickHunter v1.179

Change Log
11/14/2021 v1.179 - Added ability to toggle all buttons (disabled/enabled)
11/11/2021 v1.178 - Added stop-loss combine feature
11/09/2021 v1.176 - Fixed hanging issue with Pop/Drop and added stop-loss dollars
09/28/2021 v1.175 - Fixed infinite loop when exchange rejects SL/TP
08/26/2021 v1.171 - Added CTRL TP+ will match SL with multiplier
06/14/2021 v1.170 - Added drop+/- and removed snap+/- buttons
05/13/2021 v1.167 - Fixed race condition in order handling
05/12/2021 v1.164 - Improved auto close features
05/11/2021 v1.163 - Improved threading performance
05/10/2021 v1.161 - Added ATM Strategy support
05/03/2021 v1.159 - Improved auto close features
05/02/2021 v1.158 - Added volume button with toggle features
04/30/2021 v1.156 - Fixed race condition in order handling
04/29/2021 v1.155 - Improved auto close feature
04/27/2021 v1.153 - Added pop auto jump to snap feature
04/22/2021 v1.149 - Improved button grid right margin
04/19/2021 v1.148 - Added initial stop-loss snap feature
04/15/2021 v1.145 - Added auto close features to button
04/06/2021 v1.141 - Initial release

TickHunter Indicator Settings

1) Order Management Settings
* UseAutoPositionStopLoss: enable/disable automatic stop-loss based on initial stop-loss tick/atr multiplier settings
* UseAutoPositionTakeProfit: enable/disable automatic take-profit based on initial take-profit tick/atr multiplier settings
* AutoPositionCloseType: select auto close type
** EquityCloseAllTakeProfit: closes all market positions when profit level reached
** MovingAverage1Slope: close chart instrument position when EMA 1 slope changes
** MovingAverage1SlopeMinProfit: close chart instrument position when EMA 1 slope changes & AutoCloseMinProfitDollarsPerVolume
** MovingAverage2Slope: close chart instrument position when EMA 2 slope changes
** MovingAverage2SlopeMinProfit: close chart instrument position when EMA 2 slope changes & AutoCloseMinProfitDollarsPerVolume
** MovingAverage3Slope: close chart instrument position when EMA 3 slope changes
** MovingAverage3SlopeMinProfit: close chart instrument position when EMA 3 slope changes & AutoCloseMinProfitDollarsPerVolume
* AutoPositionBreakEvenType: select auto break-even type
** AB.OFF: auto break-even disabled
** AB.OJ: auto break-even is active and will move the stop-loss to break even using trigger ticks and trigger ATR multiplier (whichever is larger)
** AB+TM3: auto break-even is active and after BE will trail the stop-loss using break-even moving average 3 (default 89-period EMA)
** AB+TM2: auto break-even is active and after BE will trail the stop-loss using break-even moving average 2 (default 21-period EMA)
** AB+TM1: auto break-even is active and after BE will trail the stop-loss using break-even moving average 1 (default 10-period EMA)
** AB+T5B: auto break-even is active and after BE will trail the stop-loss using the high or low of the 5 previous bars
** AB+T3B: auto break-even is active and after BE will trail the stop-loss using the high or low of the 3 previous bars
** AB+T2B: auto break-even is active and after BE will trail the stop-loss using the high or low of the 2 previous bars
** AB+T1B: auto break-even is active and after BE will trail the stop-loss using the high or low of the 1 previous bars
* StopLossInitialTicks: initial ticks for stop-loss
* StopLossInitialATRMultiplier: initial ticks for stop-loss based on average true range (atr)
* StopLossInitialSnap: initial stop-loss snap or initial ticks/atr - whichever is greater
* StopLossJumpTicks: ticks to jump when moving stop-loss closer to market price (holding down CTRL key and clicking SL+ button will move stop-loss to snap price of previous candle)
* StopLossInitialDollars: initial dollars for stop-loss
* StopLossInitialDollarsCombined: initial dollars for stop-loss + initial ticks + initial snap
* StopLossRefreshOnVolumeChange: recalculate stop-loss price after volume changes
* BreakEvenInitialTicks: initial ticks of profit for stop-loss when moved to break-even
* BreakEvenJumpTicks: ticks to jump in favor after stop-loss has moved to break-even
* BreakEvenTurboJumpTicks: ticks to jump in favor after stop-loss has moved to break-even (holding down CTRL key and clicking BE+ button wil activate turbo jump ticks)
* BreakEvenAutoTriggerTicks: after price moves in favor by trigger ticks then automatically move stop-loss to break-even
* BreakEvenAutoTriggerATRMultiplier: trigger ticks based on average true range (atr)
* TakeProfitInitialTicks: initial ticks for take-profit
* TakeProfitInitialATRMultiplier: initial ticks for take-profit based on average true range (atr)
* TakeProfitJumpTicks: ticks to jump when moving take-profit away from market price
* TakeProfitCtrlSLMultipler: holding ctrl while clicking TP+ will multiply the current stop-loss ticks by this value
* SnapPaddingTicks: padding ticks above high or below low of previous candle
* PopInitialTicks: initial ticks to open a pending buy/sell stop order above or below price
* PopInitialATRMultiplier: initial ticks to open a pending buy/sell stop order above or below price based on average true range (atr)
* PopJumpTicks: jump ticks to move a pending buy/sell stop order above or below price closer to market price
* UsePopAutoJumpToSnap: Enable/disable Pop auto jump feature. When enabled and Pop+/- buttons used, pending order will automatically keep jumping toward price until it reaches Snap price
* DropInitialTicks: initial ticks to open a pending buy/sell limit order below or above price
* DropInitialATRMultiplier: initial ticks to open a pending buy/sell limit order below or above price based on average true range (atr)
* DropJumpTicks: jump ticks to move a pending buy/sell limit order below or above price closer to market price
* UseDropAutoJumpToSnap: Enable/disable Drop auto jump feature. When enabled and Drop+/- buttons used, pending
* ATRPeriod: period for all atr multiplier features

2) Auto Close Settings
* AutoCloseMinProfitDollarsPerVolume: minimum dollars per volume profit level to reach before closing chart instrument position - used with MovingAverage#SlopeMinProfit
* AutoCloseAndTrailMA1Period: EMA 1 period - used with auto close button AC+M1S and auto break-even button AB+TM1 to trail stop-loss after break-even
* AutoCloseAndTrailMA2Period: EMA 2 period - used with auto close button AC+M2S and auto break-even button AB+TM2 to trail stop-loss after break-even
* AutoCloseAndTrailMA3Period: EMA 3 period - used with auto close button AC+M3S and auto break-even button AB+TM3 to trail stop-loss after break-even
* ECATakeProfitDollarsPerMicroVolume: dollars per volume profit level to reach before closing all market positions
* ECATakeProfitDollarsPerEminiVolume: dollars per volume profit level to reach before closing all market positions
* ECATakeProfitATRMultiplierPerVolume: ticks per volume profit level based on average true range (atr)
* ECAStopLossMaxDDInDollars: positon max drawdown in dollars before automatic close
* ECAStopLossEquityRemainingInDollars: close all positions when equity remaining in account at or below this level

3) Auto Entry Settings
* AutoEntryVolumeType: select auto entry volume type
** Option1: uses volume number from AutoEntryVolumeOption1
** Option2: uses volume number from AutoEntryVolumeOption2
** Option3: uses volume number from AutoEntryVolumeOption3
** Option4: uses volume number from AutoEntryVolumeOption4
** Option5: uses volume number from AutoEntryVolumeOption5
* AutoEntryVolumeOption1: volume/contracts to use when using drop+/- or pop+/-
* AutoEntryVolumeOption2: volume/contracts to use when using drop+/- or pop+/-
* AutoEntryVolumeOption3: volume/contracts to use when using drop+/- or pop+/-
* AutoEntryVolumeOption4: volume/contracts to use when using drop+/- or pop+/-
* AutoEntryVolumeOption5: volume/contracts to use when using drop+/- or pop+/-

4) Hedgehog Settings (experimental)

5) Output Log Settings (experimental)

6) Account Logging Settings (experimental)

For further discussion:

* Features that have both ticks and an atr multiplier with the same feature name prefix will use the larger of the two settings. Setting any atr multiplier feature to zero will disable it.
** Configure only one instance of TickHunter per instrument. Running more than one instance of
TickHunter on the same instrument may cause unintended duplicate actions.
*** Recommend fully exploring TickHunter's features and settings on a simulation or playback account before using it on a live account.

Use TickHunter at your own risk. Not responsible for any actions taken by TickHunter. No warranty expressed or implied.
 
Suggest other entries I might like
Details: TickHunter Trade Bot Indicator


May 3rd, 2021
Size: 38.21 KB
Downloaded: 788 times
Futures RTH Multi Market vol profile - market profile 5 *
Hello,


Here's another template I created and thought I would share.
It consists of 2 volume profiles, a 7 and 28 day profile with a daily market profile.




Must have orderflow plus for the template to work.

Unzip and place Documents > Templates > Chart
 
Suggest other entries I might like
Details: Futures RTH Multi Market vol profile - market profile


May 2nd, 2021
Size: 5.39 KB
Downloaded: 335 times

Keywords: and market profile volume
PriceInfo Indicator 4 *
PriceInfo Indicator

PriceInfo displays information about the instrument and the current position for the instrument and account. Profit and loss (PnL) includes commissions when detectable.
  • - Instrument quote (bid price)
  • - Instrument spread / previous bar size in ticks
  • - Instrument Average True Range (ATR) / $ value of 1 ATR
  • - Position PnL for account / PnL for chart instrument
  • - Position PnL for account / PnL for chart instrument
  • - Account position maintenance margin used / intraday margin used

PriceInfo v1.094

Change Log
03/31/2021 v1.094 - Initial release

For further discussion:
 
Suggest other entries I might like
Details: PriceInfo Indicator


April 27th, 2021
Size: 7.87 KB
Downloaded: 234 times
ZombiePack2 Indicators 5 *
Zombie Pack 2 includes Zombie BarTimer, Zombie Candles, Zombie Plain Candles, Zombie 21 Candles, Zombie EMA, Zombie KeltnerATR, Zombie MACD, Zombie NetPriceChange, Zombie Power Line, Zombie PriceInfo, and Zombie Setup Alerts indicators..
  • - Zombie BarTimer shows the remaining time on the current bar before it closes.
  • - Zombie Candles help visually identify the "buy/sell zone" as well as strong pullbacks
  • - Zombie Plain Candles provide classic candle colors with the ability to change to candle outline and body colors
  • - Zombie 21 Candles help visually identify the "buy/sell zone" as well as micro trends
  • - Zombie EMAs includes 5 different EMA period lines (8, 21, 34, 55, 89) which help identify the "buy/sell zone" plus an EMA stack showing which lines are positive or negative. The 21-period EMA crossing the 89-period EMA is what triggers a "buy/sell zone" change.
  • - Zombie KeltnerATR shows 3 line levels above and below the 21-EMA at a distance of 1 average true range(ATR) each
  • - Zombie MACD can draw attention early to a momentum shift
  • - Zombie NetPriceChange shows the percentage difference from previous session close price
  • - Zombie Power Line identifies the middle of a range and can draw attention early to a structure change
  • - Zombie PriceInfo provides PnL for any open positions and pricing for the current instrument
  • - Zombie Setup Alerts identify Zombie setups with dots and HalfLife setups with diamonds

Zombie2BarTimer v1.028
Zombie2Candles v1.028
Zombie2EMA v1.028
Zombie2KeltnerATR v1.028
Zombie2MACD v1.028
Zombie2NetPriceChange v1.028
Zombie2PlainCandles v1.028
Zombie2PowerLine v1.028
Zombie2PriceInfo v1.028
Zombie2SetupAlerts v1.028

Zombie21Candles v1.028
Zombie21EMA v1.028
Zombie21MACD v1.028


Change Log
06/27/2021 v1.028 - Renamed EnergyStack to MomentumStack and added FontSize property to SetupAlerts
06/25/2021 v1.027 - Added Zombie21MACD
06/23/2021 v1.024 - Updated default colors of Zombie2KeltnerATR
06/22/2021 v1.023 - Renamed Zombie21Candles to Zombie2PlainCandles & Updated Zombie21Candles to leverage micro trend rules
06/21/2021 v1.022 - Updated SetupAlerts to include "SetupWave" & added BarTimer,NetPriceChange,PriceInfo,& 21Candles
05/23/2021 v1.014 - Added KeltnerATR & PowerLine changes
05/13/2021 v1.012 - Improved line color changes
05/12/2021 v1.010 - Added MACD & improved PowerLine
04/22/2021 v1.008 - Improved setup alerts
04/16/2021 v1.007 - Added setup alerts
04/07/2021 v1.004 - Initial release

For further discussion:
 
Suggest other entries I might like
Details: ZombiePack2 Indicators


April 26th, 2021
Size: 50.78 KB
Downloaded: 589 times
AlMaCrossers Indicator (MACD and SMAs) 5 *
Hello there,

The AlMaCrossers indicator is my first attempt to build a trading bot. The logic still not finished but the indicator will signal potential entries and exits (I using it on micros and e-mini futures) that one has to assess before taking the real trade.

The indicator takes into account two other indicator types: MACD and SMA.

SMAs are 4, 8, and 15.

The algorithm will (each tick):
1. evaluate if the 4EMA has crossover the 15
2. evaluate if the MACD crossed over the signal
3. evaluate if the MACD histogram is greater than the value (parameter) specified by the user. I made this one flexible because the values vary depending on the instrument.
4. evaluate the steepness of the 4EMA which should be greater than the specified by the user.

I'm working on some other dynamic values to improve accuracy on entries and exists.

Note:
- The indicator won't generate another signal (Long nor short) until the current position is closed!
- The entry (and exit) price s plotted along with a small green (red for shorts) triangle.
- The Exit signal will plot the PnL of the trade.
 
Suggest other entries I might like
Details: AlMaCrossers Indicator (MACD and SMAs)


April 24th, 2021
Size: 9.49 KB
Downloaded: 426 times

Keywords: crossover indicator macd nt8 sma strategy
gbHeikenAshi 5 *
gbHeikenAshi Ver 1.0, TraderGB, April 23, 2021

Description: Draws heiken-ashi bars on chart.
 
Suggest other entries I might like
Details: gbHeikenAshi


April 23rd, 2021
Size: 3.22 KB
Downloaded: 331 times

Keywords: ashi heiken
Ehlers' Cycle Analytics For Traders 5 *
Ehlers' Cycle Analytics For Traders, TraderGB, April 20, 2021

Description: 18 indicators from "Cycle Analytics For Traders" by John F. Ehlers.

Notes:
1) All indicators will go to the "Ehlers" folder and will have a prefix of "jfe".
2) Only showing a few indicators on the chart. It wouldn't be practical to show all.
3) Within the script there's a description of the indicator.
4) If you really want to learn about the indicators, I suggest reading the book.
5) Doing an online search is an alternative to learning more about these indicators.








Indicator Name (page numbers)
Decycler (p 40-41)
Decycler Oscillator (p 43-44)
Band Pass Filter (p 56-57)
Dominate Cycle By Band Pass Filter (p 60-61)
Hurst Coefficient (p 67-68)
High-Pass Low-Pass Roofing Filter (p 78)
Zero Mean Roofing Filter (p 80)
Roofing Filter (p 81-82 )
Modified Stochastic (p 84-85)
Modified RSI (p 87-88)
Adaptive RSI (p 137-141)
Adaptive Stochastic (p 142-146)
Adaptive CCI (p 148-151)
Adaptive Band-Pass Filter (p 153-156)
Even Better Sinewave (p 161-162)
Hilbert Transformer (p 184-185)
Adaptive RSI Fisher Transform (p 137-141, 197)
Adaptive Stochastic Inverse Fisher Transform (p 142-146, 199)

References: Cycle Analytics For Traders, Advanced Technical Trading Concepts, John F. Ehlers, 2013
 
Suggest other entries I might like
Details: Ehlers' Cycle Analytics For Traders


April 20th, 2021
Size: 46.87 KB
Downloaded: 192 times
Market Replay CL 05-21 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 05-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 05-21 (NT8)


April 18th, 2021
Size: 249.70 MB
Downloaded: 41 times
gbTimeAlerts 5 *
gbTimeAlerts, Ver 1.1 (Updated), TraderGB, April 8, 2021 A big thanks to BobC for recommendations and beta testing.

Description: Time alerts indicator that draws vertical lines and plays sound alerts at user defined times. On intraday bar charts, both vertical line and sound alerts are available. On non-intraday bar charts, only sound alerts are available (not vertical lines).

Included with this is a WAV file that plays "Time Alert" three times, TimeAlertX3.wav.
This is to be placed in the NT8 sound folder (usually C:\Program Files (x86)\NinjaTrader 8\sounds).











Features:
1) Ability to have 6 time alerts. If you need more, you can add the indicator a second time
2) Option to enable/disable each individual alert
3) Uses TimeEditorKey for time input/validation
4) Option to display text tag for each vertical line [Label, Time, Both, None]
5) Option to vertically move (stagger) display text tag 0-100 pixels from top of chart.
6) Option to choose dash style for each alert [Dash, DashDot, DashDotDot, Dot, Solid]
7) Option to set line width between 1 and 9 for each alert
8) Option to select color and opacity for each line alert
9) Option to enable/disable sound alerts separate from line alerts for each alert.
10) Uses FilePathPicker for sound file input/validation.
11) Lines drawn across all panels on the screen, not just the host panel.
12) Sound alerts still play even if chart is inactive in background.
13) Works fully with indicator templates so you can have several versions of inputs (i.e., one for CL, another for ES, etc.)

Updates:
04-09-2021, Ver 1.1
1) Fixed XML on Opacity settings.
 
Suggest other entries I might like
Details: gbTimeAlerts


April 8th, 2021
Size: 162.36 KB
Downloaded: 256 times
gbAvgDailyRangeZones 5 *
gbAvgDailyRangeZones, Ver 1.0, TraderGB, April 7, 2021 A big thanks to BobC for beta testing.

Description: Average daily range zones based on daily ATR and percentage of standard deviation of daily ATR(1) over lookback period.

Important Note: Do NOT put this on an intraday chart with Tick Replay on. It will attempt to download 300 days of tick data. Trust me, you don't want that. It doesn't matter if you set 'Daily Bar Lookback' at a low value. If you do want to put this on an intraday chart with Tick Replay on, I suggest that you go into the code and change the second data series from 300 to something that is acceptable to you and recompile. Sorry, I didn't consider this issue during design and is something that just slipped through the testing process. My apologies.










Following are the calculations for this indicator:

Open = ETH Open
ATR = ATR(Daily, Lookback)[1]
Breadth = StdDev(ATR(Daily, 1), Lookback)[1] * StdDevBreadthMultiple (used to define zone width)

Upper Outer Zone: Open + ATR * 1.00 +/- Breadth
Upper Mid Line : Open + ATR * 0.75
Upper Inner Zone: Open + ATR * 0.50 +/- Breadth
Open Zone : Open +/- Breadth
Lower Inner Zone: Open - ATR * 0.50 +/- Breadth
Lower Mid Line : Open - ATR * 0.75
Lower Outer Zone: Open - ATR * 1.00 +/- Breadth

Features:
1) Can have up to 300 days of daily bars for calculations while only having 1-2 days of intraday bars on the chart (default=252 days)
2) Option to adjust breadth of zones with StdDev Breadth Multiple (default=.2, 0=no zones)
3) Option to show ATR% for day relative to ATR over lookback period. Also, shows days range.

Notes:
1) Only applies to intraday bar charts

Please DM me if you find any issues.
 
Suggest other entries I might like
Details: gbAvgDailyRangeZones


April 8th, 2021
Size: 8.01 KB
Downloaded: 244 times
gbAwesomeOscTimer 5 *
gbAwesomeOscTimer, Ver 1.0, TraderGB, April 7, 2021 [Updated to Ver 1.1]

Description: This is Bill Williams' Awesome Oscillator with optional vertical line increments. This was requested by @stljb on one of the forums. It's basically a MACD using simple moving averages on the Median data point. The period for the fast and slow averages is 5 and 34, respectively, but can be changed. A signal line is included which can be either a SMA or EMA.

The vertical line markers have four options: PricePanelOnly, OscillatorPanelOnly, BothPanels, and DoNotDisplay. If set, these lines will be drawn ever N bars (default = 10). The lines have a option to limit the number of lines going back.

Updates:
04-19-2021 (Ver 1.1): Disabled AutoWidth on Oscillator bar. Fixed bar and plot width settings.
 
Suggest other entries I might like
Details: gbAwesomeOscTimer


April 7th, 2021
Size: 6.31 KB
Downloaded: 229 times
ACR or Average "Clock" Range 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This indicator was inspired by the typical ATR(Average True Range). The ATR simply reports the AVERAGE range of the last n-bars.

This indicator reports the average n-bars, OF A SPECIFIC time. The ACR line will show the AVERAGE volatility of a specific CLOCK TIME. As this is all just an average, it is all calculated at the start of the session, so the Projection can be displayed for the rest of the session. I find that this lends itself to an easier planning of the day around expected movement for various instruments.

This may show users the times of day where price is most likely to move. Helpful for users that focus on larger bars.

You can put this on whatever bar size you want, but must be used on TIME CHARTS. It doesn't make much sense to put on M1 charts imo.

This indicator operates OnEachTic().

The Period sets how many days to look back to capture a range. I.e., an M30 bar @ 9:30, with a period of 5, will display the average range of of that 9:30 bar over the past 5 periods.

Configuration Days is used to get a count of the bars in session, this is mainly useful for people with unreliable data, or putting this on fast charts. Should be able to leave on default.

NOTE: This indicator builds off of your session template, and assumes each session has an equal number of bars in it. If you have custom templates where each day has a different # of bars, this indie may not be of use.

NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.

---EDIT - V2 9April2020---
Fixed Bug where the indicator was not saving properly with session or chart templates.
 
Suggest other entries I might like
Details: ACR or Average "Clock" Range


April 7th, 2021
Size: 3.82 KB
Downloaded: 151 times

Keywords: acr atr average range session
gbBollingerKeltnerSqueezeMTF 5 *
gbBollingerKeltnerSqueezeMTF, Ver 1.1, TraderGB, April 7, 2021

Description: Draws rectangle around price bars to indicate Bollinger Band / Keltner Channel squeeze based on a given timeframe.

This is a multiple timeframe version of gbBollingerKeltnerSqueeze. On the included chart you'll see both indicators. The large blue rectangle is from gbBollingerKeltnerSqueezeMTF and is based on 30-min bars. The smaller red rectangles are from gbBollingerKeltnerSqeeze and are based on the timeframe of the chart, 5-min.

Included with this are two WAV files: put these in your sound folder (usually C:\Program Files (x86)\NinjaTrader 8\sounds)
BollingerKeltnerSqueezePoint.wav
BollingerKeltnerBreakout.wav








Details:
At the point where both the upper and lower Bollinger bands enter the Keltner channel, the upper and lower rectangle points are defined and are fixed for the life of the rectangle.

A TriangleUp/TriangleDown is used to indicate the point where the squeeze starts (squeeze point). The left most point of the rectangle is also defined and fixed at this point. It draws backward based on breakTypeUsed (UseClose, UseHiLo).

If breakTypeUsed=UseClose is used, it keeps drawing the rectangle backwards until there is a close outside of the rectangles upper or lower points. If breakTypeUsed=UseHiLo is used, it keeps drawing the rectangle backwards until there is either a low that is above the
upper squeeze point or a high that is below the lower squeeze point.

This same logic is used for escaping the rectangle going forward. It keeps moving the right most point until this criteria is met. Since BB/KB are based off of lagging moving averages, a rectangle is draw backwards/forwards from the squeeze point to give context.

Note, there can be overlapping rectangles. If the criteria is met to end the rectangle, another squeeze can take place shortly after and the new rectangle will form and start drawing backwards and possible into a prior rectangle. This is normal and happens more often with
breakTypeUsed=UseClose since this is easier to achieve than breakTypeUsed=UseHiLo.

Please DM me if you find any issues.

Updates:
1) 04/07/2021, Ver 1.1: Fixed repeating sound alert.
 
Suggest other entries I might like
Details: gbBollingerKeltnerSqueezeMTF


April 7th, 2021
Size: 10.78 KB
Downloaded: 342 times
Klein Wave Volume 5 *
KleinWaveVolumeNT8, NT7 to NT8 conversion, TraderGB, April 7, 2021

Description: Klein Wave Volume indicator is used to determine supply and demand in the form of waves. This indicator is based off Wyckoff method. If you've studied under the late great David Weis, Dr. Gary Dayton or Gary Fullett, you'll probably want to have this indicator in your tool box.

It helps to identify:

1) No Supply
2) No Demand
3) Change of Behavior (COB)
4) Large Effort No Reward








No Supply: If there are 3 down waves (5 Swings) with shortening of thrust in the 3rd Wave (5th Swing) and reduced wave volume it indicates supply is withdrawn from the Market.

No Demand: If there are 3 up waves (5 Swings with shortening of thrust (SOT) in the 3rd Wave (5th swing), and reduced wave volume, it indicates demand is reduced.

COB (Change of Behavior): After continuous down or up wave, if you see large wave against the current trend (HH or LL) it indicates COB and Market is changing its trend or direction.

Large Effort No Reward:
* If there is a large Down Wave and the price did not move much compared to previous down swing and failed to make Lower Low it indicates that there was large effort to go down and there is no reward and hence market will reverse upward.

* If there is a large Up Wave and the price did not move much compared to previous up swing and failed to make Higher High it indicates that there was large effort to go up and there is no reward and hence market will reverse downward.

In general, when the wave volume is diminishing in the down swings, it indicates supply is withdrawn from market.

Same way when the wave volume is diminishing in up waves, it indicates there is no demand in the market.
 
Suggest other entries I might like
Details: Klein Wave Volume


April 7th, 2021
Size: 9.92 KB
Downloaded: 354 times
gbMovAvgX5 5 *
gbMovAvgX5, Ver 1.0, TraderGB, April 7, 2021

Description: Five moving averages with optional trend shading.

Notes:
1) This indicator was requested by one of the members on one of the forums.
2) Trend changes when fastest moving average crosses slowest moving average.
3) Choose from different averages: DEMA, DSMA, EMA, HMA, SMA, TEMA, TMA, VWMA, WMA, ZLEMA.
4) Each average can be of a different type.
 
Suggest other entries I might like
Details: gbMovAvgX5


April 7th, 2021
Size: 18.74 KB
Downloaded: 233 times

Keywords: average moving
Cumulative Delta Short Term V1 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.


This indicator will show the Cumulative Delta totals over the last 4, 5 and 6 bars as well as the delta for the current bar.

It can be used standalone but it was created primarily so that I could see "Trapped Traders" inside the congestion boxes of my Congestion Box indicator which is HERE.

Display Options:
  1. Fixed Text in the Upper Right corner for the Cum Del totals for the last 4/5/6 bars and live for the current bar
  2. Cum Del totals bar by bar with the last 4,5 and 6 bars totals below each bar and with the delta of the current bar showing above the bar
  3. Both 1 and 2 together

Pick your display choices from the properties section. If you choose Fixed Text then give your right side margin a value of at least 88.

As mentioned this can be used in conjunction with my Congestion Box (CBox) indicator to identify potentially Trapped Traders in a congestion box. If the cumulative delta of the CBox is significantly out of balance with longs or shorts then those traders may begin to get nervous as the price approaches the outer ranges of the CBox.

Images on the left will show this indicator used in a standalone manner and also with my CBox indicator. Additional images also show how it can be used to identify imbalances within congestion boxes. All of the images are from Friday March 26, 2021 (ES 06-21 / 1 minute) in the morning after the RTH open.

If you make changes to the indicator or to it's chart the indicator will reset and start from scratch.

With Congestion Box Indicator


Congestion Box Delta Imbalance


Delta Transition
 
Suggest other entries I might like
Details: Cumulative Delta Short Term V1


April 7th, 2021
Size: 3.44 KB
Downloaded: 510 times
Auto Intraday Fib Tool 5 *
I had this originally built for NT7. I recently had it updated for NT8.

It starts plotting ETH Fibs at the start of the Overnight Trading Session. It can be used on any chart type.

It starts plotting a second set of Fibs at the start of the US Session (RTH).

It also plots the HOD and LOD.

Enjoy!
 
Suggest other entries I might like
Details: Auto Intraday Fib Tool


March 29th, 2021
Size: 2.36 KB
Downloaded: 243 times
Prior Day Hi/Lo Break 4 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is a simple indicator, that plots the prior day's HIGH/LOW, and shows lines that have not yet been broken. Highs/Lows are based on your session template.

The lines are PERSISTENT, and will remain on-chart until they are broken.

You can either remove broken lines completely, or show WHERE the line was broken with the use of the User Input called "Remove Touched Lines Completely." The image shows this.

This indicator will function OnEachTic if desired, or OnBarClose.

Other inputs should be self-explanatory.

NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.
 
Suggest other entries I might like
Details: Prior Day Hi/Lo Break


March 26th, 2021
Size: 3.58 KB
Downloaded: 208 times

Keywords: day high low prior
gbChandelierStop 5 *
gbChandelierStop, Ver 1.0, TraderGB, March 24, 2021

Descriiption: Chuck LeBeau's Chandelier Stop with three modifications:

1) Drift not allowed:
* The upward chandelier stop line is not allowed to drift downward, it either stays flat or rises.
* The downward chandelier stop line is not allowed to drift upward, it either stays flat or falls.

2) Trend change:
* Two consecutive closes below an upward stop line are required to change trend from up to down.
* Two consecutive closes above an downward stop line are required to change trend from down to up.

3) There's an option to use a fixed number of ticks instead of a multiple of ATR.
* Use Ticks instead of ATR
* Number of Ticks
 
Suggest other entries I might like
Details: gbChandelierStop


March 25th, 2021
Size: 7.17 KB
Downloaded: 370 times
Market Replay CL 04-21 (NT8)
NT 8 Market Replay data for CL

Contract: CL 04-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 04-21 (NT8)


March 21st, 2021
Size: 268.14 MB
Downloaded: 42 times
Market Replay ES 03-21 (NT8) 5 of 5 5 *
NT 8 Market Replay data for ES

Contract: ES 03-21 - Part 5 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-21.7z.005"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-21 (NT8) 5 of 5


March 21st, 2021
Size: 109.85 MB
Downloaded: 106 times
Market Replay ES 03-21 (NT8) 4 of 5
NT 8 Market Replay data for ES

Contract: ES 03-21 - Part 4 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-21.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-21 (NT8) 4 of 5


March 21st, 2021
Size: 250.00 MB
Downloaded: 70 times
Market Replay ES 03-21 (NT8) 3 of 5
NT 8 Market Replay data for ES

Contract: ES 03-21 - Part 3 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-21.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-21 (NT8) 3 of 5


March 21st, 2021
Size: 250.00 MB
Downloaded: 67 times
Market Replay ES 03-21 (NT8) 2 of 5
NT 8 Market Replay data for ES

Contract: ES 03-21 - Part 2 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-21.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-21 (NT8) 2 of 5


March 21st, 2021
Size: 250.00 MB
Downloaded: 68 times
Market Replay ES 03-21 (NT8) 1 of 5
NT 8 Market Replay data for ES

Contract: ES 03-21 - Part 1 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-21.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-21 (NT8) 1 of 5


March 21st, 2021
Size: 250.00 MB
Downloaded: 72 times
Price Action Swing with Keltner Minor Trend Rule 5 *
gbPriceActionSwing Ver 1.1, TraderGB, March 23, 2021

This is a modified version of PriceActionSwing indicator that includes the Keltner Minor Trend Rule.

The minor trend turns:
(1) UP when price moves above its most recent high and stays UP until price moves below its most recent low, when it is considered to have turned DOWN.
(2) DOWN when price moves below its most recent low and stays DOWN until price moves above its most recent high, when it is considered to have turned UP.

Keltner defines an upward trend by the failure to make lower lows and a downward trend by the failure to make higher highs.

General Usage:
1) When the trend is up (background=green), you'll want to trade long on the up swings of the up trend (the Trend is Up and the Swing of the up trend is Up).
2) When the trend is down (background=red), you'll want to trade short on the down swings of the down trend (the Trend is Down and the Swing of the down trend is Down)




Suggestion Application - have three charts:
(1) Long-Term Chart: Used to get an idea of the long term trend.
(2) Intermediate-Term Chart: Used to detect the swing points turning in the same direction as the trend.
(3) Short-Term Chart: Used for entry/exit and trade management in the same direction of the trend and swing.

The screenshot shows a 30-tick range bar chart with the indicator parameters: SwingType=Standard and SwingSize=20.
The large green arrow shows the trend direction being up. The smaller green arrows show the "up swings" within the "up trend".
There are seven up swings in the ES of roughly 59, 82, 85, 102, 47, 58 and 53 points.
Looking within the up swings, there are many opportunities to get long using a lower timeframe chart.

References:
How to Make Money in Commodities, Chester W. Keltner, Keltner Statistical Services, 1960 (pages 52-54, 61-64).
The line chart on the top of page 61 clearly illustrates this rule.

Updates: Ver 1.1, 3/23/2021
1) Added independed AddOn gbPriceActionSwingBaseMethods. Some users were having issues with an existing version of PriceActionSwingBaseMethods that was different from the version that this indicator is based on.
 
Suggest other entries I might like
Details: Price Action Swing with Keltner Minor Trend Rule


March 20th, 2021
Size: 18.20 KB
Downloaded: 666 times
gbCompositeIndex 5 *
gbCompositeIndex Ver 1.0, TraderGB, March 17, 2021

This is Constance Brown's Composite Index

Formula:
Momentum(RSI(Close, 14), 9) + SMA(RSI(Close, 3), 3)

It has two parts that are added together:
(a) A 9-period Momentum on a 14-period RSI
(b) A 3-period SMA on a 3-period RSI

The result is an unbounded RSI that better catches divergences than the traditional RSI indicator.

Note: This indicator uses Input rather than Close. Thus, you can feed any indicator into this indicator (i.e., On Balance Volume, etc).




Presentation Mode Options:
(1) Traditional : Shows traditional Composite Index
(2) Traditional with Bands: Shows traditional Composite Index with Bollinger Bands
(3) ZScore : Shows Composite Index in Z-Score

References:
https://aeroinvest.com/COMPOSITE_INDEX.pdf
https://coinclarity.com/trader-education-the-rsi-is-old-use-this-instead-powerful-strategy
 
Suggest other entries I might like
Details: gbCompositeIndex


March 17th, 2021
Size: 12.17 KB
Downloaded: 133 times
gbXPointNBarsBack 4 *
gbXPointNBarsBack Ver 1.0 by TraderGB, March 16, 2021

Description:
This indicator finds the point where the current High and a Low N-bars back intersects with the current Low and a High N-bars back (forms an X). It creates a synthetic data point that can be feed into other indicators. Think of it as a substitute for common inputs such as: High, Low, Open, Close, Median, Typical, Weighted. Although some may use this as an indicator on its own, its really meant to be feed into other indicators. Experiment with it and see where it takes you.

The screenshot tries to illustrate the X (cross) point where BarsBack=1 and BarsBack=2.

Enjoy,
TraderGB
 
Suggest other entries I might like
Details: gbXPointNBarsBack


March 16th, 2021
Size: 2.04 KB
Downloaded: 134 times

Keywords: xpoint
gbMACDx5 4 *
gbMACDx5 Ver 2.0, TraderGB, April 3, 2021 (New Version)

Description: Five MACDs with different fast lenghts and one common slow length.

Histogram Coloring Scheme:

Historgram changes to uptrend color when in an upward perfect order:
Macd1 > Macd2 and Macd2 > Macd3 and Macd3 > Macd4 and Macd4 > Macd5

Historgram changes to downtrend color when in a downward perfect order:
Macd1 < Macd2 and Macd2 < Macd3 and Macd3 < Macd4 and Macd4 < Macd5







Macd over Macd coloring scheme:

Macd plot changes to uptrend color when it's above the next lower Macd plot:
Macd1 > Macd2
Macd2 > Macd3
Macd3 > Macd4
Macd4 > Macd5

Macd plot changes to downtrend color when it's below the next lower Macd plot:
Macd1 < Macd2
Macd2 < Macd3
Macd3 < Macd4
Macd4 < Macd5

Option to display date/day

Update:
Ver 2.0 04-03-2021: Changed plot and histogram trend coloring scheme.
 
Suggest other entries I might like
Details: gbMACDx5


March 14th, 2021
Size: 7.83 KB
Downloaded: 454 times
market profile - 4 *
Hello,


In a podcast I was listening to earlier this week from Anthony Crudele titled "Mastering your trade setups with Damon Pavlatos" Damon spoke about his market profile and how he uses 3 separate colors reflect sessions vs. 30m blocks.

It can be found here


I thought I would try something similar with NT8 and share it.
The items can be found in NT8's Orderflow plus.

The Volume profile for this image is a 7 day and weekly pivots. ( he doesn't use pivots, I'm a fan)

After downloading and unpacking, install into the Documents > NinjaTrader 8 > Templates > chart

Thanks,
Brett

PS. The times could probably be cleaned up a bit, but should be a good start.

*** Yeah, Typo when I named the Tab, just rename it. ***
 
Suggest other entries I might like
Details: market profile -


March 14th, 2021
Size: 6.16 KB
Downloaded: 417 times
gbRMMA 5 *
gbRMMA (Ver 1.0) by TraderGB

This is a very modified version of the original Rainbow Multiple Moving Average (RMMA). It allows many averages of a given type based on user input.

Modifications:
1) Put input parameters within indicator (original indicator got input params from file).
2) Added more moving averages/filters to choose from.
3) Added deviation bands where you can choose between StdDev or ATR and multiples for bands 1/2/3.
4) Added mid-point plot of all averages. StdDev/ATR bands are based off this central point.
5) Ability to hide average lines.
6) Ability to color averages based on Up/Down colors or use Rainbow colors.
7) Ability to color background based on these trend rules:
* SlopeFull - Looks for all averages trending in the same direction before flipping trend direction.
* SlopeHalf - Looks for the number averages rising vs falling to determine trend direction.
8) Ability to show/hide the mid-point.
9) Ability to color bars based on if close is above/below mid-point.
10) Ability to show/hide bands.
11) Many color/opacity options.
 
Suggest other entries I might like
Details: gbRMMA


March 12th, 2021
Size: 88.74 KB
Downloaded: 215 times

Keywords: average moving rainbow rmma
gbTimeSeriesForecastPosNeg 5 *
gbTimeSeriesForecastPosNeg (Ver 1.1) by TraderGB, March 8, 2021

In the process of coding gbMAxMTFx4, I had to go through each average/filter indicator that this script called and see what the minimum value was for length. To my surprise the stock Time Series Forecast (TSF) that comes with NT8 allows the Forecast input to be negative down to -10. I thought that was interesting and is what inspired this indicator.

Concept:
The basic idea here is to plot both a positive and negative time series forecast for a given length. It follows this rule for trend:
* Trend changes to UP when both positive and negative TSF rise together.
* Trend changes to DOWN when both positive and negative TSF fall together.

Input:
* PosForecastValue can be an integer between 1 and 10.
* NegForecastValue can be an integer between -1 and -10.
* Usually you'll want to have the same pos/neg forecast value, one positive and one negative (i.e., 3 and -3). But, this indicator allows you to input different values for this (i.e., 3 and -4).

Options:
There are many options on how you choose to decorate this indicator:
* Allows color/opacity rising or falling for plots, shade area, bar body, bar outline, background, and hi/lo line.
* Hi/Lo Lines are just the lines that extend to the right of both the TSF plots.
* Option to turn on/off coloring for plots, shade area, and bars.
* Hi/Lo lines have options to turn on/off, line style, and line width.

Updates:
Ver 1.1 (03/19/21): Fixed bug with saving template
 
Suggest other entries I might like
Details: gbTimeSeriesForecastPosNeg


March 8th, 2021
Size: 6.85 KB
Downloaded: 342 times
T3Slope 5 *
Hello Traders, a trader that downloaded the EMASlope indicator asked if the same slope color scheme could be added to the T3 indicator. The T3 is considered a swing indicator which is suitable for all timeframes and trading instruments including forex, stocks, commodities, cryptocurrencies, indices, etc. Presented in 1998 by Tim Tillson, it is also known as the Tillson Moving Average. It was developed to minimize false signals that are common with other MA's... Some traders trade PA above/below, and the more conservative will trade with the slope and PA above/below

Shown is the T3Slope with Period = 55, Tcount 7 and VFactor0.7 on a 144Tick YM Chart.
The slope color in this case, changes at +/-15 degrees and +-45 degrees. The colors can be selected to only change for upslope and downslope or for degress as shown. The background can be set to show slope dependent color and opacity. There is also a button to disable the indicator located on the Time axis. The button has the indicator name and Period on its face. Also there is a label in the right margin that colors with the indicator. All parameters are user selectable

Give it a spin and leave a comment...
Trade Well
Bob
 
Suggest other entries I might like
Details: T3Slope


March 6th, 2021
Size: 6.86 KB
Downloaded: 234 times
Second Entry Indicator V2.1 4 *
Please post any bugs/feedback you may have in this thread. It also includes more details.

Not 100% sure it counts correctly 100% of the time but so far back tests look promising! It counts it in Mack's style.


Features:
  • Counting Second Entries
  • Counting Other Entries
  • Future Signal and Risk display
The indicator is highly adjustable so that it can fit for other instruments as well


Parameters:
  • Target: Shows where the future signal will draw the target.
  • Max Stop: will change the risk to turn magenta if risk exceeds max stop.
  • Entry Placement: Useful for other instruments. Will only count as an entry if the price is greater than/less than the previous bar's high/low plus the amount of ticks set here.
  • Stop Placement: Distance from signal bar your stop will be placed.
  • Margin: Distance from bar the indicator is drawn.
  • Reset count on DT/DB: allows for the count to reset whenever a double top or double bottom forms
  • Longs on top/shorts on bottom: Flip placement of entry text
 
Suggest other entries I might like
Details: Second Entry Indicator V2.1


March 6th, 2021
Size: 29.21 KB
Downloaded: 354 times
gbMAxMTFx4 5 *
Script: gbMAxMTFx4 (Ver 1.0 by TraderGB, March 2021) Corrected Entry

Description: This indicator will draw four moving averages/filters based on user input. It is mainly used to draw higher frame moving averages/filters on lower frame charts to give reference to market condition (trending, consolidating, etc) from the higher frame perspective. Four averages are used to give some clarity of this. The indicator allows you to choose
from several bar types and averages/filters (see below).

Installation: This file contains four bar types that require a restart of NT after being imported. Bar types are: Reversal, Delta, BetterRenko, and UniRenko. If you already have these, just skip over them during the import. Included in the zip file are many indicators. If you have made any customizations to any of these named scripts, you should consider skipping that particular indicator when it prompts you to [skip or overwrite]. If you have made changes and you overwrite, your custom code is gone. You may want to make a backup copy of your indicator directory before you import just to be on the safe side. You only have to worry about this if the name of a script in this zip file matches one you already have.

Available Bar Types (* non-standard NT bar types; requires installation and restart NT):
Month, Week, Day, Minute, Range, Second, Tick, Volume, Renko, (* Reversal, Delta, BetterRenko, UniRenko)



Updates:
1) The following are set to false. You may want to set them to true and recompile:
IsAutoScale = true;
DrawHorizontalGridLine = true;
DrawVerticalGridLines = true;
Available Moving Averages/Filters:
AdaptiveExponentialMA, AdaptiveLaguerreFilter, AhrensMA, AverageDirectionalVariableMA, AutoRegression, ArnaudLegouxMA, Butterworth_2Poles, Butterworth_3Poles, DonchianChannelMean, DoubleExponentialMA, DistantCoefficientFilter, DeviationScaledMA, ExponentialHullMA, ExponentialMA, ElasticVolumeWeightedMA, GaussianFilter_2Poles, GaussianFilter_3Poles, McGinleyDynamic, HeikinAshiZeroLagTripleEMA, HullMA, HoltEMA,JurikMA, KaufmanAdaptiveMA, LaguerreFilter, LinearRegression, MovingMeanTPO, MovingMeanVWTPO, MovingMedian, MovingMedianTPO, MovingMedianVWTPO, Percentile_50, RangeWeightedMA, ReverseEngineeredRSI_50, SimpleMA, SineWeightedMA, SuperSmoother_2Poles, SuperSmoother_3Poles, Tillson3MA, TimeSeriesForecast, TripleExponentialMA, TripleWeightedMA, TriangularMA, VariableIndexDynamicAverage, VariableIndexDynamicAverageCMO, VolumeWeightedEMA, VolumeWeightedMA, WeightedMA, ZeroLagExponentialMA, ZeroLagTripleExponentialMA

Primary Input Parameters:
1) Bar Type (see gbMAxMTFx4_BarTypeEnum enum for list of available bar types)
2) Bar Value
3) Moving Average Type (see gbMAxMTFx4_MATypeEnum enum for list of available averages and filters)
4) Four Moving Average Lengths (Period 1, 2, 3, 4)

Non-Standard NinjaTrader Bar Types Used (you'll need to install these if you don't already have them):
1) Reversal Bars
2) Delta Bars
3) BetterRenko Bars
4) UniRenko Bars

UniRenko Parameters: If using a UniRenko Bar, you'll need to specify the Bar Values in the "Parameters - UniRenko" area.
1) Tick Trend
2) Tick Reversal
3) Open Offset

Limitations:
1) This indicator is not intended to have a frame less that the host chart. This should not present any runtime issues, but be mindful that plots are displayed based on the frame used by the host chart. Thus, if price goes up 10 points and then down 10 points before the host chart bar closes, you're not going to see this. The proper
way to use this indicator is with a higher frame than the host chart (i.e., 10 min indicator on 1 min chart, etc).
2) Most averages require a minimum of 1 period, except for: DeviationScaledMA (2), Holt EMA (2), Kaufman Adaptive MA (5), Linear Regression (2), Percentile (4). If you enter a value less that the minimum, the script will use the minimum but display what you used as input.
3) This script uses averages/filters that mostly use Length as there main input. Indicators such as MAMA and iTrend were not included since they don't use Lenght as an input.
4) Default values are used for parameters in some averages/filters that require more than Length as input, such as: Arnaud Legoux Moving Avg, Butterworth Filter, Deviation Scaled MA, Gaussian Filter, Jurik MA, KaufmanAdaptiveMA, Percentile, Reverse Engineered RSI, and Tillson3 MA.
5) Some averages/filters require a short and long term period as input (i.e., VariableIndexDynamicAverage). In these cases the Length is used as the short-term period and the long-term period is three times the Length.
 
Suggest other entries I might like
Details: gbMAxMTFx4


March 5th, 2021
Size: 122.79 KB
Downloaded: 241 times
gbKalmanFilter 5 *
The Kalman filter is an algorithm that uses a series of measurements observed over time, containing statistical noise and other inaccuracies. It was originally devised to work with noisy and incomplete data. Mainly designed for and applied in dynamic systems... such as price data on charts.

Details: https://en.wikipedia.org/wiki/Kalman_filter

The screenshot contains two identical price charts (Range Bar 10). It shows the Kalman Filter with different gain settings:

Gain = 20 Pink
Gain = 200 Yellow
Gain = 500 Cyan
Gain = 1000 Red

Enjoy,
TraderGB
 
Suggest other entries I might like
Details: gbKalmanFilter


March 5th, 2021
Size: 1.72 KB
Downloaded: 267 times
Sim22_DeltaV4 5 *
Kudos to Gomi, Sim22 and Zondor for this excellent Cumulative Delta indicator. It was modified per NitroG's request so that it would work in NT8 version 8.0.23.1.

On import the indicator will be stored in the Sim22 folder and as Sim22_Delta4 and should not interfere with Sim22_Delta3.

Make sure you have Tick Replay on when using this indicator.

Please let me know if you run into any issues.

Enjoy,
TraderGB
 
Suggest other entries I might like
Details: Sim22_DeltaV4


March 4th, 2021
Size: 12.67 KB
Downloaded: 335 times

Keywords: cumulative delta
gbZigZagFibExtRet (Important Update Ver 1.2) 5 *
gbZigZagFibExtRet, Ver 1.2, TraderGB, March 21, 2021 [Important Update Ver 1.2...see updates below]

Description:
This is a modification of the ZigZagUTG script that shows Fibonacci retracement and/or extension percentages. The indicator allows you to choose what you want to see (Show Text: None, Retracement, Extension, Both). There are also different options for how you what the indicator to appear on the screen (color, opacity, line width, text offset, show lines in front or behind bars, show: dots, lines, both or none).

Updates:
2021-03-21 (Ver 1.1): Added developing current swing retracement/extension percentages.
2021-06-01 (Ver 1.2): Corrected bug in script where array list disallowed duplicate pivot values. This would cause a miscalculation of the percentage values where there are back to back swing highs or lows with the same value.
 
Suggest other entries I might like
Details: gbZigZagFibExtRet (Important Update Ver 1.2)


March 4th, 2021
Size: 5.26 KB
Downloaded: 491 times
Sody's Zero Lag Moving Average Convergence Divergence (MACD) 5 *
This is my entry to the challenge for the best indicator. While this indicator is nothing flashy like my past indicators, I am submitting it due to the fact that it is a reliable signal.

It is a MACD but calculated using a momentum-adjusted moving average that I call a zero-lag moving average because it is the closest thing I can get to that adjust for the lag in a filter. It works similar to a EMA, but instead of weighting the front end of the indicator to reduce lag (base effect), it adjusts the from on the moving average for a near-term ROC (momentum).

Use wisely!

Cheers,
Sody

APR 26 2021 UPDATE: It came to my attention that the file was a locked DLL, I have corrected the issue, you can now download the source code from here.
 
Suggest other entries I might like
Details: Sody's Zero Lag Moving Average Convergence Divergence (MACD)


February 22nd, 2021
Size: 3.35 KB
Downloaded: 941 times
Market Replay CL 03-21 (NT8)
NT 8 Market Replay data for CL

Contract: CL 03-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 03-21 (NT8)


February 21st, 2021
Size: 218.57 MB
Downloaded: 27 times
LargeTrades indicator NT8 4 *
Email me for improvements or suggestions

I use it in one of my autostrategies with success. The basic code comes from a Russian expert.
Combined with some trend direction indicator is a powerful tool to see the supply / demand.

Displays the major transactions that have taken place during
short period of time and at the same price (Limit buyer / seller)

Default settings to adjust :

LargeVolume = 500; (adjust to your instrument)
TradeTime = false; (if true plot date/time of large trade)




Trade safe

bcomas
 
Suggest other entries I might like
Details: LargeTrades indicator NT8


February 21st, 2021
Size: 2.90 KB
Downloaded: 523 times
Commitment of Traders (COT) 5 *
There is no real download here (the attached file, "cot.txt", is just a dummy file in order to satisfy the requirements of adding an entry).

Just want to highlight the stock Commitment of Traders (COT) indicator that comes with NT8 and how to set it up. emazing was requesting this and didn't know that it was already available. I'm putting it here to alert everyone of this indicator and how to set it up.

For full information, see: https://ninjatrader.com/blog/track-institutional-trading-with-new-cot-indicator

Setup:
1) Go to: Tools -> Options -> Market data
2) Once there, click on: Download COT data at startup
3) After doing this, restart NT.
4) Add the COT indicator to a weekly chart (Released every Friday at 3:30pm by the Commodity Futures Trading Commission)

Included here is a weekly chart with the COT indicator.

TraderGB
 
Suggest other entries I might like
Details: Commitment of Traders (COT)


February 20th, 2021
Size: 25 bytes
Downloaded: 77 times

Keywords: cot commitment
RSI With 4 User Defined Zones 5 *
This script was requested by @Mtype for Ninja Trader 8 -


It is an RSI oscillator with a smoothing moving average. Four zones are drawn with user selectable colors and opacity. The zone sizes are also user defined.

This will give you a quick visual idea on the location of the RSI, among other things.

It can be combined with other indicators, such Stochastics and CCI, by using Transparent colors for the built in RSI indicator.
 
Suggest other entries I might like
Details: RSI With 4 User Defined Zones


February 15th, 2021
Size: 5.81 KB
Downloaded: 298 times

Keywords: rsi zones regions
Multi Volume profile template with trend 4 *
I've updated the Multi-Volume profile template.

Included is a 1, 7 and 30 day profile.
Added to this version are the Daily and Weekly pivots, along with the TrendGRaber that forrestang posted on 1.22.21 (included in zip)

All other indicators are available through the NT8 lifetime license platform.


I should mention: When unzipping for the template: place the Futures.I.O..xml into the Documents>NinjaTrader8>Templates> Chart.

For the trendgrabber indicator, place it in Documents>NinjaTrader8>import

Thanks,
Brett

Edit: Added instructions for placement and had the wrong indicator in the zip.
Edit 3.28.21: uploaded new template for 8.0.21.0 build - DM me if it's not working. I really don't check my uploads.
 
Suggest other entries I might like
Details: Multi Volume profile template with trend


February 14th, 2021
Size: 6.46 KB
Downloaded: 570 times
SSL Channel 5 *
Version 1.00

I've seen this indicator on many other platforms but not NinjaTrader. in general, it plots the SMA of the Highs and Lows of the bars to display trend, and possible changes.

I use it in 2 ways (both are pictured). The most common is on the chart with the primary data series. I generally set colors for just Up and Down with the other 3 Transparent. Mid and Max may be used here.

For the second mode, use it in a new pane and set all plots to transparent except SSLDir but make it plot as a bar and the appropriate width.

I have found a setting around 10 works pretty good for time-based charts and around 4 for fixed-height (renko, range) charts.
 
Suggest other entries I might like
Details: SSL Channel


February 8th, 2021
Size: 3.19 KB
Downloaded: 401 times
Bollinger/Keltner Squeeze (Ver 1.1) 5 *
gbBollingerKeltnerSqueeze, Ver 1.0, TraderGB, February 6, 2021 [Updated to Ver 1.1]

Description: Draws rectangle around price bars to indicate squeeze.

At the point where both the upper and lower Bollinger bands enter the Keltner channel, the upper and lower rectangle points are defined and are fixed for the life of the rectangle. A TriangleUp/TriangleDown is used to indicate the point where the squeeze starts (squeeze point).

The left most point of the rectangle is also defined and fixed at this point. It draws backward based on BreakTypeUsed (UseClose, UseHiLo). If BreakTypeUsed=UseClose is used, it keeps drawing the rectangle backwards until there is a close outside of the rectangles upper or lower points. If BreakTypeUsed=UseHiLo is used, it keeps drawing the rectangle backwards until there is either a low that is above the upper squeeze point or a high that is below the lower squeeze point. This same logic is used for escaping the rectangle going forward. It keeps moving the right most point until this criteria is met. Since BB/KB are based off of lagging moving averages, a rectangle is draw backwards/forwards from the squeeze point to give context.

Note, there can be overlapping rectangles. If the criteria is met to end the rectangle, another squeeze can take place shortly after and the new rectangle will form and start drawing backwards and possible into a prior rectangle. This is normal and happens more often with BreakTypeUsed=UseClose since this is easier to achieve than BreakTypeUsed=UseHiLo.



Updates:
Ver 1.1 04-19-2021:
1) Fixed XML settings on Opacity
 
Suggest other entries I might like
Details: Bollinger/Keltner Squeeze (Ver 1.1)


February 6th, 2021
Size: 10.02 KB
Downloaded: 638 times
FisherHistogramWave 5 *
Hello Traders, this indicator is one of my favorites. The fisher indicator is basically a histogram that tells you what the trend is at the moment. User controls include Period for the indicator, Price Candle outline colors, background color and opacity, histogram wave color and opacity, histogram bar colors, and the Buy-Sell Sound Alert. As with many of my indicators, it only calculates what is shown on the screen to save calculations. If you scroll back, hit f5 to refresh the indicator.

Trade Well...
Bob

R1 2/11/2021: I don't use Bloodhound or other automated tools, but one user found that this indie does not work with Bloodhound. I found that the problem is with the calculations limited to what is on screen... I found the issue and it is an easy fix. In the zip are two indicators. FisherHistWav is the original that only calculates what is on the screen and FisherHistWavFull calculates the entire history and works with Bloodhound. I will add a new version of all of the indicators that I have posted that have the calculation limiter in a similar manner.
 
Suggest other entries I might like
Details: FisherHistogramWave


February 6th, 2021
Size: 14.17 KB
Downloaded: 795 times
Growing Your Account Worksheet 5 *
This is not a NinjaTrader indicator but rather an Excel spreadsheet. I created it a long time ago and thought it might be useful to share.

It will help traders to let them see how they can grow their accounts over almost a one year time frame.

There are 3 sheets, Inputs, Details and Options (see the tabs at the bottom of the first page).

On the Inputs sheet there are 6 different cells with blue backgrounds for you to complete.
They are all drop-down lists that are activated by clicking the cell and then the down arrow.
  1. Choose Contract - either ES, GC, NQ, MES or MNQ
  2. Initial Number of Contracts to Trade - a value from 1 to 10
  3. Net Tick Target Per Day Per Contract - a value from 1 to 100
  4. Initial Account Size - from $3,000 to $20,000
  5. Increase Contracts by 1 after What Increase in Account Size - from $3,000 to $20,000
  6. Pay Yourself How Much Every Friday? from $0 to $5,000

At the bottom of the Inputs sheet you will see the initial results and below that the results after every 10 weeks.

If you click on the Details sheet you will be able to see the weekly results for almost 1 year.

Each sheet is protected. The password is charles after the late Charles Cochran from Inside Edge Trading.
 
Suggest other entries I might like
Details: Growing Your Account Worksheet


February 5th, 2021
Size: 24.03 KB
Downloaded: 338 times
Moving Average Cross Over Background Color - v1.3 5 *
This indicator was created at the request of @ssubterfuge


This indicator displays a change in chart background color when two moving averages of your choice cross over. Or you can choose to display a shaded rectangle instead of the chart background color shading. A third option is that you can display both, the background and the rectangle shading simultaneously.

You can select an offset, by a number of bars, to start displaying after the moving averages have crossed.

There is an option to plot the moving averages selected.

The available moving averages you can select include:
EMA,
SMA,
HMA,
WMA,
DEMA,
TMA,
TEMA,
ZLEMA,
VMA

UPDATED (2021 Feb 11 - Version 1.1): Allow you to select one moving average type for the slow MA and a different moving average type for the fast MA.

UPDATED (2021 Feb 15 - Version 1.2): Added VMA to the list of available moving average types.

UPDATED (2021 Mar 11 - Version 1.3): Added KAMA & MAMA to the list of available moving average types.
 
Suggest other entries I might like
Details: Moving Average Cross Over Background Color - v1.3


February 4th, 2021
Size: 23.46 KB
Downloaded: 491 times

Keywords: average background color crossover moving
Congestion Box CustomV1 ( CBoxCustomV1 ) 5 *
Note: If you find bugs, have feature requests, or anything else, please post here:


Many thanks to the creator of the Congestion Box for Range Bars, jabeztrading, who posted his NT7 indie on FIO 10 years ago next month. Since that time a few traders, especially BobC, have continued to update and add functionality to the new NT8 version.

This customization:
  • adds selectable minimum number of bars for your CBox
  • adds selectable maximum tick differential between the Open and Close of your CBox bars
  • adds a diamond shape at double tops and double bottoms of your bars
  • adds a diamond shape at your choice of ticks above/below CBox to show a break up or break down to a specific level
  • adds selectable sound alerts (adaptation from BobC again) for
:
initial formation of your CBox
double tops and double bottoms
warning of a breakout 1 tick above or below CBox boundaries
  • double top and double bottom markers are done with purple and pink diamonds respectively
  • your break up and break down confirmation markers are done with green and blue
diamonds respectively.

Congestion boxes settings will vary from instrument to instrument. You will probably have experiment with the settings until you find what you want for your instrument. There will be some discussion at the thread above regarding how I use CBoxes in my trading.
 
Suggest other entries I might like
Details: Congestion Box CustomV1 ( CBoxCustomV1 )


February 2nd, 2021
Size: 8.28 KB
Downloaded: 660 times

Keywords: box custom top congestion double bottom
EMASlopeBands 5 *
I added bands to the EMASlope indicator. The bands are calculated from the volatility of the candles. The user sets a multiplier for the bands. In this pic the EMA is set to 34 and the multiplier is set to 1.57 (Pi/2). You can see that in the churn areas, the price stays within the channels of the bands until it breaks out.

Features:
Set the color of EMA and Bands according to slope (30 and 60 degrees in pic)
You can color the background according to the slope of the EMA (shown at 20% opacity).
The distance (ticks) from top band to bottom band is displayed on the screen.
Button on axis to hide the plots, allowing several EMA with different periods to show or not.
EMA Period and Band multiplier shown in button. Title shows EMA period with indie name.

R1: 3/10/21: Added margin label font size control to user panel per request from JC195461.

Trade Well...
Bob
 
Suggest other entries I might like
Details: EMASlopeBands


January 27th, 2021
Size: 7.08 KB
Downloaded: 506 times
MarketRetrace 5 *
This indie looks at yesterdays High and Low and todays High and Low. It paints yesterdays High and Low on todays chart, as well as the mid and RMS values of yesterdays High and Low. The RMS values are estimated as 70.7% and 29.3% for a sine wave. It also paints todays High and Low. These values can be interesting turning points. All levels are labeled in the right side margin (I recommend a margin of 100). I posted a similar indie in NT7 called Pivots Plus that was very popular . This one does not have the pivots included, you can add that to the chart. This one does have a button to hide the indie if you want to declutter your chart.

Here is the wiki definition of RMS...
In mathematics and its applications, the root mean square (RMS or rms) is defined as the square root of the mean square (the arithmetic mean of the squares of a set of numbers).[1] The RMS is also known as the quadratic mean[2][3] and is a particular case of the generalized mean with exponent 2. RMS can also be defined for a continuously varying function in terms of an integral of the squares of the instantaneous values during a cycle.

I hope that you find it interesting....

Trade Well...
Bob
 
Suggest other entries I might like
Details: MarketRetrace


January 27th, 2021
Size: 5.88 KB
Downloaded: 506 times

Keywords: high low pivots rms
EdsLevel2CustomV1 5 *
As Sim22 said in his excellent Eds Level2 V4.4: "Speculator Ed's Level 2 indicator inspired from John Thom's jtRealStats indicator."

This customization:
  • adds selectable DOM bid/ask sizes to be drawn and selectable DOM bid/ask sizes for alerts
  • adds selectable sound files from the Sounds folder for alert warnings
  • adapted BobC's logic for picking those alert audio files
  • alerts print in the Alerts Log with DOM size and price level
  • cumulative depth calculation uses only chosen DOM sizes for totals (this is to the left of the bid/ask numbers)

Set Up:
Chart Properties need to be adjusted for Right margin size. 88 works very well.
Sound files need to be created in the NinjaTrader8 sounds folder if you require specific audio files.

Existing Discussion Thread:


Update Jan 26 2021:
- Removed DLL
 
Suggest other entries I might like
Details: EdsLevel2CustomV1


January 24th, 2021
Size: 5.53 KB
Downloaded: 501 times

Keywords: alert bid/ask dom level2 eds
Trend GRaBer Indicator for FIO 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is the TrendGRaBer, ORIGINALLY created by @ Aligator. His NT7 version can be found HERE, and the NT8 version he created is on NT's EcoSystem HERE.

This indicator is based on a setup by Mrs. Raghee Horner. The credit for the setup goes to Mrs. Horner, and the indicator development to Aligator.

If interested in more information about trading this system, you can watch a webinar she posted HERE.


The indicator is simple, in that it produces 3 moving averages, based on a the High, Close and Low. These 3 MAs produce a channel. Prices that close ABOVE the channel are painted based on the bar's Open-Close relationship. Prices BELOW in a similar fashion. Closes in between the upper/lower channel a different color, also based on the individual bar's Open-Close relationship.

The indicator updates in real-time, on each tic.

The MA types available are:
  • EMA
  • SMA
  • HMA
  • WMA
  • DEMA
  • TMA
  • TEMA
  • ZLEMA

Again, this indicator is not my idea, but based on the setup by Mrs. Horner, and the indicator built by Aligator.




---EDIT - 24January2020---
This indicator was renamed to Trend GRaBer with proper citations provided.
 
Suggest other entries I might like
Details: Trend GRaBer Indicator for FIO


January 22nd, 2021
Size: 14.01 KB
Downloaded: 784 times

Keywords: aligator graber horner raghee trend
Market Replay CL 02-21 (NT8)
NT 8 Market Replay data for CL

Contract: CL 02-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 02-21 (NT8)


January 21st, 2021
Size: 173.87 MB
Downloaded: 30 times
HMAwaveSmooth 5 *
Hello Traders...
This is another adaptation of the HMA. Big Mike built a similar indie years ago for NT7 and it was based on the EMA. I like the HMA because it hugs price better and changes direction sooner. This indie paints 2 HMAs that trail the primary HMA by x candles. This HMA can be smoothed by an EMA of 1 or greater periods. In addition you can color the background based on the slope of the HMA. As with many of my recent indicators, they only calculate what is on the screen. The indie will not show if you scroll back until you hit F5 to recalculate. There is a button on the axis to hide the indicator, so you can bring it into view, evaluate and hide it to declutter your chart. You can add a few characters to the button to differentiate from other indicator buttons.

In the pic is an HMA34, Smoothed by 2 and with the wave 3 bars back.

Trade Well
Bob

r1 (1/23/2021) Max Value for Smooth and HMAback were limited to 100, now open.

r2 (2/11/2021): I don't use Bloodhound or other automated tools, but one user found that this indie does not work with Bloodhound. I found that the problem is with the calculations limited to what is on screen... I found the issue and it is an easy fix. In the zip are two indicators. HMAwaveSmooth is the original that only calculates what is on the screen and HMAwaveSmoothFull calculates the entire history and works with Bloodhound. I will add a new version of all of the indicators that I have posted that have the calculation limiter in a similar manner.
r3 (7/8/2021): changed the description of "Smooth" in the user panel to "Smooth(EMA)" as this is actually the EMA of the HMAwave. By minimizing the HMA, the wave becomes an EMA wave. The HMA can only be set to a minimum of 2, as it is limited by the NT8 HMA function. Both the original and the "Full" version are in the zip.
 
Suggest other entries I might like
Details: HMAwaveSmooth


January 21st, 2021
Size: 13.79 KB
Downloaded: 399 times
EMASlope 5 *
We like our MA's to show us the slope. An astute trader asked if I could color the EMA different colors for different slopes. This indie will paint two colors for positive and two colors for negative depending on slope. The slope triggers are set to 30 and 60 degrees in pic, but are adjustable. label in the right margin indicates the indicator and is colored same as the indicator line.

This indie has a button to enable or disable the indie. I find this handy to have several values of the indie so I can de-clutter my chart, but still look at other values of EMA. In the pic is a 21 and a 55 EMA that can be hidden with the click of the button. You can set the column that the button shows in.

R1 July 22, 2021: A friend was using this indie with an oscillator as the input and when the oscillator max'd out at zero or 100 (no more slope) the color defaulted to the negative slope. I added code to default to the EMAflat slope if the slope goes to zero.
R2 Aug 14,2021: I found an error that colored the lines improperly when the 'Use Angle' was not selected....

Trade Well...
Bob
 
Suggest other entries I might like
Details: EMASlope


January 19th, 2021
Size: 6.69 KB
Downloaded: 463 times
PriceLineRR 5 *
Hello Traders, after downloading and using the Price Line indie that I downloaded from FIO, I decided that it would be nice to see where Stops might be as the price moves around. You can make these lines +/- ticks from the current price. In the pic, they are set to 20 ticks. The Plum colored lines are 20t above and below the current price.

There is also a button along the X-axis that allows you to enable or disable the indie if needed.

Trade Well...
Bob


R1: 2/5/2021. Trader NgoLimit wanted a shorter price line. I changed the minimum length to 1, so it will draw thru the current candle to 1 candle back.
R2: 7/8/2021. I added PriceLineRRatr to the ZIP. PriceLineRRatr draws the RR lines X ATRs above and below the current price. The ZIP now includes both indies. Thanks Brett for the suggestion.
 
Suggest other entries I might like
Details: PriceLineRR


January 19th, 2021
Size: 11.08 KB
Downloaded: 355 times
IV Percentile 5 *
The Implied Volatility (IV) Percentile indicator attempts to gauge IV. This is a simple oscillator that returns an IV value from 0 to 100 Percent that's within a selectable lookback period. The user can compare the IV value to either an adjustable axis Value or against a Simple Moving Average.

This is not to be confused with IV Rank which is similar in function but uses a more simplistic calculation.

I have used this indicator as a filter for several mechanical strategies.


Remember...

When the VIX is high, itís time to buy. When the VIX is low, itís time to go.

This indicator was compiled using NinjaTrader 8.0.23.1 64-bit
 
Suggest other entries I might like
Details: IV Percentile


January 16th, 2021
Size: 3.36 KB
Downloaded: 317 times
Better Bar Timer 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is a BETTER bar timer for NT.

This does the same thing the standard bar-timer that ships with NT does, except its better.

You can customize this one to be as subtle or obnoxious as you want it to be.

FONT CONTROL: It will allow you complete control over the text. This includes font style, font weight, text size, the color, etc.

FONT PLACEMENT: You can place it ANYWHERE on the screen. You can start with the origin points to include any of the 4 corners on the chart.

OFFSETS: Included with that standard placement, you can offset it from the edges by n-pixels. So after you place it, you can adjust it both horizontally AND vertically.

PRETEXT: I created this as I think the standard bar-timer takes up unnecessary space. I myself just like to see the clock-time, as it takes up less space. Here, you can leave it BLANK(default), or add in your own CUSTOM text. So if you like the standard timer, you could input "Time remaining = " for example, and it would be like the standard one. DO NOT USE escape characters, like backslashes in the pretext input field.

See image below for example of adding pretext.


NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.


---EDIT - V4 20January2020---
As per suggestion of @locky, and wanting to minimize space(purpose of this indie), you can now toggle on independently, and in any combination, the display of Hours, Minutes or Seconds. E.g., No need to show hours for a sub-hour chart.



---EDIT - V3 19January2020---
There was a bug with this indicator NOT saving the text style in templates or a workspace. This bug should be fixed now. Apologies for inconvenience. Thanks to @mrlucky1x for finding this bug

---EDIT - V2 16January2020---
Version two of this indicator will have a box around the text. By default it will be set to transparent, so you won't see it unless you change the color. Opacity setting is also there so you can make the box color more/less transparent.
 
Suggest other entries I might like
Details: Better Bar Timer


January 15th, 2021
Size: 4.48 KB
Downloaded: 559 times

Keywords: bar timer
Absolute Strength V2 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is an Absolute Strength indicator.

This indicator was converted to NT8 using THIS page.

This is not my creation, I simply did the conversion from the above link.

Some links from different places describing what it is about:
LINK
LINK

---EDIT---- Added V2, 6Jan2020
This simply changes the shading scheme, where instead of shading from the bottom, it shades in-between the two lines that are produced.
 
Suggest other entries I might like
Details: Absolute Strength V2


January 6th, 2021
Size: 14.43 KB
Downloaded: 545 times

Keywords: absolute asi strength
Max Daily Volume Indicator 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

This is a simple indicator that highlights the maximum volume achieved during the day... AS IT DEVELOPS.

The max volume is reset at the START of your session template's start time, and as a newer higher volume is made, that bar is highlighted. You can select the color of the volume plot in the 'plots' section, and the color of the highlight you desire in the 'parameters section.

This indicator update onEachTic() like the standard volume indicator does.

There is not much to this indicator, but someone requested it in THIS thread. By the time I got around to building it, someone already posted one, so I did not post this version. Just posting it in the case someone else needs such an indie.

Again, this was not my idea, but was built on someone else's specs in the above thread.
 
Suggest other entries I might like
Details: Max Daily Volume Indicator


January 6th, 2021
Size: 3.02 KB
Downloaded: 219 times

Keywords: max session volume
Market Replay CL 01-21 (NT8)
NT 8 Market Replay data for CL

Contract: CL 01-21



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 01-21 (NT8)


December 20th, 2020
Size: 175.37 MB
Downloaded: 40 times
Market Replay ES 12-20 (NT8) 4 of 4
NT 8 Market Replay data for ES

Contract: ES 12-20 - Part 4 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-20 (NT8) 4 of 4


December 20th, 2020
Size: 126.05 MB
Downloaded: 92 times
Market Replay ES 12-20 (NT8) 3 of 4
NT 8 Market Replay data for ES

Contract: ES 12-20 - Part 3 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-20 (NT8) 3 of 4


December 20th, 2020
Size: 256.00 MB
Downloaded: 88 times
Market Replay ES 12-20 (NT8) 2 of 4
NT 8 Market Replay data for ES

Contract: ES 12-20 - Part 2 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-20 (NT8) 2 of 4


December 20th, 2020
Size: 256.00 MB
Downloaded: 90 times
Market Replay ES 12-20 (NT8) 1 of 4
NT 8 Market Replay data for ES

Contract: ES 12-20 - Part 1 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-20 (NT8) 1 of 4


December 20th, 2020
Size: 256.00 MB
Downloaded: 96 times
Account Equity Guard NT8 strategy 5 *
Coded by bcomas October 2020. Email me for improvements or suggestions

Equity guardian. When the account drops or reach the targets the strategy close all the positions and disable ALL the strategies working.
Connection lost email advise feature. (NT Mail service should be setted ; Options - Share services...)
 
Suggest other entries I might like
Details: Account Equity Guard NT8 strategy


November 29th, 2020
Size: 2.89 KB
Downloaded: 312 times
Market Replay CL 12-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 12-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-20 (NT8)


November 26th, 2020
Size: 239.94 MB
Downloaded: 45 times
Nested Fractals 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

Fractals are a common bar pattern, created in a consecutive 3-bar series, where the bar in the middle is higher than the two on either side. This creates a fractal high.

In this indicator, that is created by what I have labeled as "Level 1." (see properties section in image).

This indicator also creates FRACTALS OF FRACTALS. So that means, if a Level 1 fractal exists, and has a LOWER Level 1 fractal on both sides of it, it creates a Level 2 fractal high.

This is done up to Level 5, and creates a series of swing points.

The indicator can display dots or numbers.

The parameter labeled "show triggers" shows an arrow with the corresponding color, WHERE on the chart the most recent fractal swing was actually confirmed. I.e., a Level 1 fractal high is confirmed at the END of the third bar.

The marker offset simply raises the marker text higher or lower above the bar.

I dunno what use this has, but is one of the experiments I have laying around, so thought I'd post it?

NOTE: Installing this indicator will create a folder called "BTMM," that's where the indicator will be.
 
Suggest other entries I might like
Details: Nested Fractals


November 24th, 2020
Size: 4.60 KB
Downloaded: 415 times

Keywords: fractal fractals swing zag zig
ADR with Projection Lines V2 4 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

IMPORTANT: Read before install. This is an Average DAILY range indicator, so you MUST have at least the number of days you are setting your ADR to compute an ADR. This includes weekends that don't have data. So if it does not work, MAKE sure you have enough days loaded. E.g., if you are trying to display a 14-day average, but only have 10 actual days of data(excluding weekends), the indicator will return a null value(∞).
------------------------------------------------------------

This indicator will display an ADR on your screen. It will also display projections of that ADR as the day progresses.

As the range is extended, the lines will adjust until the ADR is achieved... The lines will then LOCK in place, change color and remain FIXED for the rest of the session. The image attempts to show this.

The lines produced are projections, NOT predictions. The lines are simply the result of subtracting the ADR from the CURRENT daily High to plot the LOW projection, and the opposite to plot the HIGH projection. This is why the lines will adjust and shrink as the range expands.

Setting "AutoScaleLines" to true, will autoscale so that the lines are always in view on your chart. I.e., this will shrink the bars.

The on-Screen text should be self-explanatory, but the label of "complete" simply describes the current day's range as a percentage of the ADR. E.g., a value of 50% tells you the CURRENT day's range is 1/2 the ADR.

You can either on-screen display, lines or both.

The indicator will update in real-time, on each tic.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.

->UPDATE(26Nov2020): V2 of Indicator. Added new Parameter called Last-Bar SmartFit. This parameter will push the ADR(the lines) to the LOD(Low of Day) or HOD(High of Day), on the LAST bar in the session. This will occur when the ADR is NOT achieved on that day.

It works by putting the range on whichever came FIRST(LOD or HOD). THis is mostly visual, as I like to see visually, by how much the ADR was missed. Mostly just an easier way to see historical data. This adjustment will ONLY occur on the LAST bar of the session.

THIS image below attempts to explain what the new parameter is doing.
 
Suggest other entries I might like
Details: ADR with Projection Lines V2


November 21st, 2020
Size: 5.08 KB
Downloaded: 594 times

Keywords: adr average daily range session
Session Open Horizontal Offset Zones 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

Simple indicator that will plot up to 3, opaque boxes/zones, a fixed n-TICS above/below what your session's Open price is.

This indicator updates on-each-tic/real time by default(can change to onbarClose if not needed).

You can toggle and modify the horizontal session break line.

Setting "AutoScaleBoxes" to true, will autoscale so that the ENTIRE box is in view on your chart. I.e., this will shrink the bars.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.
 
Suggest other entries I might like
Details: Session Open Horizontal Offset Zones


November 12th, 2020
Size: 3.20 KB
Downloaded: 324 times

Keywords: boxes open session sessions zones
View the winning 'starred entries' Market Replay CL 11-20 (NT8)
Winning Entry November 1st, 2021 to December 1st, 2021 [1 votes]

NT 8 Market Replay data for CL

Contract: CL 11-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 11-20 (NT8)


October 24th, 2020
Size: 179.24 MB
Downloaded: 41 times
Vertical Time Lines Version 1.01 5 *
These allow the selection and drawing of 'vertical' lines that are programmable for size, type, color and time.

I use these to mark the critical times during the Open, IB and Close. Also can be used in conjunction with a Horizontal Lines add-on to easily see time periods in a Box type of presentation on both axes of the chart. The code was created by ABC Trading Group as:

JMVerticalLinesNT8,
Version 1.01
 
Suggest other entries I might like
Details: Vertical Time Lines Version 1.01


October 19th, 2020
Size: 3.08 KB
Downloaded: 227 times
Intra-Session boxes v2 5 *
Note: If you find bugs, have feature requests, or anything else, post in THIS thread.

Simple indicator that will plot up to 3, opaque boxes, n-hours beyond what your session start is. Useful for users that like to delineate a day into various sessions for observation.

AGAIN: The input for the box's start and end times is NOT a clock time, it is a decimal hours beyond whatever you session start is. If you input 5.25 for a start time, it will start the box at 5 hours and 15 minutes beyond your session's start time.

The input for the hours is a decimal, so you can tailor it to your needs. This indicator updates on-each-tic/real time, and will show the upcoming boxes for the current session, even if it is not active yet.

Note, installing this indicator will create a folder in your indicators called "BTMM", that's where the indicator will be.

-UPDATE(17Oct2020): Fixed description in 'properties' section for "start/end" times. This was just a visual bug, and does not impact functionality of indicator. Thanks to Romus for finding this bug.
 
Suggest other entries I might like
Details: Intra-Session boxes v2


September 23rd, 2020
Size: 3.52 KB
Downloaded: 295 times

Keywords: session sessions
louiswelt 5 *
Many thanks to JonnyBoy who has converted the range bar marker "jtRangeMarker_N7" to NT8.

For range bars only. This indicator plots the maximum high or minimum low of a forming Range Bar. The plots disappear as soon as a new bar forms or the current bar has filled its required range. Draws a box around the current candle that indicates how much further a bar would have to move before the range is exhausted and new bar begins to paint.
 
Suggest other entries I might like
Details: louiswelt


September 22nd, 2020
Size: 3.63 KB
Downloaded: 181 times

Keywords: counter jtrangemaker range rangemaker
Market Replay CL 10-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 10-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 10-20 (NT8)


September 21st, 2020
Size: 172.08 MB
Downloaded: 47 times
Market Replay ES 09-20 (NT8) 4 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 4 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 4 of 4


September 15th, 2020
Size: 151.43 MB
Downloaded: 126 times
Market Replay ES 09-20 (NT8) 3 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 3 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 3 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 123 times
Market Replay ES 09-20 (NT8) 2 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 2 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 2 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 130 times
Market Replay ES 09-20 (NT8) 1 of 4
NT 8 Market Replay data for ES

Contract: ES 09-20 - Part 1 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-20 (NT8) 1 of 4


September 15th, 2020
Size: 250.00 MB
Downloaded: 130 times
Stochastic Price Action and Cum Delta 5 *
Hello Traders, starting with the GEM Stoch, I added a Stoch of the Order Flow Cum Delta. You can select if you want UDT or BA. By loading two instances of this indie you can show both Stoch of BA and UDT. In addition, you can add weight to the PA or the CUM Delta. I like watching the regular Stoch, overlayed with BA and with UDT. In this way, I can see when there is absorption going on. In this pic are instances of the standard GEM Stoch , an instance of StochPACD with UDT weighed 4:1 and an instance of StochPACD with BA weighed 4:1.

R1: An astute trader found that the indie was not selectable on the chart. I have resolved that.

If you downloaded the original version, it went into the "gem" directory. You will need to use your Windows File Manager and delete that prior to installing this one... Sorry!!!

Also, in this ZIP is a 'lite' version that only calculates what is shown on the screen. If you want to scroll back, hit f5 to refresh the screen.

Trade Well
Bob
 
Suggest other entries I might like
Details: Stochastic Price Action and Cum Delta


September 11th, 2020
Size: 19.31 KB
Downloaded: 586 times
Market Replay CL 09-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 09-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 09-20 (NT8)


August 26th, 2020
Size: 196.43 MB
Downloaded: 63 times
Multi-Volume profile chart template 3 *
Here's the last chart template.
It's for NinjaTrader 8 Orderflow+ RTH, 1, 3 and 30 day profile.

This one is based on the CL.

I don't know if making the 30 day into a 90 day for contracts with longer rollover dates would work or not


cheers,
Brett
 
Suggest other entries I might like
Details: Multi-Volume profile chart template


July 27th, 2020
Size: 5.53 KB
Downloaded: 703 times

Keywords: profile volume
CongestionBoxOne 5 *
A few traders have asked if the CongestionBox could be altered to trigger with a breakout of one candle. I did some work and here is a solution that I believe works well with one candle breakout. One candle means there may be some false breakouts depending on your candle size....

As always, trade well....
Bob

As with other recent indies, this only calculates and displays what is on the display. If you scroll left, hit f5 to repopulate

8/6/2020
After suggestions from a few traders, I added some filtering to remove some of the 'counter trend' boxes. Included in this zip is an additional CongestionBox indie called CongestionBoxFilter. This one uses an EMA and HMA. A Bullish breakout candle will paint if the breakout candle is above both and slope of the HMA is up. The breakout candle can be painted for highlight and or an arrow below bull candle or above bear candle.

Have fun...
Bob

R2 (2/11/2021): I don't use Bloodhound or other automated tools, but one user found that calculations limited to what is on screen causes a problem with Bloodhound... I found the issue and it is an easy fix. In the zip are two indicators. CongestionBoxOne is the original that only calculates what is on the screen and CongestionBoxOneFull calculates the entire history and should work with Bloodhound. I will add a new version of all of the indicators that I have posted that have the calculation limiter in a similar manner.
 
Suggest other entries I might like
Details: CongestionBoxOne


July 23rd, 2020
Size: 12.47 KB
Downloaded: 467 times
ATRTicks 5 *
Modified version of the standard ATR indicator to display in ticks.
Installs in "SeeT" folder.
 
Suggest other entries I might like
Details: ATRTicks


July 23rd, 2020
Size: 1.64 KB
Downloaded: 190 times
DataDownload NT8 ver 8.0.22.2 or higher Strategy for downloading large sets of symbols at once 5 *
You may want to download daily bars for the full list of SP500 index components, for lat 10 years.

1) Import the attached strategy in NT8
2) Start a Strategy Analyzer, set it up, choose SP500 list
3) Set the output folder path
4) Run. Strategy will go and download any missing data (a data connection needs to be up)
5) Enjoy a folder with individual files (named by Instrument.FullName property) daily bars
 
Suggest other entries I might like
Details: DataDownload NT8 ver 8.0.22.2 or higher Strategy for downloading large sets of symbols at once


July 20th, 2020
Size: 1.70 KB
Downloaded: 174 times
Market Replay CL 08-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 08-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 08-20 (NT8)


July 19th, 2020
Size: 221.53 MB
Downloaded: 57 times
Divergence Indicators (Very Simple) 5 *
Update 7/22/20: added CD volume filter to the CumDelta Divergence indies and reduced calculations to only displayed candles.

Hello Traders, there are 3 indies in this Zip. Two of them (CDDivergence) require Ninjas Order Flow Cum Delta. One uses BA Cum Delta and the other is UpDownTick Cum Delta and paint the candle body if price is going the opposite direction of the Cum Delta.

The other indie will paint the candle body if price is going the opposite direction of the calculated HeikenAshi bar.

They alert you to when something is going on.... is it churn or a reversal? In the pic, the HADivergence is Yellow....Try them with various candle types and see what 'speaks" to you...

Note to users... I have started cutting down the system resource requirements on many of my indicators that do not need a lot of historical data. On these indies, they calculate only what is on the screen. If you want to scroll back, just hit f5 to re-populate the indicator. It's not a huge savings, but every tick counts

Trade Well...
Bob

R1 2/11/2021: I don't use Bloodhound or other automated tools, but one user found that the calculations limited to what is on screen may not work with Bloodhound... I found the issue and it is an easy fix. In the zip are multiple indicators. The original files are still in the Zip and I have added files with "Full" appended to the name that calculates the entire history and should work with Bloodhound. I will add a new version of all of the indicators that I have posted that have the calculation limiter in a similar manner.
 
Suggest other entries I might like
Details: Divergence Indicators (Very Simple)


July 16th, 2020
Size: 17.41 KB
Downloaded: 453 times
CongestionBoxLite 5 *
Hello Traders, attached is the CongestionBox indie that has been put on a diet. The indie finds congestive candle patterns and then paints the box when there is a breakout (2 candles to confirm). The box has a line that represents the VPOC of the box. I find that this indie, in concert with an MA of your choice works very well to find and keep you in a trend.

A few years ago, I downloaded the CongestionBox indie as submitted by creator jabeztrading. The indie had memory building and slow response issues. The bandaids that I applied at the time were a help so I re-released it. I have learned a few things along the way, and made some dramatic improvements wrt memory and responsiveness. On my system, a refresh of the old indie took 13seconds. This one is about 1 second.

Note to users... I have started cutting down the system resource requirements on many of my indicators that do not need a lot of historical data. On these indies, they calculate only what is on the screen. If you want to scroll back, just hit f5 to re-populate the indicator. It's not a huge savings, but every tick counts

Trade Well...
Bob
 
Suggest other entries I might like
Details: CongestionBoxLite


July 16th, 2020
Size: 7.73 KB
Downloaded: 300 times
LargeTrades Strategy NT8 5 *
Coded by bcomas July 2020. Email me for improvements or suggestions.

Trading the major transactions that have taken place during
short period of time and at the same price (Limit buyer / seller)

Scalping 1 minute timeframe . Catching the excess of volume.


Updated Version at October 2020

Download at: https://ninjatraderecosystem.com/user-app-share-download/largetrades-strategy-nt8-update/

* Days of the week
* OrderFlow Cumulative Delta option (Life time licences only)
* Boost if profit using the ATM option
* BreakEven option
* Halt trading if the account drops or reach the account target
* Prior Day HL visulal on chart

- Optimized for the Futures instrument MYM
- Fixed minor bugs

Parameters

vol = 150;
fix = 1;

// StopLoss & ProfitTarget
UseProtectiveStops = true;
StopLoss = 80;
ProfitTarget = 100;

// Daily Target
Contracts = 1;
DailyLossLimit = -100;
DailyProfitLimit = 100;
DailyTradesCount = 1;

// Email alerts
UseEmail = false;
EnableEntryAlert = false;
EnableExitAlert = false;
toEmailAddress = @"";

// Times
Session1 = true;
Session1Start = 0;
Session1End = 223059;

Session2 = false;
Session2Start = 90000;
Session2End = 110000;

Session3 = false;
Session3Start = 120000;
Session3End = 125900;
 
Suggest other entries I might like
Details: LargeTrades Strategy NT8


July 4th, 2020
Size: 9.83 KB
Downloaded: 1060 times
Cleaned up version 5 *
Hello,

I've cleaned up the template, added weekly pivots to it along with daily pivots from Lizard indicators. Couldn't find the daily pivot zip though.

Also included a simple cumulative delta divergence indicator created by Bobc635 in the app store.

Edit: I just realized there's a 3rd party counter that won't transfer unless you have @tradetheplandan tradetheplan dot com tools and indicators.

Note:
If anyone is using the VLC indicator from VolumeLadderTrading dot com, I have a pretty good template. As well as indicators from TradeThePlan Just PM me
 
Suggest other entries I might like
Details: Cleaned up version


June 29th, 2020
Size: 31.41 KB
Downloaded: 514 times
Reset All Sim Accounts - Add-On 5 *
If you test numerous variations of your strategies using different SIM account, you know how annoying it is having to reset each one. It takes several mouse clicks just to rest one. So I made this add-on that resets all of them easily. It has saved me tons of time and headache.

To use - Goto New -> Reset All Sim Accounts
 
Suggest other entries I might like
Details: Reset All Sim Accounts - Add-On


June 28th, 2020
Size: 2.98 KB
Downloaded: 210 times

Keywords: reset sim
Tick Counter and Time displayed next to current bar 5 *
Displays Tick Counter and Time next to current bar.
Fonts can be changed for each
 
Suggest other entries I might like
Details: Tick Counter and Time displayed next to current bar


June 25th, 2020
Size: 2.72 KB
Downloaded: 354 times

Keywords: counter tick time
HOD - Head-Up Display 3 *
Simple but useful heads up display.

Show/Hide - Bid/Ask Lines, or extend them.
Show/Hide - Prior ,High, Open, and Low
Show/Hide - Spread
Show/Hide - Tick Count
Show/Hide - Bar % Complete

Something very simple that a default chart lacks.

I hope you find it useful.

6/28 - Newer version with options to change text colors
 
Suggest other entries I might like
Details: HOD - Head-Up Display


June 25th, 2020
Size: 6.14 KB
Downloaded: 334 times
Point of Control 5 *
Shows notch displayed on the price bar where the highest volume was traded.
Requires NT lifetime license for orderflow functionality.
 
Suggest other entries I might like
Details: Point of Control


June 25th, 2020
Size: 1.60 KB
Downloaded: 494 times

Keywords: control of point
Volume profile template for NT8 lifetime license 5 *
Hello,

I'm not sure if this is the right place but I wanted to share a template for NT8 lifetime license.
It incorporates a 3 day and 1 day volume profile along with vwap. In addition it incorporates SIM 22's ED's levels.

Add your favorite pivots for a better feel.

If this is located in the wrong area, I apologize.

brett

EDIT: The 3 day profile is from the Mind over markets: Dalton
Another good book is Anatomy of a Volume Profile Trader: Learn tips and strategies for trading the Volume Profile: Bruce Levy
 
Suggest other entries I might like
Details: Volume profile template for NT8 lifetime license


June 25th, 2020
Size: 15.28 KB
Downloaded: 669 times
Market Replay ES 06-20 (NT8) 5 of 5 5 *
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 5 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.005"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 5 of 5


June 20th, 2020
Size: 142.16 MB
Downloaded: 129 times
Market Replay ES 06-20 (NT8) 4 of 5 5 *
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 4 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 4 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 111 times
Market Replay ES 06-20 (NT8) 3 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 3 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 3 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 101 times
Market Replay ES 06-20 (NT8) 2 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 2 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 2 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 99 times
Market Replay ES 06-20 (NT8) 1 of 5
NT 8 Market Replay data for ES

Contract: ES 06-20 - Part 1 of 5



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-20 (NT8) 1 of 5


June 20th, 2020
Size: 250.00 MB
Downloaded: 129 times
Market Replay CL 07-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 07-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 07-20 (NT8)


June 19th, 2020
Size: 257.45 MB
Downloaded: 91 times
ZigZagTicks 5 *
This is a modified version of the standard ZigZag NT indicator. Input is swing size in ticks.
I was looking for a lightweight swing indicator to use in another project and decided to modify the standard one.

Installs in a folder called "SeeT".
 
Suggest other entries I might like
Details: ZigZagTicks


May 25th, 2020
Size: 4.22 KB
Downloaded: 309 times

Keywords: swing ticks zigzag
Market Replay CL 06-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 06-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 06-20 (NT8)


May 25th, 2020
Size: 190.95 MB
Downloaded: 56 times
Market Replay CL 05-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 05-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 05-20 (NT8)


April 19th, 2020
Size: 249.82 MB
Downloaded: 85 times
Squeeze 5 *
Version 1.0

gemSqueeze is a modified squeeze indicator that also brackets bars during the squeeze to help visually identify breakouts.
 
Suggest other entries I might like
Details: Squeeze


April 12th, 2020
Size: 15.29 KB
Downloaded: 1134 times

Keywords: breakout momentum squeeze volatility
RVOL V1 4 *
This is a relative volume indicator. I have manually gathered volume data and performed the calculations to verify that the indicator is accurate.

It is based on time, so cannot be used on non-time-based bars. If you do so, it will, at best, show nothing. At worst, it might blow up on you.

It calculates the average volume for the bar with the same Close() time over the previous X number of days. The value of X is input by the user.

It then compares the volume of the current bar to the average volume for that time of day. A negative result means that the current bar has below average volume and a positive result means the current bar has greater than average volume.

Be aware that the greater the number of days being averaged and the shorter the duration of the bars, the longer it'll take to plot the values. I hope the community finds this indicator useful.

Edit:
Oh, and I want to also let you know that if there are fewer days on the chart than what's entered in the lookback parameter (or whatever I called it), the indicator will provide the value based on the number of days available. Just be sure you have days enough on the chart to give you the values you're looking for.

Edit 2:
In answer to the question about a similar indicator for range bars, I'm afraid the logic won't hold up for that. This indicator looks for bars with the same time stamp from prior days. Range bars close at totally random times, based on how far price moves. It's very, very unlikely there'd EVER be one on a prior day that closed at the same time as a range bar from the current day.
 
Suggest other entries I might like
Details: RVOL V1


April 5th, 2020
Size: 3.16 KB
Downloaded: 466 times
CandleStickDoctor_NT8 5 *
gemCandleStickDoctor
version: 1.1.1
Note: Found and fixed a bug and added an additional pattern, as well as the ability to paint the entire bar or just the outline

This indicator identifies candlestick patterns as bars develop and historically. You can click on the bars to see the pattern identified. The core of the patterns uses those in the Ninjatrader CandleStick Pattern indicator. Additional patterns have been added and this searches for ALL the patterns. If more than one pattern is identified, it will show you all of them. The indicator also keeps score based on the patterns identified (bullish + 1, bearish - 1) which is exposed as a series named Trigger so you can use it for other indicators or strategies. If there are any CandleStick pattern experts out there that want to add patterns or find any errors with those already present, please let me know and perhaps we can make this even better.

Also note: There is an NT7 version of the site. bitDavid identified some errors (thank you). That version will not be supported. Pleasure use the current NT8 version.

Current patterns identified are:

NoSignal
BearishBeltHold
BearishEngulfing
BearishHarami
BearishHaramiCross
BullishBeltHold
BullishEngulfing
BullishHarami
BullishHaramiCross
DarkCloudCover
Doji
DownsideTasukiGap
EveningStar
FallingThreeMethods
Hammer
HangingMan
InvertedHammer
MorningStar
PiercingLine
RisingThreeMethods
BullishShootingStar
BearishShootingStar
StickSandwich
ThreeBlackCrows
ThreeWhiteSoldiers
UpsideGapTwoCrows
UpsideTasukiGap
BullishTweezerBottom
BearishTweezerTop
BullishKicker
BearishKicker
BullishDragonflyDoji
BearishDragonflyDoji
BullishGravestoneDoji
BearishGravestoneDoji
BullishThreeBarReversal
BearishThreeBarReversal
 
Suggest other entries I might like
Details: CandleStickDoctor_NT8


April 4th, 2020
Size: 15.04 KB
Downloaded: 650 times
Margin Plot 4 *
Plot Account Balance, Intraday Margin*Lots, Excess Intraday Margin(if available in control panel from broker).

You must select the account in the indicator parameters.
 
Suggest other entries I might like
Details: Margin Plot


March 26th, 2020
Size: 2.32 KB
Downloaded: 205 times

Keywords: plot margin
Multi Period Candles for NT-8 5 *
This imports as a Chart Style not an Indicator.

***Note*** After you import this Chart style, you will have to re-start NinjaTrader. ***End Note***

I tried using an indicator that was built to plot multi-period candles but I found it was resource "heavy".
Additionally the indicator had some issues when used on different Trading Hour Templates.

The result was to modify the "Box" Chart Style that was built into NT-8 to plot a Candlestick.

The default color choices were based on my preferences for Black background charts,
You will need to decide on your own preferences and then save them as a default on your platform.

Special thanks are due to @TWDsje (aka SpeculatorSeth) for his coding expertise in completing this task.
 
Suggest other entries I might like
Details: Multi Period Candles for NT-8


March 24th, 2020
Size: 2.52 KB
Downloaded: 646 times
Market Replay CL 04-20 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 04-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 04-20 (NT8)


March 18th, 2020
Size: 298.23 MB
Downloaded: 95 times
Market Replay ES 03-20 (NT8) 4 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 4 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.004"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 4 of 4


March 18th, 2020
Size: 41.83 MB
Downloaded: 151 times
Market Replay ES 03-20 (NT8) 3 of 4 5 *
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 3 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 3 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 141 times
Market Replay ES 03-20 (NT8) 2 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 2 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 2 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 146 times
Market Replay ES 03-20 (NT8) 1 of 4
NT 8 Market Replay data for ES

Contract: ES 03-20 - Part 1 of 4



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 03-20.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 03-20 (NT8) 1 of 4


March 18th, 2020
Size: 250.00 MB
Downloaded: 157 times
chart time indicator for lag time charts in ninjatrader 5 *
Chart Time indicator to find Lag in seconds and milliseconds

It will display three things in the upper right corner of the chart:

ē The core time of NT8
ē The chart time of NT8
ē The difference of the two times (if the Chart time is behind the core time, it will be a negative number).

EXAMPLE
Here is an example of what you will see in the upper right corner of your chart when you load the indicator on your chart:

12:29:28:529 12:29:28:257 -00.272

USE
I watch this indicator near the start and end of the regular session when my charts will typically lag the market. While trading these times or any other high volume times, when I see a chart lag, I then use the DOM to ensure I see the fastest pricing information that NT8 offers (that I have found).

I didn't build the indicator, just found it on ninjatrader forum (it seems to me that more people are having problems with the lagging of ninjatrader)
 
Suggest other entries I might like
Details: chart time indicator for lag time charts in ninjatrader


March 6th, 2020
Size: 2.62 KB
Downloaded: 204 times
QQE (Quantitative Qualitative Estimation) 5 *
This is simply a conversion of the QQE for NT7 by Fat Tails.
Please refer to his post in the NT7 downloads section for details.
 
Suggest other entries I might like
Details: QQE (Quantitative Qualitative Estimation)


February 29th, 2020
Size: 6.83 KB
Downloaded: 859 times

Keywords: divergence qqe qualitative quantitative rsi
ATR in Tick and USD 5 *
This is a fork from Lizard's amaATR's 1.1 version and when installed will also be put into the Lizard folder as "atrTick". Essentially, I created this because ATR is such an important concept and the way the current indicators are built is to give a value based on points. This makes "at a glance" analysis hard because you need to do some arithmetic.

This indicator will display the ATR in either ticks or dollars and will make your chart or Market Analyzer cleaner as comparisons between different instruments makes more sense. In the 15M screenshot provided, it looks like /YM moves the most on the default ATR, but because of it's point value it actually moves less than the /ES and /NQ in terms of dollar value. Another great example is /ZB. It doesn't move many ticks, but it's dollar amount is comparable to the /ES

V 1.1
Fixed the archive and a rounding error for the dollar value, so you should get the exact dollar amount relative to ticks.
 
Suggest other entries I might like
Details: ATR in Tick and USD


February 23rd, 2020
Size: 5.64 KB
Downloaded: 563 times
Market Replay CL 03-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 03-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 03-20 (NT8)


February 18th, 2020
Size: 219.29 MB
Downloaded: 76 times
RSIOMA for NT-8 5 *
In response to a request from @bobwest this is an NT-8 version of the RSIOMA ported from MetaTrader by @ivanjocic and converted to NT-8 by @Prtester

Here is a link to the NT-7 version for your reference:


This indicator takes two moving averages, calculates their RSI (Relative Strength Index) and then also adds a moving average of the calculated RSI. These two lines now can accurately signal the trend changes. They are shown in the separate window where they change from 0 to 100. Additional histogram indicator is shown for quick reference below the lines.

On the picture the bold blue line is RSI of the moving averages, the thin violet line is its moving average. RSI above MA and RSI above level 50 is a signal of a bullish trend. RSI below MA and RSI below level 50 is a signal of a bearish trend. One can also buy when the RSI breaks level 20 from below and sell when RSI breaks level 80 from above, but those are weaker signals. Histogram provides quick reference. Green lines signal BUY, red signal SELL, magenta mean overbought, blue mean oversold.
 
Suggest other entries I might like
Details: RSIOMA for NT-8


February 11th, 2020
Size: 3.77 KB
Downloaded: 975 times

Keywords: nt-8 rsioma
gwaSuperDrive 4 *
This was forked and converted from I am not taking any credit other then the effort I put in with the help of some others on this forum to get this converted and working successfully in NT8.

Tested on NT 8.0.20.1 64bit

version 1.1

Shows momentum and volatility
Sell when Red opens above Green
Buy when green opens above Red

Enjoy and happy trading!



Change Log
-------------
v1.1
* Fixed import issue, by exporting Ninjascript properly with the export tool

v1.0
converted to NT8
 
Suggest other entries I might like
Details: gwaSuperDrive


February 10th, 2020
Size: 10.21 KB
Downloaded: 880 times
Bband2 with Color for NinjaTrader 8 5 *
Conversion to NinjaTrader 8 of the "Bband2 with Color" from NinjaTrader 7. ( found here. )

Exported using NinjaTrader 8 version: 8.0.15.1

Feb. 16, 2020 - Updated drawing logic to improve drawing performance. Please update your copy using this new version.
 
Suggest other entries I might like
Details: Bband2 with Color for NinjaTrader 8


January 25th, 2020
Size: 5.63 KB
Downloaded: 509 times
SOAP NT8
Hello again folks,

I created a version of the SOAP(Served On A Platter) indicator from think or swim. It is similar to the Custom TDI I submitted several weeks ago and similar rules apply. It's a layering of stochastics and I included a layered stochastic RSI for a little more information that allows for precision entries/exits. As with the TDI, you'll have to import the indicator settings into your charts. Happy Trading!
 
Suggest other entries I might like
Details: SOAP NT8


January 24th, 2020
Size: 58.88 KB
Downloaded: 222 times

Keywords: soap
Market Replay CL 02-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 02-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 02-20 (NT8)


January 18th, 2020
Size: 170.64 MB
Downloaded: 84 times
Custom Trader Dynamic Index (TDI) NT8 4 *
Hey guys, I've discovered a custom TDI that can be created without coding. All the indicators are available if you have NT8. Instructions are as follows:

Double stochastics 10 period; Scale justification - right

SUM 3 period; Input series - RSI period 13; Scale justification - overlay
SUM 18 period; Input series - RSI period 13; Scale justification - left
Bollinger; Input series - RSI period 13; Scale justification - right; Period 34, Standard deviations - 2 (Set upper and lower band to transparent to hide or you can leave them if you prefer)

* Best trade set ups for longs is when the 2 SUMs are above or crossing the middle Bollinger band and double stochastic is oversold. The reverse is true for shorts. You can also trade it when fast SUM crosses slow SUM just like other oscillators. It's useful to have it on different time frames and you can adjust the period setting to fit your trading needs. Play around with it and let me know how it works for you!

*The Download is a copy of my indicator template that you'll have to import into your charts or you can follow the instructions to create it yourself.
 
Suggest other entries I might like
Details: Custom Trader Dynamic Index (TDI) NT8


December 22nd, 2019
Size: 52.70 KB
Downloaded: 423 times
Market Replay CL 01-20 (NT8)
NT 8 Market Replay data for CL

Contract: CL 01-20



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 01-20 (NT8)


December 20th, 2019
Size: 191.85 MB
Downloaded: 89 times
Market Replay ES 12-19 (NT8) 3 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 3 of 3


December 20th, 2019
Size: 62.99 MB
Downloaded: 124 times
Market Replay ES 12-19 (NT8) 2 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 2 of 3


December 20th, 2019
Size: 250.00 MB
Downloaded: 131 times
Market Replay ES 12-19 (NT8) 1 of 3
NT 8 Market Replay data for ES

Contract: ES 12-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 12-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 12-19 (NT8) 1 of 3


December 20th, 2019
Size: 250.00 MB
Downloaded: 138 times
Formula Indicator 5 *
Formula indicator which allows you to generate new series on the fly by formula

Simple formula examples:
CLOSE(0) / CLOSE(1)
(HIGH(0) - LOW(0)) / 2
MATH-LOG10(CLOSE(0))
CLOSE(0) / VALUE(SMA(14), 0)
(CLOSE(0) / CLOSE(1)) * 14
VALUE(SMA(BARS-ARRAY(0),14), 0)
VALUE(SMA(14), 0) - VALUE(EMA(14), 0)


Comparison to NinjaScript syntax (left is formula expression - right is NinjaScript/C# expression):
CLOSE() - Close
CLOSE(0) - Close[0]
VALUE(VOL(),0) - VOL()[0]
VALUE(CLOSE(), 0) - Close[0]
BARS-ARRAY(0) - BarsArray[0]
VALUE(SMA(BARS-ARRAY(0), 14), 0) - SMA(BarsArray[0], 14)[0]
VALUE(SMA(14),0) - SMA(14)[0]
VALUE(MACD(12,26,9),0) - MACD(12,26,9)[0]
MATH-LOG10(CLOSE(0)) - Math.Log10(Close[0])

Supported Price Series:
CLOSE, OPEN, HIGH, LOW, WEIGHTED, TYPICAL, MEDIAN

Supported Indicators:
ADL, ADX, ADXR, AroonOscillator, ATR, BOP, CCI, CMO, DEMA, DisparityIndex, DM, EMA, FOSC, HMA, KAMA, LinReg, LinRegIntercept, LinRegSlope, MACD, MAMA, MAX, MFI, MIN, Momentum, OBV, ParabolicSAR, PFE, Range, RIND, ROC, RSI, RSquared, StdDev, SMA, StochRSI, SUM, TEMA, TMA, TSF, TSI, UltimateOscillator, VMA, VOL, WilliamsR, WMA, ZLEMA

Supported math functions:
MATH-ABC, MATH-LOG, MATH-LOG10, MATH-EXP, MATH-SQRT, MATH-ACOS, MATH-ASIN, MATH-ATAN, MATH-ATAN2, MATH-CEILING, MATH-COS, MATH-COSH, MATH-E, MATH-FLOOR, MATH-IEEEREMAINDER, MATH-MAX, MATH-MIN, MATH-PI, MATH-POW, MATH-ROUND, MATH-SIN, MATH-SINH, MATH-TAN, MATH-TANH

Also attaching tests results which can help you to see different combination of formulas:
[OK] "4 + 2" (expected: 6 actual: 6)

[OK] "5 - 2" (expected: 3 actual: 3)
[OK] "6 / 2" (expected: 3 actual: 3)
[OK] "7 * 2" (expected: 14 actual: 14)
[OK] "7 * 2 + 4" (expected: 18 actual: 18)
[OK] "(3 * 2) + 5" (expected: 11 actual: 11)
[OK] "VALUE(SMA(20), 0) - VALUE(SMA(10), 0)" (expected: -0.000764999999999016 actual: -0.000764999999999016)
[OK] "( ( VALUE(SMA(14), 0) - VALUE(SMA(14), 1) ) / VALUE(SMA(14), 1) ) * 100" (expected: 0.0148253190666608 actual: 0.0148253190666608)
[OK] "MATH-ABC(5)" (expected: 5 actual: 5)
[OK] "MATH-ABC(-5)" (expected: 5 actual: 5)
[OK] "MATH-ABC( VALUE(WilliamsR(14), 0) )" (expected: 21.8750000000039 actual: 21.8750000000039)
[OK] "MATH-LOG(MATH-EXP(9.9))" (expected: 9.9 actual: 9.9)
[OK] "MATH-LOG10(0.105)" (expected: -0.978810700930062 actual: -0.978810700930062)
[OK] "MATH-LOG10(0.5)" (expected: -0.301029995663981 actual: -0.301029995663981)
[OK] "MATH-LOG10(0.798)" (expected: -0.0979971086492706 actual: -0.0979971086492706)
[OK] "MATH-LOG10(CLOSE(0))" (expected: 0.0450881615428167 actual: 0.0450881615428167)
[OK] "MATH-SQRT(2870.3)" (expected: 53.5751808209734 actual: 53.5751808209734)
[OK] "MATH-ACOS(45)" (expected: NaN actual: NaN)
[OK] "VALUE(CLOSE(), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "CLOSE(0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(OPEN(), 0)" (expected: 1.1091 actual: 1.1091)
[OK] "OPEN(0)" (expected: 1.1091 actual: 1.1091)
[OK] "VALUE(HIGH(), 0)" (expected: 1.10985 actual: 1.10985)
[OK] "HIGH(0)" (expected: 1.10985 actual: 1.10985)
[OK] "VALUE(LOW(), 0)" (expected: 1.1089 actual: 1.1089)
[OK] "LOW(0)" (expected: 1.1089 actual: 1.1089)
[OK] "VALUE(WEIGHTED(), 0)" (expected: 1.1093875 actual: 1.1093875)
[OK] "WEIGHTED(0)" (expected: 1.1093875 actual: 1.1093875)
[OK] "VALUE(MEDIAN(), 0)" (expected: 1.109375 actual: 1.109375)
[OK] "MEDIAN(0)" (expected: 1.109375 actual: 1.109375)
[OK] "VALUE(TYPICAL(), 0)" (expected: 1.10938333333333 actual: 1.10938333333333)
[OK] "TYPICAL(0)" (expected: 1.10938333333333 actual: 1.10938333333333)
[OK] "VALUE(ADL(), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(BARS-ARRAY(0)), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(CLOSE()), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADL(SMA(1)), 0)" (expected: -182256.34354221 actual: -182256.34354221)
[OK] "VALUE(ADX(14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(BARS-ARRAY(0), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(CLOSE(), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADX(SMA(1), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(ADXR(10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(BARS-ARRAY(0),10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(CLOSE(), 10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(ADXR(SMA(1), 10,14), 0)" (expected: 22.575677726387 actual: 22.575677726387)
[OK] "VALUE(AroonOscillator(14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(BARS-ARRAY(0), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(CLOSE(), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(AroonOscillator(SMA(1), 14), 0)" (expected: 71.4285714285714 actual: 71.4285714285714)
[OK] "VALUE(ATR(14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(BARS-ARRAY(0), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(CLOSE(), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(ATR(SMA(1), 14), 0)" (expected: 0.000755675079148666 actual: 0.000755675079148666)
[OK] "VALUE(BOP(14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(BARS-ARRAY(0), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(CLOSE(), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(BOP(SMA(1), 14), 0)" (expected: 0.183493073342715 actual: 0.183493073342715)
[OK] "VALUE(CCI(14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(BARS-ARRAY(0), 14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(CLOSE(), 14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CCI(SMA(1),14), 0)" (expected: 120.133261300689 actual: 120.133261300689)
[OK] "VALUE(CMO(14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(BARS-ARRAY(0), 14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(CLOSE(), 14), 0)" (expected: 45.0980392156965 actual: 45.0980392156965)
[OK] "VALUE(CMO(SMA(1), 14), 0)" (expected: 45.0980392157274 actual: 45.0980392157274)
[OK] "VALUE(DEMA(14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(CLOSE(), 14), 0)" (expected: 1.10915796254563 actual: 1.10915796254563)
[OK] "VALUE(DEMA(SMA(1), 14), 0)" (expected: 1.10915796254565 actual: 1.10915796254565)
[OK] "VALUE(DisparityIndex(25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(BARS-ARRAY(0), 25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(CLOSE(), 25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DisparityIndex(SMA(1),25), 0)" (expected: 0.118721312343214 actual: 0.118721312343214)
[OK] "VALUE(DM(14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(BARS-ARRAY(0), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(CLOSE(), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM(SMA(1), 14), 0)" (expected: 29.6009497977994 actual: 29.6009497977994)
[OK] "VALUE(DM.DiPlus(14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(BARS-ARRAY(0), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(CLOSE(), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiPlus(SMA(1), 14), 0)" (expected: 28.5818630008438 actual: 28.5818630008438)
[OK] "VALUE(DM.DiMinus(14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(BARS-ARRAY(0), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(CLOSE(), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(DM.DiMinus(SMA(1), 14), 0)" (expected: 10.0017764240038 actual: 10.0017764240038)
[OK] "VALUE(EMA(14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(CLOSE(), 14), 0)" (expected: 1.10847618080925 actual: 1.10847618080925)
[OK] "VALUE(EMA(SMA(1), 14), 0)" (expected: 1.10847618080927 actual: 1.10847618080927)
[OK] "VALUE(FOSC(14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(BARS-ARRAY(0), 14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(CLOSE(), 14), 0)" (expected: -0.00837003346463134 actual: -0.00837003346463134)
[OK] "VALUE(FOSC(SMA(1), 14), 0)" (expected: -0.00837003285063601 actual: -0.00837003285063601)
[OK] "VALUE(HMA(14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(CLOSE(), 14), 0)" (expected: 1.10938436506785 actual: 1.10938436506785)
[OK] "VALUE(HMA(SMA(1), 14), 0)" (expected: 1.10938436506827 actual: 1.10938436506827)
[OK] "VALUE(KAMA(2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(BARS-ARRAY(0), 2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(CLOSE(), 2,10,30), 0)" (expected: 1.10848323049355 actual: 1.10848323049355)
[OK] "VALUE(KAMA(SMA(1), 2,10,30), 0)" (expected: 1.10848323049357 actual: 1.10848323049357)
[OK] "VALUE(LinReg(14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(BARS-ARRAY(0), 14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(CLOSE(), 14), 0)" (expected: 1.10949285715126 actual: 1.10949285715126)
[OK] "VALUE(LinReg(SMA(1), 14), 0)" (expected: 1.10949285714447 actual: 1.10949285714447)
[OK] "VALUE(LinRegIntercept(14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(BARS-ARRAY(0), 14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(CLOSE(), 14), 0)" (expected: 1.10712142856302 actual: 1.10712142856302)
[OK] "VALUE(LinRegIntercept(SMA(1), 14), 0)" (expected: 1.10712142856986 actual: 1.10712142856986)
[OK] "VALUE(LinRegSlope(14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(BARS-ARRAY(0), 14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(CLOSE(), 14), 0)" (expected: 0.000182417583710548 actual: 0.000182417583710548)
[OK] "VALUE(LinRegSlope(SMA(1), 14), 0)" (expected: 0.000182417582661881 actual: 0.000182417582661881)
[OK] "VALUE(MACD(12,26,9),0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(BARS-ARRAY(0),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(CLOSE(),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD(SMA(1),12,26,9), 0)" (expected: 0.000525976279517115 actual: 0.000525976279517115)
[OK] "VALUE(MACD.Diff(12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(BARS-ARRAY(0), 12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(CLOSE(), 12,26,9), 0)" (expected: 0.000182642769187317 actual: 0.000182642769187317)
[OK] "VALUE(MACD.Diff(SMA(1), 12,26,9), 0)" (expected: 0.000182642769187236 actual: 0.000182642769187236)
[OK] "VALUE(MAMA(0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(BARS-ARRAY(0), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(CLOSE(), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA(SMA(1), 0.5,0.05), 0)" (expected: 1.10830451536214 actual: 1.10830451536214)
[OK] "VALUE(MAMA.Fama(0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(BARS-ARRAY(0), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(CLOSE(), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAMA.Fama(SMA(1), 0.5,0.05), 0)" (expected: 1.10758123649033 actual: 1.10758123649033)
[OK] "VALUE(MAX(14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(BARS-ARRAY(0), 14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(CLOSE(), 14), 0)" (expected: 1.1094 actual: 1.1094)
[OK] "VALUE(MAX(SMA(1), 14), 0)" (expected: 1.10940000000002 actual: 1.10940000000002)
[OK] "VALUE(MFI(14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(BARS-ARRAY(0), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(CLOSE(), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MFI(SMA(1), 14), 0)" (expected: 72.5214668756238 actual: 72.5214668756238)
[OK] "VALUE(MIN(14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(BARS-ARRAY(0), 14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(CLOSE(), 14), 0)" (expected: 1.10695 actual: 1.10695)
[OK] "VALUE(MIN(SMA(1), 14), 0)" (expected: 1.10695000000002 actual: 1.10695000000002)
[OK] "VALUE(Momentum(14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(BARS-ARRAY(0), 14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(CLOSE(), 14), 0)" (expected: 0.00229999999999997 actual: 0.00229999999999997)
[OK] "VALUE(Momentum(SMA(1), 14), 0)" (expected: 0.00230000000000175 actual: 0.00230000000000175)
[OK] "VALUE(OBV(), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(BARS-ARRAY(0)), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(CLOSE()), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(OBV(SMA(1)), 0)" (expected: -970154 actual: -970154)
[OK] "VALUE(ParabolicSAR(0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(BARS-ARRAY(0), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(CLOSE(), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(ParabolicSAR(SMA(1), 0.02,0.2,0.02), 0)" (expected: 1.10808073403957 actual: 1.10808073403957)
[OK] "VALUE(PFE(14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(BARS-ARRAY(0), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(CLOSE(), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(PFE(SMA(1), 14,10), 0)" (expected: 0.856455637395163 actual: 0.856455637395163)
[OK] "VALUE(Range(), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(BARS-ARRAY(0)), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(CLOSE()), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(Range(SMA(1)), 0)" (expected: 0.000950000000000006 actual: 0.000950000000000006)
[OK] "VALUE(RIND(3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(BARS-ARRAY(0), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(CLOSE(), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(RIND(SMA(1), 3,10), 0)" (expected: 47.1788350678776 actual: 47.1788350678776)
[OK] "VALUE(ROC(14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(BARS-ARRAY(0), 14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(CLOSE(), 14), 0)" (expected: 0.207749977418478 actual: 0.207749977418478)
[OK] "VALUE(ROC(SMA(1), 14), 0)" (expected: 0.207749977418635 actual: 0.207749977418635)
[OK] "VALUE(RSI(14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(BARS-ARRAY(0), 14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(CLOSE(), 14,3), 0)" (expected: 65.4724695863047 actual: 65.4724695863047)
[OK] "VALUE(RSI(SMA(1), 14,3), 0)" (expected: 65.4724695863158 actual: 65.4724695863158)
[OK] "VALUE(RSquared(8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(BARS-ARRAY(0), 8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(CLOSE(), 8), 0)" (expected: 0.498626377789318 actual: 0.498626377789318)
[OK] "VALUE(RSquared(SMA(1), 8), 0)" (expected: 0.498626370943076 actual: 0.498626370943076)
[OK] "VALUE(StdDev(14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(BARS-ARRAY(0), 14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(CLOSE(), 14), 0)" (expected: 0.000796612726947466 actual: 0.000796612726947466)
[OK] "VALUE(StdDev(SMA(1), 14), 0)" (expected: 0.000796612726947901 actual: 0.000796612726947901)
[OK] "VALUE(SMA(14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(CLOSE(), 14), 0)" (expected: 1.10830714285714 actual: 1.10830714285714)
[OK] "VALUE(SMA(SMA(1), 14), 0)" (expected: 1.10830714285716 actual: 1.10830714285716)
[OK] "VALUE(StochRSI(14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(BARS-ARRAY(0), 14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(CLOSE(), 14), 0)" (expected: 0.860111194913672 actual: 0.860111194913672)
[OK] "VALUE(StochRSI(SMA(1), 14), 0)" (expected: 0.860111194913856 actual: 0.860111194913856)
[OK] "VALUE(SUM(14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(BARS-ARRAY(0), 14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(CLOSE(), 14), 0)" (expected: 15.5162999999999 actual: 15.5162999999999)
[OK] "VALUE(SUM(SMA(1), 14), 0)" (expected: 15.5163000000003 actual: 15.5163000000003)
[OK] "VALUE(TEMA(14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(CLOSE(), 14), 0)" (expected: 1.10945373542596 actual: 1.10945373542596)
[OK] "VALUE(TEMA(SMA(1), 14), 0)" (expected: 1.10945373542599 actual: 1.10945373542599)
[OK] "VALUE(TMA(15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(BARS-ARRAY(0), 15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(CLOSE(), 15), 0)" (expected: 1.10825546875 actual: 1.10825546875)
[OK] "VALUE(TMA(SMA(1), 15), 0)" (expected: 1.10825546875001 actual: 1.10825546875001)
[OK] "VALUE(TSF(3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(BARS-ARRAY(0), 3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(CLOSE(), 3,14), 0)" (expected: 1.11004010990239 actual: 1.11004010990239)
[OK] "VALUE(TSF(SMA(1), 3,14), 0)" (expected: 1.11004010989245 actual: 1.11004010989245)
[OK] "VALUE(TSI(3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(BARS-ARRAY(0), 3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(CLOSE(), 3,14), 0)" (expected: 38.3448003003004 actual: 38.3448003003004)
[OK] "VALUE(TSI(SMA(1), 3,14), 0)" (expected: 38.344800300326 actual: 38.344800300326)
[OK] "VALUE(UltimateOscillator(7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(BARS-ARRAY(0), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(CLOSE(), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(UltimateOscillator(SMA(1), 7,14,28), 0)" (expected: 55.4425069497896 actual: 55.4425069497896)
[OK] "VALUE(VMA(9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(BARS-ARRAY(0), 9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(CLOSE(), 9,9), 0)" (expected: 1.10822574301695 actual: 1.10822574301695)
[OK] "VALUE(VMA(SMA(1), 9,9), 0)" (expected: 1.10822574301697 actual: 1.10822574301697)
[OK] "VALUE(VOL(), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(BARS-ARRAY(0)), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(CLOSE()), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(VOL(SMA(1)), 0)" (expected: 4476 actual: 4476)
[OK] "VALUE(WilliamsR(14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(BARS-ARRAY(0), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(CLOSE(), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WilliamsR(SMA(1), 14), 0)" (expected: -21.8750000000039 actual: -21.8750000000039)
[OK] "VALUE(WMA(14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(CLOSE(), 14), 0)" (expected: 1.10870238095518 actual: 1.10870238095518)
[OK] "VALUE(WMA(SMA(1), 14), 0)" (expected: 1.10870238095293 actual: 1.10870238095293)
[OK] "VALUE(ZLEMA(14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(BARS-ARRAY(0), 14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(CLOSE(), 14), 0)" (expected: 1.10933885376531 actual: 1.10933885376531)
[OK] "VALUE(ZLEMA(SMA(1), 14), 0)" (expected: 1.10933885376534 actual: 1.10933885376534)
 
Suggest other entries I might like
Details: Formula Indicator


December 14th, 2019
Size: 3.39 KB
Downloaded: 409 times
BTOpeningRange v2 5 *
This is an upgrade from the original BTOpeningRange indicator by Jason Chan (bearishtrader).
The v1 indicator didn't print the open price, only the High/Low range. The open price plot is now available.
Also, you can configure when to stop the plot. By default, the plot will stop when the regular session ends.
The plots, colors and times are all configurable in the properties screen.

I searched high and low for a free, simple indicator with the open range and price. Hopefully this will be useful for anyone looking for the same thing
 
Suggest other entries I might like
Details: BTOpeningRange v2


December 10th, 2019
Size: 2.99 KB
Downloaded: 552 times
Market Replay CL 12-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 12-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 12-19 (NT8)


November 28th, 2019
Size: 186.36 MB
Downloaded: 81 times
Convert Market Replay(NRD) to CSV and Import ticks format 5 *
This strategy allows you:
- convert market-replay(NRD) to CSV format (for each day separately)
- convert market-replay to NinjaTrader ticks import format (*.Last.txt, *.Ask.txt, *.Bid.txt)

How to use it:
1) Connect to Market Replay Connection
2) In strategy tab add MarketReplayDumpStrategy and select Contract you're trying to convert for example ES 09-19(make sure that you have any market replays for that contact). TimeFrame of strategy do not matter, same as DaysToLoad, but better select 1 day to load it faster.
3) Make sure folder from strategy settings exists
4) Enable the strategy and watch Output window

* Dump process can be multi-threaded, you can control that via MaxDegreeOfParallelism
* Creation of import data is single threaded since it is writing to one file
* Strategy will automatically detect life time of contact by expiration/rollover dates from NinjaTrader, and adds extra 3 days before and after
* Once conversion process is done strategy will disable itself
* When importing(Tools->Import->Historical Data) set "Time Zone of imported Data" to your NinjaTrader TimeZone(Tools->Options->General->Time Zone)
* Tested on 8.0.19.1 64-bit
 
Suggest other entries I might like
Details: Convert Market Replay(NRD) to CSV and Import ticks format


November 25th, 2019
Size: 161.72 KB
Downloaded: 166 times
RSI in Laguerre Time with Fractal Energy 5 *
This is a NT8 converted version of the TOS (ThinkOrSwim) indicator.

You can use it to trade reversals or continuation whenever both the RSI Lag and FE are in confluence.

More usage details can be found on the TOS board here:
https://usethinkscript.com/threads/rsi-laguerre-indicator-with-fractal-energy-usage-notes.219/
 
Suggest other entries I might like
Details: RSI in Laguerre Time with Fractal Energy


November 20th, 2019
Size: 7.50 KB
Downloaded: 800 times
CandleCode V1.0 for NT8 5 *
This is a simplified variation of Viktor Likhovidov's digital coding of candlesticks as seen in the September 2001 issue of Stocks & Commodities. Each candlestick is converted into a 3 digit number.

First Digit = High - Open
Second Digit = High - Close
Third Digit = Open - Low

Try it with various bar types and you will see different patterns emerge for minute, range, renko, etc. bar types.

This indie may have value as signaling an entry or exit, especially when used with other indies. Plus, anyone wishing to edit the code will find it very simple and easy to edit.

Those who export their chart data to Excel may find this column of data useful.
 
Suggest other entries I might like
Details: CandleCode V1.0 for NT8


October 23rd, 2019
Size: 1.57 KB
Downloaded: 413 times
Market Replay CL 11-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 11-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 11-19 (NT8)


October 23rd, 2019
Size: 218.68 MB
Downloaded: 83 times
Market Replay CL 10-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 10-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 10-19 (NT8)


September 18th, 2019
Size: 259.80 MB
Downloaded: 121 times
Market Replay ES 09-19 (NT8) 3 of 3 5 *
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 3 of 3


September 14th, 2019
Size: 189.73 MB
Downloaded: 155 times
Market Replay ES 09-19 (NT8) 2 of 3
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 2 of 3


September 14th, 2019
Size: 250.00 MB
Downloaded: 167 times
Market Replay ES 09-19 (NT8) 1 of 3 3 *
NT 8 Market Replay data for ES

Contract: ES 09-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 09-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 09-19 (NT8) 1 of 3


September 14th, 2019
Size: 250.00 MB
Downloaded: 172 times
irROCVolatility Version-1.0 for NT-8.0.17.2 64-bit 5 *
I used to use Excel to calculate and average the end-of-day readings of three different Rate Of Change indicators to see if I could graph the differences in Directional Bias across a number of different Futures contracts (Equities, Treasuries, Currencies, Metals, Energy, Grains) in an effort to decide where to focus my trading efforts and capital.

The exercise was time consuming and not that helpful over the long term which lead me to abandon the project, until recently when I revisited the idea using NT-8.

The different period settings I used for the original project (on a Daily chart) were 10, 25 and 35 (Days),
and (on a Weekly chart) were 2, 5 and 7 (Weeks).

The irROCVolatility indicator displays the average of three different (10, 25, 35) ROC (Rate-of-Change) indicators to assist in highlighting directional bias while indicating increases and decreases in Volatility.

I was surprised by the way the indicator works on the smaller Intraday time frames that many of us use as day traders.

I find it helps when I can't understand what Delta is trying to tell me. Hopefully you'll find it useful too.

Trade well
 
Suggest other entries I might like
Details: irROCVolatility Version-1.0 for NT-8.0.17.2 64-bit


September 12th, 2019
Size: 3.79 KB
Downloaded: 942 times
Market Replay CL 09-19 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 09-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 09-19 (NT8)


August 18th, 2019
Size: 226.32 MB
Downloaded: 99 times
Time Zone Colors (NT8) 5 *
this is version for NT8  
Suggest other entries I might like
Details: Time Zone Colors (NT8)


August 13th, 2019
Size: 4.40 KB
Downloaded: 333 times
Market Replay CL 08-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 08-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 08-19 (NT8)


July 19th, 2019
Size: 220.91 MB
Downloaded: 129 times
Market Replay ES 06-19 (NT8) 3 of 3
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 3 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.003"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 3 of 3


July 2nd, 2019
Size: 223.63 MB
Downloaded: 168 times
Market Replay ES 06-19 (NT8) 2 of 3
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 2 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.002"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 2 of 3


July 1st, 2019
Size: 250.00 MB
Downloaded: 160 times
Market Replay ES 06-19 (NT8) 1 of 3 4 *
NT 8 Market Replay data for ES

Contract: ES 06-19 - Part 1 of 3



Download instructions:

Note this is a multi-part download. After download and before extracting you need to rename this file to "ES 06-19.7z.001"

Dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
  • Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
  • Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
  • The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.


If you are not too familiar with Windows file extensions and your Windows settings, make sure to check this thread out:
 
Suggest other entries I might like
Details: Market Replay ES 06-19 (NT8) 1 of 3


June 30th, 2019
Size: 250.00 MB
Downloaded: 169 times
irDeltaMomentumV2 for NT-8.0.18.1 64-bit 5 *
Indicator updated to Version 2 2019-09-07
Managed to get this sorted out today (finally) for NT-8, with the help of a friend.

As the name implies this is a Delta Momentum indicator (similar to one of the Gomi tools we all used on NT-7).

One thing to note however is that this indicator uses the Order Flow Cumulative Delta that was built into the lifetime license version of NinjaTrader 8 so this will not work with some of the basic versions of the platform.

***Note***
I added some functionality that was missing in the original version (due to my lack of coding skills), this version gives the user the ability to choose the Delta Calculation Type, BidAsk or UpDownTick.

***Note-2***
I'm not sure why, but the file that will download has the original file name even though the indicator included is the corrected version-2.

Enjoy,
TGN
 
Suggest other entries I might like
Details: irDeltaMomentumV2 for NT-8.0.18.1 64-bit


June 25th, 2019
Size: 2.71 KB
Downloaded: 1605 times

Keywords: 2 delta momentum nt-8 version:
Market Replay CL 07-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 07-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay


The file will create a folder with the relevant front month and a series of .nrd files inside (one per day).

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 07-19 (NT8)


June 21st, 2019
Size: 268.85 MB
Downloaded: 99 times
SquareOf9 5 *
Ben Letto's publicly available OpenSource code for Gann Square of 9 lines. These are like fractal areas.

Converted from NT7 to NT8.
 
Suggest other entries I might like
Details: SquareOf9


May 28th, 2019
Size: 6.44 KB
Downloaded: 454 times

Keywords: gann square 9 squareof9
Market Replay CL 06-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 06-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 06-19 (NT8)


May 28th, 2019
Size: 271.36 MB
Downloaded: 93 times
Wicks & Tails 4 *
I've been a fan of Better Renko bars for several years now and was looking for a way to identify when a Wick or a Tail on a Better Renko bar was larger than the setting I had chosen.

Eg., Using a 4 Better Renko bar setting on the ES and looking for Wicks or Tails that were 5 ticks or greater.

This little indicator will do that for you. It simply draws an Arrow symbol above or below the corresponding Wick or Tail.

When I trade the NQ I prefer a 3 Better Renko bar, I use the irWicksandTails indicator to highlight 4 tick Wicks or Tails.

I don't use them for trade entries, I just note when they start to show up and rely on their presence to help me discern a "short term" trend bias.

This indicator is for NT-8, and was compiled with Version 8.0.17.2 64 Bit
 
Suggest other entries I might like
Details: Wicks & Tails


May 8th, 2019
Size: 3.55 KB
Downloaded: 771 times

Keywords: bias candlestick patterns tails trend wicks
ShowBid as Ray Updated Color 5 *
Fixed the color and width of Bid Ask lines for the update.
 
Suggest other entries I might like
Details: ShowBid as Ray Updated Color


May 1st, 2019
Size: 2.12 KB
Downloaded: 172 times
ShowBidAsk wh version
Show Bid Ask with Line segment. Conversion of ShowBid_wh code from NT7 to NT8.
 
Suggest other entries I might like
Details: ShowBidAsk wh version


May 1st, 2019
Size: 2.39 KB
Downloaded: 156 times

Keywords: ask bid line showbidask_wh
ShowBidAsk as Ray
Bid Ask Lines on chart
 
Suggest other entries I might like
Details: ShowBidAsk as Ray


April 30th, 2019
Size: 2.06 KB
Downloaded: 198 times
Macd vs Macd[1] indicator converted to NT8 5 *
I have converted my MACD3 from NT7 to NT8. It shows a blue and yellow line showing the MACD vs the MACD one bar ago.
 
Suggest other entries I might like
Details: Macd vs Macd[1] indicator converted to NT8


April 19th, 2019
Size: 2.07 KB
Downloaded: 538 times

Keywords: macd3
Market Replay CL 05-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 05-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 05-19 (NT8)


April 19th, 2019
Size: 257.12 MB
Downloaded: 113 times
BuySellNetVolume Version 2 for NT8 5 *
Version 2.0 April 12, 2019

Exported with NT Version 8.0.17.2


Indicator Name: fpgBuySellNetVolume_V2 Folder: Cheech

This version functionally replaces the previous version(s) described and available here but does not replace it when this version is installed. The previous version can be removed manually when and if desired.


Enhancements/Changes in Version 2

1. User can select from several MA types for the Moving Average plots, some of which are from Lizard Indicators made available by the GNU license. Credits to Lizard Indicators for both their indicators and the MA selection code.

2. When MA smoothing is selected the type can be an SMA, EMA, or the selected MA type. The smoothing period for each MA (fast, mid, and slow) can be set individually. A MA period of 0 eliminates the smoothing for that MA. Note: The Mid MA can be used as an intermediate period by specifying a value between the fast and slow periods. When the mid MA is requested with zero value for the period (default) will result in the mid period being calculated. If a period is specified and it is not between the fast and the slow the midpoint is calculated and used. No warning message is displayed.

3. The ability to apply volume filters (1-4) against the Net volume thereby limiting the Net volume histogram display a net bar only for the volume specified in the filter(s).

4. More control over how plots are displayed.

5. The divergence marker has been moved from the Total histogram to the Net histogram. This was done because the Total histogram can be turned off. The Net and/or Net filters must be active for the divergence marker to be displayed. If the Filter option is chosen without the Net plots being display the marker will only be display when there is a divergence on a filter value.|

6. The plot for the in-progress bar has its own color and can be user set. This plot is always displayed regardless of the display option selected.

7. This is not a change but a clarification as it also existed in the previous version. The position of the total line (above the line if a buy total and below the line if a sell total) is not based upon the last Close price but on the value (positive or negative) of the Net volume.

Similar to the previous version at times setting the Indicators region Type property to Logarithm is easier to read. The 2 instances of the indicator in the screen shot have the same operation modes set but the bottom one shows some of the ability to control what is displayed. without needing to independently setting each to transparent. If a particular display is turned off the values are still calculated and can be viewed in the Data Box.

Change Log

Date Description
April 12, 2019........Initial release
 
Suggest other entries I might like
Details: BuySellNetVolume Version 2 for NT8


April 12th, 2019
Size: 33.35 KB
Downloaded: 648 times

Keywords: buysellnetvolume tickreplay
irInsideBarsAll for NT-8.0.17.2 64-bit 5 *
As the name implies, this NT-8 indicator looks for Inside Bars and then simply paints an all white bar on your candle stick or OHLC bar chart, (it works on Hollow Candlestick charts also).

If the bar is an Inside Bar and is also a Doji (Open[0] == Close[0]) the indicator will paint a diamond on the close of the bar to highlight the Doji for you.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candlestick outlines and the candle bodies, one color regardless of the direction they close in (up or down). The indicator is set to calculate on bar close. (no need for it to be anything else)

Inside Bar condition: if(High[0] < High[1] && Low[0] > Low[1])
"Doji" condition: if(Open[0] == Close[0])

As I said, it's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".
 
Suggest other entries I might like
Details: irInsideBarsAll for NT-8.0.17.2 64-bit


April 6th, 2019
Size: 2.33 KB
Downloaded: 694 times

Keywords: bars candlestick inside patterns
Market Replay CL 04-19 (NT8)
NT 8 Market Replay data for CL

Contract: CL 04-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this

contract, meaning, this is data relevant only to when the contract becomes the

front month.
 
Suggest other entries I might like
Details: Market Replay CL 04-19 (NT8)


March 26th, 2019
Size: 228.39 MB
Downloaded: 121 times
TickRefresh 5 *
This indicator allows chart updates on each tick or price change with a user defined refresh time interval.

Settings:
Refresh Time Interval in Milliseconds = Number of milliseconds between chart refreshes.
Under "Set up > Calculate" choose between updates on each tick or each price price change.

Example values for Refresh Time Interval in Milliseconds:
0 = update on every tick or price change.
1 = maximum of 1000 updates per second.
10 = maximum of 100 updates per second.
20 = maximum of 50 updates per second.
100 = maximum of 10 updates per second.
The sane default is 10 milliseconds. But you can set it to 0 without issues.

See a demos here:



Releases:
Version 1 March 25 2019: Initial release
Version 2 March 26 2019: Removed the TimerEventProcessor for better performance.
Version 3 March 28 2019: Optimized to prevent lag in fast markets if computer cannot keep up.
Version 4 April 4 2019: Improvements to latency and frame rate.
 
Suggest other entries I might like
Details: TickRefresh


March 25th, 2019
Size: 1.74 KB
Downloaded: 315 times
irReversalBarsV3 5 *
Updated previous version to correctly paint on top of other Paint Bar type indicators. March 26, 2019
Download link includes irReversalBarsV3
(for some reason the download link still refers to the previous "V2" version's name??)

This NT-8 indicator simply paints a Bullish Reversal bar or a Bearish Reversal bar on your candle stick or OHLC bar chart, it works on Hollow Candlestick charts also.

You might have to change the default color choices if you're using lighter colored chart backgrounds.

Indicator will color the candle bodies solid regardless of the direction they close in (up or down).
The indicator is set to calculate on bar close. (no need for it to be anything else)

Bullish Reversal condition: if((High[0] > Open[0] && Low[0] < Low[1]) && Close[0] > Open [0])
Bearish Reversal condition: if((High[0] > High[1] && Low[0] < Open[0]) && Close[0] < Open [0])

It's not the Holy Grail, but I find it helpful to have a visual clue that suggests "something may have changed here".

Enjoy,
Trade well.
 
Suggest other entries I might like
Details: irReversalBarsV3


March 21st, 2019
Size: 3.02 KB
Downloaded: 788 times
Trades Navigator (Strategy Analyzer Chart) 4 *
Lets you navigate trade by trade in Chart mode after back-testing in Strategy Analyzer.

How to use it:

1. Run your backtesting in Strategy Analyzer
2. When backtesting is done, select Chart mode
3. Attach indicator
 
Suggest other entries I might like
Details: Trades Navigator (Strategy Analyzer Chart)


March 18th, 2019
Size: 160.40 KB
Downloaded: 282 times
EquitiesV2 5 *
This version is identical in terms of functionality to version 1(which is located here: ).

I added the code (finally) to pull the expiry date from the chart and automatically add it to the indicator, so it no longer needs the user to manually input the date.

This indicator is for equities traders, to compare current performance with the 'other 3' equities and an average of all 4.

It adds data series for ES, NQ, RTY and YM, shows % change for each since the session open (24 hr session, not just the day session) as well as a simple moving average of all 4. The SMA period is user-configurable. Default is 10.

Hope you version 1 users find and download this one.


****
In reply to the comment about getting it to work in a strategy, I have never tried and am not a programming guru, but it seems likely that the 4 equity data series have to be loaded in the initializing sections of the strategy, which is before you call the indicator. The indicator can't load the data series for the strategy because it gets called after the strategy is initialized.
That'd be my guess. That you have to load the 4 data series in the strategy itself for the indicator to access them when it's called.
Good luck!
****
 
Suggest other entries I might like
Details: EquitiesV2


March 9th, 2019
Size: 5.36 KB
Downloaded: 306 times
Market Replay CL 03-19 (NT8) 5 *
NT 8 Market Replay data for CL

Contract: CL 03-19



Download instructions:
dowload and unzip file in NT 8 replay folder Documents\NinjaTrader 8\db\replay
The file will create a folder with the relevant front month and a series of .nrd files inside (one per day)

Make sure to use the "extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder.



Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
 
Suggest other entries I might like
Details: Market Replay CL 03-19 (NT8)


February 22nd, 2019
Size: 244.21 MB
Downloaded: 120 times
BuySellNetVolume-NT8_V1_21 (fpgBuySellNetVolume) 5 *
Notice: This indicator has been deprecated and will no longer supported as it has been replaced by Version 2 posted here

Updated Version 1.21 March 12, 2019

Exported with NT Version 8.0.17.2


Version 1.21 Corrections are described