The PriceActionSwing indicator for NinjaTrader 7.0 calculates swings in different ways and visualize them. It shows swing information like the swing length, duration, volume,... It contains a lot of features. It is also useable on the Market Analyzer.
The package contains 3 indicators: PriceActionSwing
- standard swing indicator with visualization and swing information PriceActionSwingPro
- Draw automatically Fibonacci extensions and retracements
- Calculate a swing statistic
- Calculate and visualize ABC patterns
- Risk management (automatically for ABC patterns)
- Calculate and visualize divergence based on an indicator
- GomCD (uncomment the "region GomCD" parts in the source code) PriceActionSwingOscillator
- swing trend visualization
- developing swing volume (repainting)
Useful to see/trade price action with HH, HL in uptrends and LL, LH in downtrends and patterns like double top/bottom, triangle,…
Version 17 - June 5 2014
- Changed the code structure for simpler access from strategies and other indicators If you use PriceActionSwing within other files, make sure you have a backup from the old version
- Added swing tick and swing percentage calculation
- Added swing calculation based on close values
- Added seperate swing price output
- Added developing GomCD output since the last swing
- Improved risk management items
- Added risk management tab
- Added different alerts
Version 18 - June 15 2014
- Fixed minimum swing size to < 1 for percentage settings
Starting from version 17 NinjaTrader 6.5 will not longer be supported. Starting from version 19 NinjaTrader 7.0 will not longer be supported get NT8 version here
COMPATIBILITY:
NinjaTrader 6.5: NO
NinjaTrader 7.0: YES
NinjaTrader 8.0: NO, see NT8 version here
December 12th, 2016
Size: 59.19 KB
Downloaded: 37172 times
57
dorschden
Exported using NT Version 7.0.1000.11
Indicator will only run on NT 7.0.1000.4 or later.
The VisualSMA is a MTF (multi-timeframe) version of the Simple Moving Average. It will plot on any chart and allows to calculate the moving average
- from minute bars
- from second bars
- from tick bars
- from range bars
- from volume bars
For example you can display an hourly SMA on a 235 tick chart, or display a 11-period SMA calculated from a 500 tick chart on a 7 range chart.
The indicator has three modes to display the moving average:
StrategicMode: The first bar series collects the values from the secondary series without any lag on historical data, but a 1-tick lag on real-time data. This mode does not repaint, but shows the values originally recovered from the secondary bar series. On the chart the indicator in Strategy Mode is plotted yellow.
FirstTickMode: To avoid the lag for similar bars with identical time stamps, the indicator repaints the indicator value for the prior bar, after the first tick of the current bar has been registered. The one-tick repainting reduces the lag. On the chart the FirstTick Mode is shown in red.
Visual Mode: To make it easier to use the indicator visually, the indicator interpolates the distance between two consecutive bars of the secondary bar series. The interpolation algorithm works in real-time and simulates the CalculateOnBarClose = false mode for the indicator relative to the secondary bar series. It repaints the current leg of the indicator back to the prior bar of the secondary series. The interpolation adapts itself to equidistant or non-equidistant charts. The Visual Mode is shown in aqua.
This indicator comes as a protected assembly, so you cannot directly access the code.
Update August 30, 2011: 1-Tick Repainting for VisualMode and FirstTickMode was only enabled for fixed period bars. It is now also available for other bar types.
Update September 6, 2011: Bug fixed. VisualMode interpolation could be a few ticks off on real-time data.
Update November 9, 2011: Indicator entirely recoded, robustness and speed improved, lag reduced.
Update November 23, 2011: Indicator was lagging with CalculateOnBarClose = true setting. Lag is eliminated.
Update January 5, 2012: Option added to select color according to the slope of the VisualSMA. Paintbars added as a trendfilter.
Update August 15, 2012: Code updated to allow for displacement of indicator.
Update September 29, 2012: Renko option removed. Indicator could not always be called from a strategy, bug removed.
Please remove prior versions of the indicator, before installing the new release:
(1) Remove old assembly via File -> Utilities -> Remove NinjaScript Assembly.
(2) Shut down NinjaTrader and restart it.
(3) Install new file via File -> Utilities -> Import NinjaScript.
Just import into NT, and restart NT. You should then have a "BetterRenko" type available in the intervals in the data series window. The brick size is specified in number of ticks.
New twist on Renko to fix some of the quirks of Renko. All data is real data, so should be able to backtest with these bars. A new bar style is also available as a different download called BetterBrick, but it is not required as CandleSticks or OHLC can be used.
V2 changes alignment of first bar to be mod brickSize. In NT65, this is first bar, in NT7 it is first bar of each session.
See forum thread for more information.
NT 6.5: Yes - does not support new bar at session boundary, or new bar style
NT 7.0: Yes
August 8th, 2010
Size: 2.35 KB
Downloaded: 7989 times
593
aslan
Enhancements to GOM MP :
1. Added new SPLIT session mode, that will show AH and RTH profiles together in one chart. Works with other types as well.
2. Added Display profile levels such as Trading Session High, Trading Session Low, Mid, VPOC, Value Area High and Value Area Low
3. Added IB minutes parameter to allow you to set initial balance of your preference. IB parameter is turned off for AH session. IB won’t show if you have bar set to more than IB minutes.
4. Enhanced Developing VPOC function. Displays now straight progressing line for clear visibility.
5. Added Naked Vpoc levels with an option to display closed naked vpocs
6. Added Naked Close (GAP) levels with an option to display closed GAPS
7. Added option to display the naked level date and price level to the right panel
8. Added Summary section below the Profile that displays total profile volume with an option to format kilo, million and no formatting.
9. Added Summary section below the Profile that also display Initial Balance range and Daily range.
10. Added option to compute profiles for all bars on the chart vs on screen bars. This is important for naked levels in the past computation and display on screen without a need to squeeze the chart to naked level day.
Updated 05/21 :
Fixed IB settings for 24/7 & RTH Template;
[IB] summary level display adjustment dynamically to the top of the range.
Updated 05/22 :
Upgraded to GOMi's 4.6 version- Thanks to TimeTrade@BMT
Added a separate Pen style for dVPOC.
Updated 05/23 :
Fixed issue with the price display for currency and Bond markets
Updated 05/25 :
Added option to turn the status message off <8.13>
For this to work, additionally download and compile Hot Key Manager file from here GomHotKeyManager
Updated 05/26 :
Fixed Serialization problem for Fonts
Updated 05/27 :
Added toolbar buttons to set profile attributes.
Added option to show IB for overnight session
Added option to set color for summary text
Added option to set color for naked level text
Added option to show Continuous VA/VPOC/VWAP
Updated 05/28 :
Fixed the screen flicker issue
Updated 08/21 :
Attempt to fix performance problem reported during the RTH session start
March 9th, 2023 05:21 PM MONICAP hello, and thanks for your time developing and sharing this indicator. i want to ask if this could be available for NT8
also. thank you
September 16th, 2022 07:30 PM TomTownsend Very helpful, thank you, and for all you do!!!
February 19th, 2019 06:43 AM Anand Jagdeo good morning. I am fairly new to trading and would like to use this indicator. am i supposed to change the dates for the
se holidays to the current year. Please advise. Seems like a pretty good indicator if applied properly. Thanks
Anand
June 9th, 2017 11:10 AM mercyj does anyone know why I can't set the autoscale to FALSE? it's greyed out. and the pivots are all wacko on the chart
February 25th, 2017 12:27 PM essiar Not sure what I am doing wrong here, I have imported .cs files previously. I am trying to install ALTOGomMP.cs. I alread
y have GomCD, GomCDSMA_UpDown, GomDeltaVol_UpDown and GomRecorderIndicator in my list of indicators. I keep getting erro
r msg CS0246 which states there is a dll file missing. So when I try to install GomMP2.1 I get an error msg stating I ha
ve custom ninjascript files on my pc that have programming errors. So I delete ALTOgom.cs from the bin. I go to import G
omMP2.1 again and I get another error msg saying Archive may contain duplicate method names that already exist or there
is a required file missing. I have been using Ninja for 10 years now and have never run into this issue. Suggestions?
October 13th, 2016 03:28 PM CoCo
August 7th, 2016 07:37 AM dalebru Outstanding, thanks to both you and gomi.