Laguerre MetaTrader indicator — a completely custom indicator that doesn't rely on the standard MT4/MT5 indicators. It shows the weighted trendline in the separate window of the chart. It can be used for easy entry and exit signals.
Input parameters:
gamma (default = 0.7) — multiplier that is used in the line's levels calculation. The higher it is the smoother is the line.
CountBars (default = 950) — the maximum amount of bars for which to calculate this indicator. Set as high as possible if you don't experience performance problems.
This is a modified version of Fat Tail IB bands V38
It has added deviation for a full 4 standard of deviations
""Use at own risk as i am not a professional programmer""
The indicator displays the current open, the initial balance (IB) and upper and lower range bands that are calculated by adding and subtracting fractions of the initial balance to the IB high and IB low.
You can only use this indicator with an appropriate session template. The opening time will align itself to the start time of the RTH session, as specified via session template. The hybrid setting assumes that you want to use the 3rd intraday session as RTH session for FOREX and currency futures and the second session for all other instruments.
Example ES: Select a session template with the following sessions: Session 1 (night session) 15:30 - 8:30 Central Time, Session 2 (RTH) 8:30 - 15:15 Central Time. Select second session for opening range.
Select length of opening period: The length of the opening range can be selected via indicator dialogue box The default setting is 60 minutes.
Multipliers for range bands: The multipliers for the upper and lower range bands can also be changed. The default settings for the bands are 0.5, 1 and 2, meaning that the first upper band is built from the IB high by adding half of the IB range, and similar for the other bands.
Developing range: Prior to the completion of the initial balance, the indicator plots the developing ranges in gray to show that the ranges are still unstable.
Night session or pre-session range: The indicator also has an option to display the full night session, European or Asian session range. This feature is not used with the default settings. I did not add it on purpose, it was already part of the opening range indicator, and it was easier to leave it than to remove it.
European Session Range: You can select start and end time of the European Session in CET (Central European Time). The European Session is pre-configured for the time between 8:00 AM and 1:00 PM CET.
Asian Session Range: You can select start and end time of the Asian Session in TST (Tokyo Standard Time). The Asian Session is pre-configured for the time between 9:00 AM and 3:00 PM TST.
Update June 2, 2011: New signature for GetNextBeginEnd() implemented.
Update June 11, 2011: Small bug removed, indicator did not display opening range and pre-session range correctly during the training period (first bars of the chart, after scrolling to the left horizontally).
Update June 21, 2011: The indicator now works with half-pip FOREX feeds. Indicator dialogue box improved.
Update July 25, 2011: Serialization of the plots and indicator dialogue box changed.
Update January 24, 2012: Offset added, opening period no longer needs to be aligned to session start.
Update February 19, 2012: Option added to cut off the opening range at the next session break.
February 8th, 2013
Size: 9.75 KB
Downloaded: 790 times
1362
greenr
David Varadi's AggregateM++ Mean Reversion Oscillator V1 NT8b9
Quote from the link below:
"The Aggregate M indicator is based on the concept that in the long term the market trends, while in the short-term the market is noisy, and has a tendency to mean-revert. Why not combine the two concepts to keep life simple? The Aggregate M is supposed to reflect an adjusted median that is filtered for short term noise. The median is a far more accurate measure of central tendency than a simple average especially with noisy data. Taking a superior measure of trend and filtering out some of the noise by adjusting for short-term mean reversion creates an even better median. The Aggregate M is now both trend and mean-reversion rolled into one."
March 26th, 2016
Size: 3.52 KB
Downloaded: 920 times
1724
Sim22
Exported with NT7.0.0.18
ChartTrader is a NinjaTrader strategy which acts as an alternative to the inbuilt Chart Trader.
Since the inbuilt chart trader and strategies cannot be used simultaneously i have built this strategy. One can place manual buy sell orders through chart trader.
You will need to download all parts before extraction.
Dowload and unzip all files in NT 8 replay folder Documents\NinjaTrader 8\db\replay
Once an individual part has been downloaded it needs to be renamed according to the number in its sequence
For example, if you are downloading CL 08-21 part 2 of 3, once that file has finished downloaded, you need to rename it into "CL 08-21.7z.002"
Once all files have been downloaded and renamed, right-click on the first one and select "extract here"
Make sure to use the "Extract here" function as shown, and not the "Extract to" function, to avoid the creation of a folder within a folder
The archive will create a folder with the relevant front month and a series of .nrd files inside (one per day)
Note: the archive contains only the dates with the most volume for this contract, meaning, this is data relevant only to when the contract becomes the front month.
November 24th, 2022
Size: 99.00 MB
Downloaded: 21 times
2589
xplorer
Here is a simple mod to the Fat Tails anaRegressionChannel with slope up/down colors. For more information see the original indicator here.
4/26/12 - Replaced with a version that allows the lines to have the correct colors as the chart is scrolled. Originally it was just a real time indicator.
April 27th, 2012
Size: 3.46 KB
Downloaded: 1521 times
1182
eDanny
What is a Fib? Or support/resistance? Or a supply or demand level? All of these terms describe areas on a chart where price action does something; they represent areas where professional traders reveal themselves and their intentions. I had this indicator built by TradingCoders out of Australia, they’ve built many indicators for me and all work extremely well. James, the head developer, can code anything you can think up.
The dpLadder is a swing-based indicator. But what is a swing? It’s a place where price has had a change of heart. I wondered what a chart would look like if, between swing-points, I plotted Fibs. I’m sure many of you had the same thoughts and I decided to automate it. Add the Ladder to your chart. It will automatically use two recent swings as the high and low and plot a Fib between them and will then propagate the ‘rungs’ of the ladder above and below those two swing-points while plotting Fibs between the rungs.
The indicator also has the ability to use a second timeframe and repeat the ladder-building process. So, while my chart may be a 1 minute, internally the indicator can be using a 30-minute data series to plot wider swings and therefore a second set of Fibs. All the Fib lines are color/style/thickness/opacity adjustable.
The controls for the indicator are placed on the chart for fast access. The ‘dpLadder Update’ button will cause the indicator to look for new swing-points. The ‘Show-Hide Fibs’ button will hide the ‘internal’ Fib lines while keeping the primary swing-points, the 0% and 100% lines, which make the rungs of the ladder. The ‘PriceL’ and ‘PriceH’ input fields allow the user to manually choose the swing-points and the indicator will then redraw the chart with those points as the basis for all ladder rungs and Fibs. Input for those fields is entered from the right side.
Polarized Fractal Efficiency. This does not return similar values to the NT supplied PFE, which does not implement the formulas I've found by this name. My indicator's waveform is similar enough to thinkorswim's to conclude that I have implemented the algorithm represented correctly. This indicator does not iterate. Version 1.0.
This indicator allows chart updates on each tick or price change with a user defined refresh time interval.
Settings:
Refresh Time Interval in Milliseconds = Number of milliseconds between chart refreshes.
Under "Set up > Calculate" choose between updates on each tick or each price price change.
Example values for Refresh Time Interval in Milliseconds:
0 = update on every tick or price change.
1 = maximum of 1000 updates per second.
10 = maximum of 100 updates per second.
20 = maximum of 50 updates per second.
100 = maximum of 10 updates per second.
The sane default is 10 milliseconds. But you can set it to 0 without issues.
See a demos here:
Releases:
Version 1 March 25 2019: Initial release
Version 2 March 26 2019: Removed the TimerEventProcessor for better performance.
Version 3 March 28 2019: Optimized to prevent lag in fast markets if computer cannot keep up.
Version 4 April 4 2019: Improvements to latency and frame rate.
November 16th, 2013 05:22 PM noyss Perfect indicator! The only thing, sometimes when I use Replay Data the indicator dissapear and need to reinstall again,
it´s a minor bug...
Thank you so much
August 19th, 2012 08:37 AM john2000
July 5th, 2012 06:20 PM syxforex Thanks for doing this Danny, great to see so many other people liking it too... thanks again
September 15th, 2015 02:35 PM lavender thank you - awesome tool for scalpers!
September 4th, 2015 03:25 PM Japhro Works nicely, but it looks like the last price line colour or width doesn't change when you change it in style settings.
August 29th, 2019 02:00 PM Botts I only recently "stumbled" on this indicator by @Sim22, as usual it's another example of his exemplary coding skills.
Not to mention the indicator itself seems almost "Intuitive" in the way it behaves. Thanks for all the work you did here
in the early days of NT-8 "Beta" and "RC-#".....
March 28th, 2016 04:53 PM kareem40 Thank you. Very good
February 13th, 2024 07:10 AM Leafcutter Great! This NT timelag annoyed me ever since...too bad that I didn´t take a look at this indicator earlier even if I hav
e ssen it here for several times
March 15th, 2023 11:49 AM kv712 Thank you for so humbly sharing your great work...
January 5th, 2023 01:58 PM Yojimbo123 Thank you for looking in to this lagsss problem with NT8
November 12th, 2022 04:41 PM OpalDragon EPIC
SHOULD BE STANDARD IN FOR EVERYONE IN NT
July 4th, 2022 03:35 PM forrestang Absolutely TREMENDOUS my man!!! Found this recently, and I wasn't even aware of the NT limitations, primarily b/c I neve
r really looked into the really quick price movements to trade.
August 13th, 2023 05:44 PM bluedot Thanks for sharing
July 1st, 2023 08:11 PM tcbtrader Wonderful! Thank you so much for sharing with us all. I've used James several times in the past and his indicators are
always top-notch!
June 20th, 2023 12:59 PM JanEva Thanks! It is being very useful to me. It's just what I was looking for.
May 28th, 2023 10:03 PM wcitadel Thank you.
March 10th, 2023 01:42 PM bobw199 Hey THANKS so much awesome indicator, used on a renko chart on the MK2 market went from 50 % line to the next 50 % line,
all day. This makes taking trades so much easier. Puts structure so visible on the chart.